hyde SQUARE WALL CABINET
assembly hardware
Thank you for purchasing the Hyde Square Wall
Cabinet. This page
box. Please take the time to identify the hardware as
well as the individual components
you unpack and prepare for assembly, place the
contents on a carpeted or padded area to protect them
from damage.
Note: 2 people are recommended to safely assemble this
product.
lists all the contents included in the
to this product. As
components
16 - wood
dowels
8 - cam
screws
12 - small
screws
8 - cams
5 - hinge
screws
2 - door
hinges
wall mounting hardware
3 - large
screws
Missing hardware?
Please call 800.606.6387 for replacements.
1 - wall template
3 - plastic
anchors
tools required
phillips head screwdriver
hammer
level
1 - top panel 1 - bottom
1 - back panel 1 - door
1 - right side
panel
Made in Vietnam - r04 Page 1 of 5
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
panel
panel
1 - wall
bracket
1 - frame
1 - left side
panel
1 - arm
hinge
hyde SQUARE WALL CABINET
A
B
NOTE: Make sure
grooves of side panels
are facing towards
each other
Attach 2 door hinges to door panel with 2 small
screws per hinge as shown.
C
A
B
A. Insert 2 wood dowels into right side panel and
fit into corresponding holes of frame as shown.
B. Insert 2 wood dowels into left side panel and fit
into corresponding holes of frame.
21
A) Insert 6 wood dowels and 4 cam screws into
top panel as shown. Secure cam screws with a
screwdriver.
B) Insert 2 cams into each side panel as shown.
Make sure arrows on each cam point toward
nearest edge with holes.
C) Fit dowels of top panel into corresponding
holes of assembly. Using a screwdriver, turn each
cam clockwise until it securely engages each cam
screw.
NOTE: Make sure
arrows on each cam
point toward nearest
edge with holes
3
Made in Vietnam - r04 Page 2 of 5
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
hyde SQUARE WALL CABINET
A
B
C
Fit back panel into corresponding grooves of
assembly as shown.
Refer to Hinge Adjustment
diagram for adjusting the
alignment of the door hinges.
A. Insert 6 wood dowels and 4 cam screws into
bottom panel as shown.
B. Insert 2 cams into each side panel as shown.
C. Fit dowels of bottom panel into corresponding
54
holes of assembly. Secure all cams.
NOTE: Do not over tighten
the screws
Fit door hinges of door panel into corresponding
hinge plate of assembly as shown. Secure each
hinge with 4 small screws as shown, using a
screwdriver. Do not over tighten the bolts.
Made in Vietnam - r04 Page 3 of 5
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
Position assembly on left side as shown. Attach
arm hinge to right side panel with 3 hinge screws
as shown. Secure, but do not over tighten, screws
76
with a screwdriver.
hyde SQUARE WALL CABINET
CLEANING AND CARE
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer.
Secure arm hinge to door panel with 2 hinge
screws as shown. Assembly is now complete.
8
hinge adjustment
If the doors do not appear square or aligned,loosen or tighten the appropriate screws on each case hinge as illustrated.
1
A
B
Side to side adjustment:
Loosen screw A, adjust gap with
screw B and re-tighten screw A
2
A
B
Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise
3
C
C
Height adjustment:
Loosen screw C, adjust door
height and re-tighten screw C
Made in Vietnam - r04
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
Page 4 of 5
hyde SQUARE WALL CABINET
wall attachment assembly
WALL
wall template
wall attachment
bracket
wall attachment
bracket pre-installed
on wall console
NOTE: Make sure arm hinge is orientated on
top and door opens to the left during wall
attachment assembly
VERTICAL DOOR
ORIENTATION
BACK OF
ASSEMBLY
wall template
wall attachment
bracket
BACK OF
ASSEMBLY
HORIZONTAL DOOR
ORIENTATION
wall attachment
bracket pre-installed
on wall console
WALL
NOTE: Make sure arm hinge is
orientated on the right and door
opens upward during wall
attachment assembly
The wall mounting hardware included with this wall console is intended for drywall
installation only. Be sure to use hardware appropriate for your wall type. Whenever
possible, fasten screws directly into a wall stud. If you are unsure about your wall type or
what mounting method you should use, consult a qualified professional or your local
hardware store.
1. Determine the wall console orientation (vertical or horizontal door) and wall
location. Using a level for the provided wall template, level and mark hole positions for
wall bracket as shown. Discard wall template.
wall bracket
2. If attaching directly into wall studs, skip to Step 4.
3. For drywall installation, drill a hole slightly smaller in diameter than the anchor. Insert 1
plastic anchor at each marked hole location and gently tap with a hammer until the head
of each anchor is flush to the wall surface.
4. Insert 1 large screw through each hole in the wall bracket and into the corresponding
anchors or studs in the wall. Fully tighten each screw with a phillips head screwdriver
but do not over tighten.
5. With the assistance of another adult, fit the bracket on the back of the unit onto the wall
bracket. Make sure the unit is firmly seated in the wall bracket.
Wall attachment is now complete.
Made in Vietnam - r04 Page 5 of 5
Customer Service 800.606.6252 | Latest instructions available on www.cb2.com
Loading...