radius CHAISE
hardware
Thank you for purchasing the Radius Chaise This
page
lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
to this product. As you unpack
components
8 - small
bolt caps
Missing hardware?
Please call 800.606.6387 for replacements.
4 - large
bolt caps
tools required
allen wrench
(included)
NOTE: Do not over
tighten the bolt caps
12 - threaded
inserts
2 - leg frames
1 - mattress 1 - mattress
1 - frame
Made in China - r02 Page 1 of 4
2 - crossbars
crossbar
cover
Attach crossbars to each leg frame with 4
threaded inserts and 4 small bolt caps as
shown. Secure, but do not over tighten, the bolt
1
caps using an allen wrench.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
leg frame
radius CHAISE
A. Place mattress cover upside
down as shown onto a clean,
padded surface. Unzip and open
small cover as shown.
B. Unzip and open large and inside
cover as shown.
A
CLOSE
B
mattress cover
small cover
large cover
OPEN
CLOSE
2
A. With the assistance of another
adult, fit mattress into mattress
cover as shown.
B. Flip inside cover over mattress
as shown.
inside cover
large cover
inside cover
inside cover
OPEN
mattress
A
B
mattress cover
3
Made in China - r02 Page 2 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
radius CHAISE
With the assistance of another
adult, carefully place frame, with
slates facing down, into matress
cover as shown.
frame
matress cover
4
A. Zip up large cover as shown.
B. Wrap tabs of large cover around
bar of frame as shown. Secure by
firmly pressing down on tabs.
C. Zip up small cover as shown.
small cover
B
tab
bar
large cover
A
B
C
matress cover
5
Made in China - r02 Page 3 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
radius CHAISE
With the assistance of another
adult, carefully place leg frame
assembly onto mattress assembly
as shown. Secure with 4 threaded
inserts and 4 large bolt caps using
an allen wrench.
mattress assembly
leg assembly
6
seat back
With the assistance of another adult, position
assembled unit upright. Adjust seat back of chaise
up and down to desired position.
CLEANING AND CARE
Clean surfaces with a dry or damp cloth. Do not
use abrasive cleaners. Wipe up spots and spilled
immediately. Keep out of direct sunlight to prevent
the cover from fading.
FABRICS ARE TEFLON TREATED TO RESIST
LIGHT STAINS ONLY. FOR HEAVIER STAINS,
PROFESSIONALLY DRY CLEAN.
Assembly is now complete.
7
Made in China - r02 Page 4 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...