Page 1
stella
CABINET
assembly hardware
Thank you for purchasing the Stella Cabinet. This page
lists all the contents included in the box. Please take the
time to identify the hardware as well as the individual
components to this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are recommended to safely assemble this product.
components
12 - wood
dowels
4 - hinges 4 - shelf
12 - large
bolts
supports
12 - medium
bolts
24 - screws
2 - door
pull bolts
mounting hardware
4 - plastic
anchors
Missing hardware? Please call 800.606.6387 for replacements.
4 - small
screws
4 - large
screws
4 - mounting
brackets
tools required
allen wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
2 - wall
straps
1 - top
panel
2 - side panels
(1 left, 1 right)
Made in Vietnam - r05 Page 1 of 5
1 - bottom
panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1 - adjustable
shelf
2 - doors
(1 left, 1 right)
1 - fixed
shelf
1 - leg frame 2 - pulls
1 - back
panel
Page 2
stella
left and right
side panels
CABINET
Note: Do not over
tighten the bolts
fixed
shelf
left side
panel
Insert 6 wood dowels into left and right side
1 2
panels as shown.
right side
panel
Fit dowels of left side panel into corresponding
holes of fixed shelf and secure with 2 large bolts
as shown. Secure, but do not over tighten, bolts
with a phillips head screwdriver.
bottom
panel
A. Fit back panel into corresponding groove of left
side panel as shown.
B. Fit dowels of right side panel into
corresponding holes of fixed shelf and secure with
3 4
2 large bolts as shown.
Made in Vietnam - r05 Page 2 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Fit dowels of left and right side panels into
corresponding holes of bottom shelf and secure
with 4 large bolts as shown.
Page 3
stella
CABINET
top
panel
leg
frame
Note: Make sure arrow
on label points forward
Attach leg frame to bottom panel with 12
5
medium bolts as shown, using an allen wrench.
adjustable
shelf
With assistance of another adult, position unit
upright. Fit dowels of left and right side panels
into corresponding holes of top panel, and secure
6
with 4 large bolts.
Note: Do not over
tighten the screws
left and right
doors
A. Insert 2 shelf supports into each side panel at
desired shelf height. Press firmly to secure.
B. Place adjustable shelf onto corresponding shelf
7 8
supports. Make sure shelf is securely supported.
Made in Vietnam - r05 Page 3 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Attach 2 hinges to the back of each door with 2
screws per hinge. Secure, but do not over tighten,
screws with a screwdriver.
Page 4
stella
CABINET
left and right
doors
Attach hinges of left and right doors to side
Attach 1 pull to the front of each door with 1 door
9 10
pull bolt, using a screwdriver.
panels with 4 screws per hinge.
Assembly is now complete.
hinge adjustment
If the doors do not appear square or aligned, loosen or tighten the appropriate screws on each case hinge as
illustrated.
1
A
B
Side to side adjustment:
Loosen screw A, adjust gap with
screw B and re-tighten screw A
A
Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise
B
2
3
A
B
Height adjustment:
Loosen screw A & B, adjust door
height and re-tighten screws A&B
cleaning and care Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Made in Vietnam - r05 Page 4 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 5
stella
CABINET
C
A
D
E
optional wall mounting instructions
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe
mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.).
Mount to wood studs whenever possible.
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a
qualified professional or your local hardware store.
A. Attach 2 brackets to the top of the assembled unit with 2 small screws per bracket.
B. With the assistance of another adult, place the unit in desired location against the wall. Mark the
location of the hole in the bracket on the wall. Move the unit out of the workspace.
C. Drill holes slightly smaller in diameter than the anchors. Insert 1 plastic anchor into each hole until
they are flush to the wall.
D. Insert 2 large screws through each bracket and plastic anchor. Secure, but do not over tighten with
a phillips head screwdriver.
E. Place the unit back into position against the wall and thread a wall strap through each bracket and
pull until tight.
Wall mounting assembly is now complete.
Made in Vietnam - r05 Page 5 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...