sidecar HIGH DINING TABLE
Thank you for purchasing the Sidecar High Dining
Table. This page
box. Please take the time to identify the hardware as
well as the individual components
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.
Note: 2 people are required to safely assemble this product.
It is recommended that a rubber mallet or other soft surfaced
tool be used for assembly.
lists all the contents included in the
to this product. As
hardware
18 - cam
screws
2 - brackets
4 - small
screws
18 - cams
8 - small
bolts
6 - large
screws
Missing hardware? Please call
800.606.6387 for replacements.
49 - wood
dowels
6 - medium
bolts
6 - levelers
tools required
rubber mallet
allen wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
10 - cam
covers
8 - large
bolts
components
1 - tabletop 1 - left side panel 1 - right side panel 1 - leg frame
1 2 3
1 - back
panel (#1)
shelves (#7)
1 - partition (#2) 1 - top back
7 8
2 - fixed front
shelves (#8)
panel (#3)
4
1 - top front
panel (#4)
1 - bottom crossbar
1 - bottom back
panel (#5)
5 6
1 - top crossbar2 - fixed back
1 - bottom front
panel (#6)
Made in Thailand - r05 Page 1 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
sidecar HIGH DINING TABLE
NOTE: Do not
over tighten the
cam screws
left side
panel
right side
panel
Insert 8 cam screws and 3 wood dowels into left
side panel as shown. Secure but do not over
tighten cam screws with a phillips head
1
screwdriver.
2
partition
Insert 4 cam screws into right side panel as
2
shown.
1
back panel
Insert 2 cam screws and 6 wood dowels into
partition (#2) as shown.
3 4
Made in Thailand - r05 Page 2 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Insert 4 cam screws into back panel (#1) as
shown.
sidecar HIGH DINING TABLE
A
top panel
(back)
3
NOTE: Make sure
arrows on each
cam points toward
nearest edge with
holes
A
bottom panel
(back)
5
4
top panel
(front)
A. Insert 2 cams and 6 wood dowels into top
back panel (#3) as shown. Make sure arrows on
each cam points toward nearest edge with holes.
B. Insert 2 cams and 4 wood dowels into top
front panel (#4) as shown.
5
fixed shelf
7
(back)
A
B
6
B
bottom panel
(front)
A. Insert 2 cams and 6 wood dowels into
bottom back panel (#5) as shown. Make sure
arrows on each cam points toward nearest edge
with holes.
B. Insert 2 cams and 4 wood dowels into bottom
front panel (#6) as shown.
6
Make sure the glossy side
of the top front panel (#4) is
facing down towards the
bottom front panel (#6) as shown.
bottom panel
(front)
fixed shelf
(front)
8
fixed shelf
(front)
8
2
top panel
(front)
4
B
fixed shelf
(front)
6
8
A
B
NOTE: Do not
over tighten the
screws
A. Attach bottom front panel (#6) and top front
panel (#4) to partition (#2). Secure, but do not
A. Insert 3 cams and 6 wood dowels into fixed
back shelf (#7) as shown.
B. Insert 2 cams and 4 wood dowels into fixed
7 8
front shelf (#8) as shown.
Made in Thailand - r05 Page 3 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
over tighten each panel with 2 large screws, using
a screwdriver.
B. Attach 2 fixed front shelves (#8) to partition
(#2) with 1 large screw per shelf as shown.
sidecar HIGH DINING TABLE
Make sure the glossy side
of the top back panel (#3) is
facing down toward the bottom
back panel (#5) as shown, and
that the high gloss edge of
all panels are facing up.
7
top panel
(back)
3
top of unit
NOTE: Make sure taller panels are
attached to the left side panel
using cam screws and dowels
positioned closer to the long edge
of the panel as shown.
7
5
A
bottom panel
(back)
B
fixed shelf
(back)
A. Fit dowels of bottom back panel (#5) and top
back panel (#3) into corresponding holes of
assembled unit.
B. Fit dowels of 2 fixed back shelves (#7) into
corresponding holes of assembled unit as shown.
Make sure the glossy edge of both panels are
facing up. Using a screwdriver, turn each cam
clockwise until it securely engages each cam
9
screw.
right side
panel
fixed shelf
(back)
left side
panel
With the assistance of another adult, carefully
place left side panel onto a clean, padded surface
as shown. Fit dowels of assembled unit into
corresponding holes of right side panel as shown.
10
Secure all cams.
back
panel
A
B
VIEW FROM BELOW
A. With the assistance of another adult, carefully
position the assembled unit as shown. Fit cam
screws of back panel into corresponding holes of
Fit cam screws of right side panel into
corresponding holes of assembled unit as shown.
11 12
Secure all cams.
Made in Thailand - r05 Page 4 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
assembled unit as shown. Secure all cams.
B. Cover all exposed cams with cam covers as
shown.
sidecar HIGH DINING TABLE
NOTE: Make sure open
part of each bracket
is facing up as shown
With the assistance of another adult, carefully
position unit upright as shown. Attach 2 brackets
to left side panel of assembled unit with 2 small
screws per bracket as shown. Secure screws
with a screwdriver.
13
NOTE: Do not
over tighten the
bolts
top
crossbar
bottom
crossbar
leg frame
B
A. Fit bottom/top crossbars onto corresponding
brackets of assembled unit as shown. Secure
each bracket with 2 small bolts, using an allen
wrench. Do not over tighten the bolts.
B. At the point, fit bottom/top crossbars onto
corresponding brackets of leg frame as shown.
14
Secure each bracket with 2 small bolts.
A
top panel
leg/crossbar
assembly
storage
Attach top panel to assembled unit with 8 large
bolts for leg/crossbar assembly and 6 medium
bolts for storage assembly as shown. Secure all
15
bolts with an allen wrench.
assembly
16
Insert 6 levelers to bottom of assembled unit as
shown. Turn clockwise to secure/adjust. With the
assistance of another adult, carefully position unit
upright.
Assembly is now complete.
leveler
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. It is recommended to use coasters to protect
surface from heat and water. When moving the assembled table to a new location, it is recommended that the table is picked
up on both sides by 2 adults, carried and gently placed down at the new location. Never drag the table as this could cause
damage.
Made in Thailand - r05 Page 5 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...