CB2 Sandbar Assembly Instructions Manual

1

hardware

sandbar

COFFEE TABLE/BENCH

Thank you for purchasing the Sandbar Coffee
Table/Bench. This page

the box. Please take the time to identify the hardware as
well as the individual components
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.

Note: 2 people are required to safely assemble this product.

lists all the contents included in

to this product. As

components

4 – long
bolts

10 – wood
dowels

2 - small
washers

2 – short
bolts

4 - pads

Missing hardware?
Please call 800.606.6387

for replacements.

tools required

allen wrench (included)

rubber mallet

4 - large
washers

6 - spring
washers

2 – side
panels

1 - crossbar

1 – top
panel

Made in Vietnam - r01 Page 1 of 2

Customer Service 800.606.6252 | Latest instructions available on www.cb2.com

Carefully place top panel upside down on a
protected surface so that the screw holes are
facing upward. Insert and slightly tap 6 wood
dowels in the pre-drilled holes as ill

ustrated.

2 3 4

5

sandbar

COFFEE TABLE/BENCH

large holes on
crossbar should
face upwards

Insert 4 wood dowels into pre-drilled holes on
crossbar, and gently tap the wood dowels if
necessary. Attach side panels and crossbar by
aligning wood dowels and holes in side panel.
NOTE: 2 large holes on crossbar should face
upward.

With the assistance of another adult, align holes
in side panels with corresponding wood dowels
in top panel.

A

B

long bolts

A

B

short bolts

Paste the pads to the bottom of side panel.
With the assistance of another adult, carefully
turn the table/ bench to its upright position.
Assembly is now complete.

cleaning & care

A. Secure side panels with 4 long bolts, 4 spring
washers and 4 large flat washers as shown,

using an allen wrench.
B. Secure crossbar with 2 short bolts, 2 spring
washers and 2 small flat washers.

Made in Vietnam - r01 Page 2 of 2

Customer Service 800.606.6252 | Latest instructions available on www.cb2.com

Wipe up spots and spills immediately. Dust with soft
dry cloth. Do not use abrasive cleaners. Do not use
furniture wax or polish as the unit is finished with a
protective clear lacquer.