Page 1
shake
NIGHTSTAND
hardware
Thank you for purchasing the Shake Nightstand. This
page lists all the contents included in the box. Please take
the time to identify the hardware as well as the individual
components to this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are recommended to safely assemble this product.
components
14 - wood
dowels
Missing hardware? Please call 800.606.6387 for replacements.
10 - bolts 8 - screws
tools required
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
1 - bottom panel
1 - top panel
1 - back panel
1 - drawer front
Made in Vietnam - r04 Page 1 of 4
2 - drawer sides
(1 left, 1 right)
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1 - drawer back
2 - side panels
(1 left, 1 right)
1 - drawer bottom
Page 2
shake
NIGHTSTAND
top panel
left and right
side panels
Insert 2 wood dowels into left and right side
1 2
panels as shown.
bottom
panel
Insert 6 wood dowels into top panel.
back
panel
right side
panel
left side
panel
With assistance of another adult, fit dowels of left
Insert 4 wood dowels into bottom panel.
3 4
Made in Vietnam - r04 Page 2 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
and right side panels into corresponding holes of
back panel as shown.
Page 3
shake
NIGHTSTAND
Note: Do not over
tighten the bolts
bottom
panel
top panel
With assistance, fit dowels of top panel into
corresponding holes of assembly and secure with 6
bolts. Secure, but do not over tighten, bolts with a
5 6
phillips head screwdriver.
left drawer
side
drawer front
Fit dowels of bottom panel into corresponding holes
of assembly and secure with 4 bolts.
drawer
bottom
Attach left drawer side to drawer front with 2
screws. Secure, but do not over tighten, screws
with a screwdriver.
7 8
Made in Vietnam - r04 Page 3 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Fit drawer bottom into corresponding grooves of
drawer assembly.
Page 4
shake
NIGHTSTAND
drawer
back
right drawer
side
Attach drawer back to left drawer side with 2
9 10
screws.
NOTE: Make sure glides are pulled
out of the case and ball bearings are
at the front of the extended glides.
To prevent damage to glides,
keep drawer assembly level
during installation.
Attach right drawer side to drawer assembly with
4 screws.
cleaning and care
Clean surfaces with a dry or damp soft
cloth. Do not use abrasive cleaners.
With assistance, position unit upright. Fit drawer glides of drawer into
corresponding drawer glides of case assembly. Make sure drawer
glides are securely engaged.
11
Made in Vietnam - r04 Page 4 of 4
Assembly is now complete.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...