kickstand BOOKSHELF
hardware
Thank you for purchasing the Kickstand Bookshelf.
This page
Please take the time to identify the hardware as well as
the individual components
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
lists all the contents included in the box.
to this product. As you
components
12 - wood
dowels
2 - large
bolts
6 - large
screws
2 - pads
2 - small
cams
Missing hardware?
Please call 800.606.6387 for replacements.
4 - large
cams
4 - small
screws
6 - cam
screws
6 - medium
screws
40 - small
bolts
6 - plastic
anchors
tools required
allen wrench (included)
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
2 - frames
(1 left, 1 right)
1 - drawer front
Made in Taiwan - r05 Page 1 of 7
10 - shelf supports
(5 left, 5 right)
1 - top panel 1 - back panel
2 - drawer sides
(1 left, 1 right)
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
4 - shelves 2 - side panels
(1 left, 1 right)
1 - bottom panel
1 - drawer back 1 - drawer bottom
kickstand BOOKSHELF
NOTE: Do not over tighten the bolts
left shelf
support
1
left side frame
Attach 5 left shelf supports to left side frame with 2 small bolts per support as shown. Secure, but
do not over tighten with an allen wrench.
right shelf
support
small
bolt
right side frame
small
bolt
2
Made in Taiwan - r05 Page 2 of 7
Attach 5 right shelf supports to right side frame with 2 small bolts per support as shown.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
kickstand BOOKSHELF
NOTE: Do not over tighten the cam screws
top panel
Insert 4 cam screws into top panel as shown.
Secure, but do not over tighten, with a phillips
head screwdriver.
3
NOTE: Make sure arrows
on each cam point towards
nearest edge with holes
left and right side
panels
Insert 2 large cams and 2 wood dowels into
right and left side panels as shown. Make sure
arrows on each cam point towards nearest edge
4
with holes.
left side panel
top panel
Fit dowel of left and right side panels into top
panel. Using a screwdriver, turn each cam
clockwise until it securely engages each cam
5 6
screw.
NOTE: Make sure grooves
of side panels and top panel
are assembled on the same
side
right side panel
B
bottom panel
A
back panel
A. Insert back panel into grooves of assembly.
B. Attach bottom panel to assembly with 4
large screws, using a screwdriver.
Made in Taiwan - r05 Page 3 of 7
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
kickstand BOOKSHELF
A
small
bolt
B
7
A
A. With assistance of another adult, position case assembly into corresponding shelf supports and attach
bottom panel to shelf supports with 4 small bolts. Do not fully tighten the bolts.
B. Secure back panel to each frame with 1 large bolts.
case assembly
A
B
large
bolt
NOTE: Make sure labeled
arrows are pointing towards
front and facing the bottom
during assembly
A
small
bolt
shelf
shelf
shelf
shelf
B
A. Position 4 shelves onto corresponding shelf supports.
Secure each shelf with 4 small bolts as shown. At this
point, fully tighten all bolts with an allen wrench.
8
Made in Taiwan - r05 Page 4 of 7
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
B. Adhere 2 pads to bottom of frame assembly as shown.
kickstand BOOKSHELF
B
left drawer
side
NOTE: Do not over tighten the screws
drawer back
C
A. Insert 1 small cam into left and right drawer sides as
shown. Make sure arrows on each cam point towards the
nearest edge with holes.
9
B. Insert 4 wood dowels into drawer back as shown.
right drawer
side
C. Fit dowels of drawer back into left and right
drawer sides as shown. Attach each side with
2 large screws. Secure, but do not over
tighten, with a phillips head screwdriver.
A
Insert drawer bottom into grooves of assembly
10 11
Made in Taiwan - r05 Page 5 of 7
as shown.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Insert 2 cam screws and 4 wood dowels into
drawer front as shown, using a screwdriver.
kickstand BOOKSHELF
WALL
12
Fit dowels of drawer front into drawer sides as
shown. Using a screwdriver, turn each cam
clockwise until it securely engages each cam
screw.
WALL WALL
A B
13
With the assistance of another adult, carefully
position frame assembly upright and determine
the final location of unit.
B. Drill a hole in the wall stud. If the wall stud is not
A. Locate bracket tabs on left and side frames.
Mark each position on the wall. With the
14
Made in Taiwan - r05 Page 6 of 7
assistance of another adult, set assembly aside.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
available, drill a hole in the wall that is slightly smaller in
diameter than the anchor. Gently tap the plastic anchor
until the flange of the anchor is flush with the wall.
kickstand BOOKSHELF
medium
screw
Place the unit so the tabs of frame assembly are
aligned with the plastic anchors. Insert 1 medium
15
screw through each tab and plastic anchor with a
screwdriver.
16
DETAIL VIEW
FROM BELOW
drawer
assembly
Extend drawer glides from case assembly as
shown. Align holes on underside of drawer
assembly with holes in the drawers glides. Using
a screwdriver, secure glides to drawer with 4
small screws.
Assembly is now complete.
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer.
Made in Taiwan - r05 Page 7 of 7
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...