CB2 Dockside, Plank Assembly Instructions Manual
dockside
DINING TABLE
hardware
Thank you for purchasing the Dockside Dining Table.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well as
the individual components to this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are recommended to safely assemble this
product.
components
8 - flat
washers
8 - bolts
Missing hardware?
Please call 800.606.6387 for replacements.
8 - spring
washers
tools required
hex wrench
(included)
2 - legs
2 - legs
Made in Vietnam - r05 Page 1 of 2
A1B1A2
B2
1 - tabletop
With the assistance of another adult, place tabletop
upside down on a clean, padded surface. Attach
leg “A1” to the tabletop corner bracket with 2 bolts,
2 spring washers and 2 flat washers. Secure
1
each bolt with the hex wrench.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
leg
A1
dockside
leg
B1
leg
DINING TABLE
A2
leg
B2
Repeat Step 1 for remaining 3 legs, positioning legs
as shown.
2 3
With assistance, place table upright. Assembly is
now complete.
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Periodically, tighten bolts as necessary.
Left unprotected, this table will weather and patina to a silvery grey.
During normal weathering, wood may crack slightly due to changes in the moisture; this does not effect the structural integrity
of the furniture.
Store or keep covered during inclement weather and when not in use.
To preserve the original finish avoid leaving in direct sunlight for extended periods of time.
Made in Vietnam - r05 Page 2 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...