saga CREDENZA
assembly hardware
Thank you for purchasing the Saga Credenza. This
page
lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
to this product. As you unpack
components
20 - wood
dowels
8 - large
phillips bolts
12 - cam
screws
4 - allen
bolts
12 - cams
8 - small
phillips bolts
8 - flat
washers
6 - handle
screws
12 - spring
washers
mounting hardware
4 - small
screws
Missing hardware? Please call 800.606.6387 for replacements.
4 - large
screws
4 - plastic
anchors
2 - wall
straps
4 - mounting
brackets
tools required
phillips head screwdriver
allen wrench (included)
(We recommend the use of hand tools instead of power tools)
1 - top panel 1 - bottom panel 1 - back panel
2 - side panels
(1 right, 1 left)
Made in Vietnam - r08 Page 1 of 5
2 - partitions
(1 top, 1 bottom)
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1 - middle panel
2 - leg frames2 - crossbars
2 - door fronts
(1-A, 1-B)
1 - large
handle
1 - small
handle
saga CREDENZA
NOTE: Make sure arrow
on each cam points toward
nearest edge with holes
B
middle panel
A. Insert 4 wood dowels and 2 cams into 2 top
and bottom partitions as shown. Make sure
arrows on each cam points toward nearest edge
with holes.
B. Insert 4 wood dowels, 2 cam screws and 4
1
cams into middle panel as shown.
top and bottom
A
partitions
left and right
A
side panels
top panel
B
A. Insert 4 wood dowels, 2 cam screws and 2
cams into left and right side panels as shown.
2
B. Insert 6 cam screws into top panel as shown.
NOTE: Make sure cams of partition
are positioned as shown
middle panel
NOTE: Do not over
tighten the bolts
A. Fit dowels of top partition into corresponding
holes of middle panel as shown.
B. Attach top partition with 2 large bolts, 2 spring
washers and 2 flat washers as shown. Secure,
but do not over tighten, bolts with a phillips head
3
screwdriver.
NOTE: Make sure cam
screws of middle panel
are positioned as shown
top
partition
middle panel
bottom
partition
Fit dowels of bottom partition into corresponding
holes of middle panel as shown. Using a
screwdriver, turn each cam clockwise until it
4
securely engages each cam screw.
Made in Vietnam - r08 Page 2 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
saga CREDENZA
NOTE: Make sure cams of
side panels are positioned
left side
panel
as shown
middle
panel
NOTE: Make sure grooves
of left/right side panels are
assembled on the same side
as shown
Fit dowels of middle panel into corresponding
holes of left and right side panels as shown.
5
Secure all cams.
crossbar
right side
panel
leg assembly
bottom panel
With assistance of another adult, attach 2 leg
frames to bottom panel with 4 allen bolts and 4
spring washers as shown, using an allen
6
wrench.
bottom panel
assembly
NOTE: Make sure grooves
of bottom panel are assembled
towards the front as shown
With assistance of another adult, fit dowels of
assembled unit into corresponding holes of
Attach 2 crossbars to 2 leg frames with 8 small
7
phillips bolts as shown, using a screwdriver.
Made in Vietnam - r08 Page 3 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
bottom panel as shown. Secure with 6 large
phillips bolts, 6 spring washers and 6 flat
8
washers as shown.
saga CREDENZA
NOTE: Make sure the grooves
of top panel are facing the same
grooves of bottom panel during
assembly
top panel
back panel
With assistance of another adult, position unit
upright. Slide back panel into corresponding
9
grooves of left and right side panels as shown.
large handle
door front A
A
door front B
small
handle
B
A. Attach large handle to door front (A) with 3
handle screws as shown, using a screwdriver.
Do not over tighten the screws.
B. Attach small handle to door front (B) with 3
handle screws as shown.
Fit dowels of assembled unit into corresponding
holes of top panel as shown. Secure all cams in
10
side panels and top partition.
door front A
A
door front B
B
A. Fit top of door front (A) up into back groove of
top panel as shown. Fit bottom of door front (A)
into back groove of bottom panel as shown.
B. Fit top of door front (B) up into front groove of
top panel as shown. Fit bottom of door front (B)
into front groove of bottom panel as shown.
1211
Assembly is now complete.
Made in Vietnam - r08 Page 4 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
saga CREDENZA
WALL
optional wall mounting assembly
NOTE: If you are unsure about your wall type or what mounting
method you should use, consult a qualified professional or your
local hardware store.
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential to
use wall anchors appropriate to your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever possible.
A) Attach 2 mounting brackets to top of unit using 2 small screws
per bracket.
B) Determine the final location of unit. Mark position on the wall,
approximately 2" below the mounting bracket mounted to the back of
the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a
hole in the wall that is slightly smaller in diameter than the anchor.
Gently tap the plastic anchor until the flange of the anchor is flush
with the wall.
D) Attach 2 mounting brackets to the wall by inserting 2 large
screws through each mounting bracket and into the wall anchor in
the wall.
E) Place the unit so the mounting brackets on the back edge are
aligned with the wall brackets.
F) Lace one end of the wall strap through both brackets, and into the
other end of the strap.
G) Pull the strap tightly until secure.
Wall mounting assembly is now complete.
C
D
A
F
cleaning & care
Clean surfaces with a dry or damp soft
cloth. Do not use abrasive cleaners. Do
not use furniture wax or polish as the unit is
finished with a protective clear lacquer. It is
recommended to use coasters to protect
surface from heat and water.
weight limitations
This credenza is suitable to hold and not
exceed a 14-16 inch conventional TV and a
30-40 inch flat screen TV evenly distributed.
Made in Vietnam - r08 Page 5 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...