Page 1
ipanema
TABLE
Thank you for purchasing the Ipanema Table. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
NOTE: 2 people are required to safely assemble this product.
4 - small
bolts
4 - washers
Missing hardware?
Please call 800.606.6387 for replacements.
1 - allen wrenches (included)
1 - hex wrench ( included)
8 - large
bolts
12 - bolt cover 8 - hex
leg
8 - hex
nuts
covers
1 - tabletop
1 - support ring
tabletop
4 - legs
Made in China - r05 Page 1 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Place tabletop upside down onto a clean, padded
surface. Loosely attach 4 legs to tabletop with 1
1
small bolt and 1 washer per leg as shown.
Page 2
ipanema
hex
cover
C C
TABLE
bolt
cover
A) With the assistance of another adult, fit support ring
into corresponding brackets of legs. Loosely secure
support ring to each leg with 2 large bolts and 2 hex
nuts as shown. Fully tighten large bolt by turning allen
wrench clockwise while holding hex nut with hex wrench.
Do not over tighten the bolts.
B) Fully tighten small bolts with an allen wrench.
C) Insert 12 bolt covers onto exposed bolts and 8 hex
covers onto exposed hex nuts as shown. Press firmly to
secure. Position unit upright.
Assembly is now complete.
2
B
support ring
A
A
NOTE: Do not over tighten the bolts
CLEANING & CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. It is recommended to cover the table in
inclement weather.
hex nut
large
bolt
Made in China - r05 Page 2 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...