Page 1
swig MINI BAR
hardware
Thank you for purchasing the Swig Mini Bar. This
page
lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
to this product. As you unpack
components
screws
24 - wood
dowels
4 - hinges
8 - large
screws
16 - cam
screws
6 - cam
covers
6 - bolts
2 - pull
screws
Missing hardware? Please call
800.606.6387 for replacements.
6 - flat
washers
1 - pull
16 - cams24 - small
6 - spring
washers
tools required
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
1 - top
panel
1 - partition
1 - large
door
1 - drawer
bottom
Made in Vietnam - r03 Page 1 of 7
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1 - bottom
panel
1- back
panel
1 - small
door
2 - drawer
sides
(1 left, 1 right)
1 - left side
panel
2 - wine rack
shelves
1 - drawer
front
1 - drawer
back
( 1 front, 1 back)
1 - right side
panel
2 - fixed
shelves (1 left, 1 right)
1 - crossbar
Page 2
swig MINI BAR
NOTE: Do not
over tighten the
cam screws
partition
NOTE: Make sure
arrows on each
cam points toward
nearest edge with
holes
A
B
left side
panel
right side
panel
Insert 8 wood dowels, 5 cam screws and 2
cams into partition as shown. Secure, but do not
over tighten, cam screws with a phillips head
screwdriver. Make sure arrows on each cam
1
points toward nearest edge with holes.
left and right
A
fixed shelves
crossbar
B
A) Insert 6 wood dowel, 2 cam screws and 2
cams into left side panel as shown.
B) Insert 6 wood dowels, 3 cam screws and 2
2
cams into right side panel as shown.
top
panel
A) Insert 4 cams into left and right fixed shelves
as shown.
B) Insert 2 cams and 4 wood dowels into
3 4
crossbar as shown.
Made in Vietnam - r03 Page 2 of 7
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Insert 6 cam screws into top panel as shown.
Page 3
swig MINI BAR
NOTE: Make sure cams
are positioned towards
the bottom of assembly
as shown
left side
panel
left fixed
shelf
NOTE: Make sure grooves
of left side panel and
partition are assembled
on the same side
Fit dowels of left side panel and partition into
corresponding holes of left fixed shelf as shown.
Using a screwdriver, turn each cam clockwise until
5
it securely engages each cam screw.
partition
NOTE: Make sure plastic
piece on crossbar faces up
and bends towards the back
of assembly as shown
B
crossbar
A
D
right fixed
shelf
A) Fit dowels of assembly into corresponding holes
of right fixed shelf as shown. Secure cams.
B) Fit dowels of crossbar into corresponding holes
of assembly as shown. Secure cams.
C) Fit dowels of right side panel into
corresponding holes of right fixed shelf. Secure
cams.
D) Fit dowels of crossbar into corresponding
6
holes of right side panel. Secure cams.
C
right side
panel
NOTE: Do not over
tighten the bolts
flat washer
bolt
bottom
panel
Fit dowels of partition and left/right side panels
into corresponding holes of bottom panel as
shown. Secure bottom panel with 6 bolts, 6
spring washers and 6 flat washers as shown,
7 8
using an phillips head screwdriver.
back
panel
With the assistance of another adult, carefully
position unit upright. Slide back panel into
grooves of assembled unit as shown.
Made in Vietnam - r03 Page 3 of 7
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 4
swig MINI BAR
cam cover
B
A
top
panel
back wine
rack shelf
A) Fit dowels of assembled unit into corresponding
holes of top panel as shown. Secure all cams.
B) At this point, cover all exposed cams with cam
9
covers.
front wine
rack shelf
Fit back wine rack shelf into assembled unit as
10
shown.
A
large door
front
B
small door
front
NOTE: Do not over
tighten the screws
pull
A) Attach 2 hinges to small/large door fronts with
2 small screws per hinge as shown. Secure, but
Fit groove of front wine rack shelf into
corresponding groove of back wine rack shelf as
shown.
11 12
Made in Vietnam - r03 Page 4 of 7
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
do not over tighten, screws with a phillips head
screwdriver.
B) Attach pull to small door front with 2 pull
screws as shown, using a screwdriver.
Page 5
swig MINI BAR
door
front
drawer
front
left drawer
side
Refer to Hinge Adjustment
diagram for adjusting the
alignment of the door hinges.
Attach hinges of each door front to left and right
side panels as shown. Secure each hinge with 4
13
small screws, using a screwdriver.
drawer
bottom
14
Fit dowels of inner drawer front into
corresponding holes of left drawer side, and
secure with 2 large screws, using a screwdriver.
drawer
back
Slide drawer bottom into groove of drawer
15 16
Made in Vietnam - r03 Page 5 of 7
assembly as shown.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Fit dowels of drawer back into corresponding
holes of drawer assembly, and secure with 2 large
screws, using a screwdriver.
Page 6
swig MINI BAR
right drawer
side
Fit dowels of drawer assembly into
corresponding holes of right drawer side and
secure with 4 large screws.
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from heat
and water.
Insert drawer assembly into assembled unit as
shown. Push drawer back until you hear a click.
Assembly is now complete.
1817
Made in Vietnam - r03 Page 6 of 7
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 7
swig MINI BAR
hinge adjustment
If the doors do not appear square or aligned,loosen or tighten the appropriate screws on each case hinge as illustrated.
1
A
B
Side to side adjustment:
Loosen screw A, adjust gap with
screw B and re-tighten screw A
2
A
B
Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise
3
C
C
Height adjustment:
Loosen screw C, adjust door
height and re-tighten screw C
Made in Vietnam - r03 Page 7 of 7
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...