Page 1
heyday LOW DRESSER
hardware
Thank you for purchasing the Heyday Low Dresser.
This page
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
Note: 2 people are required to safely assemble this product.
lists all the contents included in the box. Please
to this product. As you unpack
components - box 1
12 - wood
dowels
32 - medium
screws
Missing hardware?
Please call 800.606.6387 for replacements.
6 - cam
screws
15 - large
screws
6 - cams 12 - leg
6 - cam
covers
16 - small
screws
tools required
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
components - box 2
screws
1 - back
4 - drawer
fronts
4 - left drawer
sides
4 - drawer
bottoms
Made in China - r11 Page 1 of 4
4 - right drawer
sides
4 - drawer
backs
4 - legs
(2 left, 2 right)
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
2 - side panels
(1 left, 1 right)
1 - partition
(glides on both
sides)
1 - support
leg
panel
1 - top
panel
1 - bottom
panel
Page 2
heyday LOW DRESSER
NOTE: Make sure arrows
on each cam points toward
nearest edge with holes
left and right
side panels
NOTE: Do not
over tighten
the cam screws
A
B
partition
A. Insert 2 cams and 4 wood dowels into left and
right side panel as shown. Make sure arrows on
each cam points toward nearest edge with holes.
B. Insert 2 cams and 4 wood dowels into
1 2
partition.
NOTE: Make sure glides
pull out away from grooves
of top panel and cams are
right side
panel
partition
oriented as shown
right side
panel
left side
panel
top
panel
Insert 6 cam screws into top panel as shown.
Secure, but do not over tighten, screws with a
phillips head screwdriver.
NOTE: Do not
over tighten the screws
back
panel
left side
panel
top
panel
With assistance of another adult, fit dowels of
partition and left/right side panels into
corresponding holes of top panel as shown. Make
sure glides pull out away from the grooves on top
panel and cams are oriented as shown. Secure all
3
cams.
Made in China - r11 Page 2 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Attach back panel to assembled unit with 3 large
screws per side panel as shown. Secure, but do
4
not over tighten the screws with a screwdriver.
Page 3
heyday LOW DRESSER
A
left side
legs
B
support
leg
bottom
panel
A. Attach 4 left/right legs to bottom panel with 3
leg screws per leg as shown. Secure screws with
a screwdriver.
B. Attach support leg to bottom panel. Turn
support clockwise to secure.
5
right side
legs
A
A
bottom
assembly
NOTE: Do not
B
A. With the assistance of another adult, fit dowels
and back panel of assembled unit into corresponding
groove of bottom assembly as shown. At this point,
secure bottom assembly with 9 large screws as
shown, using a screwdriver.
B. At this point, cover all exposed cams with cam
6
covers.
over tighten
the screws
B
SIDE VIEW
drawer
left side
drawer front
drawer front
assembly
NOTE: Make sure the angled
side is towards the drawer front
assembly, and grooves on sides
and drawer front are aligned.
Attach drawer left side to drawer front assembly
with 2 medium screws and secure using a
screwdriver as shown. Make sure the angled side
is towards the drawer front assembly, and
7
grooves on sides and drawer front are aligned.
drawer
left side
drawer
bottom
Slide drawer bottom into grooves of drawer
8
assembly as shown.
Made in China - r11 Page 3 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 4
heyday LOW DRESSER
drawer
back
drawer
right
side
Attach drawer back with 2 medium screws as
9 10
shown.
B
A
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
11
drawer
assembly
A. Fully extend drawer glides from assembled unit.
B. Position and rest the drawer assembly on top of
tabs of drawer glides as shown. Secure each glide
to drawer with 2 small screws as shown, using a
screwdriver.
Repeat step 11 for remaining drawer assemblies.
Assembly is now complete.
B
Attach drawer right side to the drawer assembly
with 4 medium screws as shown.
Repeat steps 7-10 for remaining drawer
assemblies.
Made in China - r11 Page 4 of 4
Customer Service 800.606.6252 I Latest instructions available at www.cb2.com
Loading...