monolith CABINET
NOTE: Cabinet door can be installed
to open from either sides. Please refer
to the left/right hinged instructions.
Thank you for purchasing the Monolith Cabinet. This
page
lists all the contents included in the box. Please take
the time to identify the hardware as well as the individual
components
for assembly, place the contents on a carpeted or
padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
to this product. As you unpack and prepare
assembly hardware
10 - cams
4 - bolts 8 - shelf
10 - cam
screws
16 - wood
dowels
18 - hinge
screws
pins
4 - flat
washers
4 - cam
covers
mounting hardware
4 - large
screws
Missing hardware?
Please call 800.606.6387 for replacements.
4 - small
screws
4 - wall
brackets
2 - wall
straps
tools required
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
4 - spring
washers
3 - hinges
4 - plastic
anchors
components
1 - top panel
2 - side panels
(1 left, 1 right)
1 - base 1 - fixed shelf 2 - adjustable
shelves
1 - back panel 1 - door
Made in Vietnam - r06 Page 1 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
monolith CABINET
A
fixed shelf
NOTE:Make sure arrows
of each cam points towards
nearest edge with holes
B
base
NOTE:Do not over
tighten the cam screws
top panel
A. Insert 4 cams into fixed shelf as shown.
Make sure arrows of each cam points towards
nearest edge with holes.
B. Insert 2 cams into base as shown.
1
left and right
side panels
Insert 6 wood dowels, 3 cam screws and 2
cams into right and left side panels as shown.
Insert 4 cam screws into top panel as shown.
Using a phillips head screwdriver, secure but
do not over tighten the cam screws.
2
fixed
shelf
base
A
NOTE:Do not over
tighten the bolts
B
right side
panel
A. Fit fixed shelf onto dowels and cam screws
of right side panel as shown. Using a screwdriver, turn each cam clockwise until it securely
engages the cam screw.
B. Fit base onto dowels and cam screws of
right side panel. Attach base with 2 bolts, 2
spring washers and 2 flat washers, using a
screwdriver. Do not over tighten the bolts.
43
Secure cam.
B
MadeinVietnam -r06 Page2of6
CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com
monolith CABINET
back panel
Slide back panel into corresponding grooves of
base and right side panel.
5
left side
panel
A
B
B
A. Fit dowels and cam screws of left side panel
into corresponding holes of assembly as shown.
Secure cams.
B. Secure base with 2 bolts, 2 spring washers
and 2 flat washers, using a screwdriver. Secure
6
cams.
top panel
A
A
B
B
A. With the assistance of another adult, position
unit upright. Insert 4 wood dowels into left and
right side panels. Fit cam screws of top panel
into right and left side panels, and secure
cams.
B. Cover exposed cams with cam covers.
A
adjustable
B
shelf
A. Insert 8 shelf supports at desired shelf
heights.
B. Place 2 adjustable shelves into assembly as
shown. Make sure shelves are securely
87
supported by shelf supports.
MadeinVietnam -r06 Page 3of6
CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com
monolith CABINET
NOTE: Do not over
tighten the screws
door
This door can be installed to open from either sides:
The following instructions are for
left-hinged
door
Refer to Hinge Adjustment
diagram for adjusting the
alignment of the door hinges.
LEFT-HINGED DOOR.
Attach 3 hinges to door with 2 hinge screws
per hinge as shown, using a screwdriver. Do
not over tighten the screws.
9
This door can be installed to open from either sides:
The following instructions are for
RIGHT-HINGED DOOR.
right-hinged
door
Refer to Hinge Adjustment
diagram for adjusting the
alignment of the door hinges.
Attach hinges of door to left side panel with 4
hinge screws per hinge.
Assembly is now complete.
10
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners. Do not use furniture wax
or polish as the unit is finished with a protective
clear lacquer.
Attach hinges of door to right side panel with 4
hinge screws per hinge.
11
MadeinVietnam -r06 Page4of6
Assembly is now complete.
CustomerService800.606.6252|Latestinstructionsavailableatwww.cb2.com
monolith CABINET
hinge adjustment
If the doors do not appear square or aligned,loosen or tighten the appropriate screws on each case hinge as illustrated.
1 2
A
B
Side to side adjustment:
Loosen screw A, adjust gap with
screw B and re-tighten screw A
Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise
A
B
3
C
C
Height adjustment:
Loosen screw C, adjust door
height and re-tighten screw C
Made in Vietnam - r06 Page 5 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
monolith CABINET
wall mounting assembly
mounting
A
small
screw
bracket
plastic
C
anchor
mounting
bracket
large
screw
wall
strap
D
WALL
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware store.
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe
mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete,
etc.). Mount to wood studs whenever possible.
A) Attach 2 mounting brackets to top of unit using 2 small screws per bracket.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below each mounting
brackets mounted to the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly smaller
in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the
wall.
D) Attach the mounting brackets to the wall by inserting 2 large screws through each mounting
bracket and into the wall anchor in the wall.
E) Position the unit so the mounting bracket on the back edge is allowed with the wall bracket.
F) Lace one end of each wall strap through corresponding brackets, and into the other end of the strap.
G) Pull the straps tightly until secure.
Wall mounting assembly is now complete.
Made in Vietnam - r06 Page 6 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...