Page 1
stern
COUNTER TABLE
hardware
Thank you for purchasing the Stern Counter Table.
This page
Please take the time
the individual components
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from
damage.
Note: 2 people are recommended to safely assemble this
product.
NOTE: Do not over
tighten the bolts.
lists all the contents included in the box.
to identify the hardware as well as
to this product. As you
10 - flat
10 - hex bolts
washers
Missing hardware?
Please call 800.606.6387 for replacements.
tools required
hex wrench (included)
components
2 - leg frames
1 leg frame A, 1 leg frame B)
(
STEP 1) Carefully place tabletop onto a clean,
padded surface. Locate letters on each leg frame
and tabletop. Attach each leg frame to
corresponding letter of tabletop with 2 washers
and 2 hex bolts as shown. Secure, but do not
over tighten, bolts using a hex wrench.
1 - tabletop
STEP 2) At this point secure each leg frame to
A
leg frame
leg frame
STEP 2
A
B
tabletop with 3 washers and 3 hex bolts as
shown.
With the assistance of another adult, carefully
position table upright.
Assembly is now complete.
A
STEP 1
tabletop
Made in India - r06 Page 1 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
B
B
Page 2
stern
COUNTER TABLE
method to adjust levelers on table
leg frame
cleaning and care
leveler
NOTE: Please do the following if your table is
not level.
With the assistance of another adult, adjust
levelers of each leg as necessary.
-Clean surfaces with a dry or damp
soft cloth.
-Do not use abrasive cleaners.
-Re-tighten bolts as necessary.
-Avoid direct sunlight if possible.
-Protect from heat and liquids.
-Do not place hot objects on surface.
-For indoor use only.
-Do not place rubber objects or other
marking objects on surface.
-Do not leave spills unattended as it
may damage the finish. Wipe
immediately.
Made in India - r06 Page 2 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...