CB2 Helix, Stairway Assembly Instructions Manual
helix BOOKCASE
hardware
Thank you for purchasing the Helix Bookcase. This
page
lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
to this product. As you unpack
components
16 - bolts
2 - adjustable
feet
Missing hardware?
Please call 800.606.6387 for replacements.
2 - screws
2 - plastic
anchors
tools required
phillips head screwdriver
1/4” drill bit
allen wrench (included)
2 - side
supports
(1 left, 1 right)
4 - shelves
Attach 4 shelves to left side support with 2 bolts
per shelf as shown. Secure bolts with an allen
wrench.
1
Made in Taiwan - r06 Page 1 of 2Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
helix BOOKCASE
A
A
B
WALL
A. Attach right side support to shelves of
assembled unit with 2 bolts per shelf as shown.
Secure bolts with an allen wrench.
B. Attach 2 adjustable feet to bottom of each
support as shown. Turn feet clockwise to secure.
2 3
WALL
A
B
NOTE: These instructions are for drywall mounting only.
For safe installation it is essential to use hardware
appropriate for your wall type. Mount to wood wall studs
whenever possible. If you are unsure of what type of
fasteners to use, consult your local hardware store or a
qualified professional.
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do not use
A. With a 1/4” drill bit, drill 2 holes as shown.
Screw the plastic anchors into the holes until
they are flush to the wall.
B. Insert 1 screw through each metal bracket
and into the drywall anchor. Secure, but do not
over tighten with a phillips head screwdriver.
Assembly is now complete.
4
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protect clear lacquer.
With the assistance of another adult, place
shelving unit in desired location against the wall.
Make sure both supports of shelving unit are level.
Mark the location of the hole in the bracket on the
wall. Move the unit out of the workspace.
Made in Taiwan - r06 Page 2 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...