Page 1
phoos TABLE
hardware
#10 #11
#15 #16
Thank you for purchasing the Phoos Table. This page
lists all the contents included in the box. Please take the
time to identify the hardware as well as the individual
components
to this product. As you unpack and
prepare for assembly, place the contents on a carpeted
or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
components
#5
16 - bumpers
12 - large
allen bolts
#21
4 - leg
levelers
16 - plastic
washers
#18 #19#17 #20
8 - small
phillip bolts
Missing hardware?
Please call 800.606.6387 for replacements.
8 - small
allen bolts
8 - medium
phillip bolts
20 - metal
washers
26 - large
phillip bolts
tools required
allen wrench (included)
(We recommend the use of hand tools instead of power tools)
assembly
philips head screwdriver
NOTE: Do not over
tighten the bolts.
#1
1 - table assembly
#2
#3
4 - legs
#12
8 - rod
end caps
#13
8 - rod handles
4 - 3 man rods
#6
2 - 2 man rods
#7
2 - 5 man rods
leg B
#8
13 - A players
#2
leg end
panel
#3
#4
#16
#15
leg C
Attach 1 leg B and 1 leg C with 1 leg end panel.
#4
#14
#9
Secure each leg to leg end panel with 2 metal
washers and 2 small allen bolts as shown.
Secure, but do not over tighten, bolts using an
2 - leg end
panels
Made in China - r04 Page 1 of 3
2 - soccer balls
Customer Service 800.606.6252 I Latest instructions available at www.cb2.com
13 - B players
allen wrench. Repeat steps for remaining leg
1
end panel and legs.
Page 2
phoos
A
#16
TABLE
#17
leg
assembly
NOTE: Make sure
leg assemblies are
positioned as shown
B
leg leveler
#21
#1
leg
assembly
A
#16
table
assembly
#17
A. With the assistance of another adult, place table assembly upside down onto a clean, padded surface.
Attach 2 leg assemblies to table assembly with 6 metal washers and 6 large allen bolts per leg assembly
as shown. Secure using an allen wrench.
B. Attach 4 leg levelers to each leg as shown. Turn each leg leveler clockwise to secure.
C. With the assistance of another adult, position unit upright. If table is not level, adjust each leveler by
2
Made in China - r04 Page 2 of 3
turning clockwise or counter clockwise.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 3
phoos
#7
#5
A player
3-man rod
A player
5-man rod
TABLE
A player
2-man rod
#5
B player
3-man rod
#6
#5
A player
3-man rod
#6
B player
2-man rod
B
medium
phillips
bolt
#19
#13
rod
handle
#7
B player
5-man rod
A
A
large
phillips
bolt
#20
IMPORTANT NOTE: Make sure to install
all rod handles for all A players on one side
of the table and all rod handles for all B players
on the other side of the table as shown.
#5
B player
3-man rod
#7
5-man rod
bumper
plastic washer
#10
#11
A player
#8
plastic washer
bumper
#10
A
A
small
phillips
bolt
#18
B
#11
rod
end cap
#12
A. Slide 1 bumper, 1 plastic washer, 5 A players, 1 plastic washer and 1 bumper onto 1 5-man rod as
shown. Secure each A player with 1 large phillips bolt using a phillips head screwdriver. Do not over tighten
bolts.
B. Attach 1 rod end cap and 1 rod handle to 5-man rod as shown. Secure rod end cap with 1 small phillips
bolt and rod handle with 1 medium phillips bolt. Repeat steps A & B for remaining rods for A and B players.
Assembly is now complete.
IMPORTANT NOTE: Make sure to install all rod handles for all A players on one side of the table and all
3
rod handles for all B players on the other side of the table as shown.
cleaning & care
Made in China - r04 Page 3 of 3
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Loading...