CB2 Petite Assembly Instructions Manual

petite CHAIR

hardware

Thank you for purchasing the Petite Chair. This page
lists all the contents included in the box. Please take
the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from
damage.

Note: 2 people are required to safely assemble this product.

to this product. As you unpack

components

4 - bolts 4 - large

mounting
bolts

4 - plastic
washers

Missing hardware?
Please call 800.606.6387 for replacements.

2 - small
spacers

tools required

2- allen wrench (included)

NOTE: Do not fully
tighten the bolts

top leg
frame

1 - small
mounting
bolt

2 - large
spacers

2 - side

1 - seat

2 - leg frames
(1 top, 1 bottom)

Made in Italy - r03 Page 1 of 2Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

supports

1

Fit notch of top leg frame into corresponding
notch of bottom leg frame as shown. Loosely
attach leg frames with 1 small mounting bolt.

bottom leg
frame

petite CHAIR

NOTE: Do not over
tighten the bolts

large
spacer

A

small
spacer

side
support

Loosely attach 2 side supports to leg assembly
with 2 bolts per support.

2 3

cleaning & care

Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protect clear lacquer.

B

A. Insert 2 large spacers into front of leg assembly
and 2 small spacers into back of leg assembly as
shown.
B. Loosely attach seat to leg assembly with 4
large mounting bolts and 4 plastic washers. At
this point, fully tighten all bolts with an allen
wrench. Do not over tighten the bolts.
Assembly is now complete.

Made in Italy - r03 Page 2 of 2

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com