platform COFFEE TABLE
hardware
Thank you for purchasing the Platform Coffee Table.
This page
Please take the time to identify the hardware as well as
the individual components
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
lists all the contents included in the box.
to this product. As you
components
4 - large
bolts
12 - wood
dowels
Missing hardware?
Please call 800.606.6387 for replacements.
12 - small
bolts
16 - flat
washers
16 - screws 12 - cam
16 - spring
washers
tools required
phillips head screwdriver
( We recommend the use of hand tools instead of power tools )
screws
12 - cams
1 - top panel
2 - side panels
(1 left, 1 right)
4 - drawer sides
(2 left, 2 right)
Made in Vietnam - r04 Page 1 of 4
1 - partition 2 - drawer backs
2 - drawer bottoms 4 - legs
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1 - bottom panel 1 - back panel
2 - drawer fronts
(1 left, 1 right)
4 - brackets
platform COFFEE TABLE
NOTE: Do not over
tighten cam screws
top panel
bottom
panel
left side panel
NOTE: Make sure arrows
points toward nearest
edge with holes
partition
right side panel
Insert 6 wood dowels and 6 cam screws into
top panel and bottom panel as shown. Secure,
but do not over tighten, each cam screw with a
1 2
phillips head screwdriver.
NOTE: Do not over
tighten the bolts
B
A
large
bolt
small
bolt
A
bottom
panel
B
leg
A) With the assistance of another adult, attach 4
legs to bottom panel as shown. Insert 1 small
bolt, 1 flat washer and 1 spring washer
through top panel into each leg. Secure, but do
not over tighten, the bolts with a screwdriver.
B) Secure each leg to corner brackets with 1
large bolt, 1 flat washer and 1 spring washer
3
as shown.
4
Insert 4 cams into left/right side panel and
partition as shown. Make sure arrows on each
cam points toward nearest edge with holes.
bracket
Attach 4 brackets to assembled unit as shown.
Secure each bracket with 2 small bolts, 2 flat
washers and 2 spring washers as shown.
Made in Vietnam - r04 Page 2 of 4
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
platform COFFEE TABLE
left side
panel
partition
right side
panel
With the assistance of another adult, position unit
upright. Fit dowels of assembled unit into
corresponding holes of left/right side panels
and partition. With a screwdriver, turn each cam
clockwise until it securely engages each cam
5
screw.
back panel
Fit back panel into corresponding grooves of
assembled unit as shown.
6
NOTE: Make sure open end
of glides are positioned toward
back panel and grooves in all
panels are aligned
top panel
drawer front
drawer left
NOTE: Do not over
tighten the screws
Fit dowels of drawer front into corresponding
With the assistance of another adult, fit dowels
of top panel into corresponding holes of
7
assembled unit. Secure all cams.
Made in Vietnam - r04 Page 3 of 4
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
holes of drawer left and attach with 2 screws as
shown. Secure, but do not over tighten, screws
with a screwdriver.
8
platform COFFEE TABLE
drawer bottom
Slide drawer bottom into corresponding
grooves of drawer assembly.
9 10
NOTE: To remove drawers, fully extend the
drawer and push the lever on the right
drawer glide down and pull the lever
on the left drawer glide up while
pulling out the drawer.
drawer back
Fit dowels of drawer back into corresponding
holes of drawer assembly and attach with 2
screws as shown.
left drawer
glide
right drawer
glide
drawer right
Fit glides of drawer assembly into drawer glides
Fit dowels of drawer assembly into
corresponding holes of drawer right and attach
with 4 screws as shown. Repeat steps 8-11 for
remaining drawer assembly.
11
of unit. Push drawer assembly into the glides
until the drawer is all the way in. Test the drawer
by opening and closing a couple of times to
ensure it is secure.
12
Assembly is now complete.
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is recommended to use coasters to protect surface from heat
and water.
Made in Vietnam - r04 Page 4 of 4
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
Loading...