Page 1
chill MEDIA CONSOLE
hardware
Thank you for purchasing the Chill Media Console. This
page
lists all the contents included in the box. Please
take the time to identify the hardware as well as the
individual components
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from damage.
NOTE: 2 people are required to safely assemble this product.
to this product. As you unpack
components
18 - cam
screws
9 - flat
washers
30 - wood
dowels
9 - spring
washers
18 - cams
8 - cam
covers
16 - screws
Missing hardware?
Please call 800.606.6387
for replacements.
mounting hardware
4 - small
screws
4 - large
screws
2 - wall
straps
4 - mounting
brackets
tools required
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
9 - bolts
4 - plastic
anchors
1 - top
panel
2 - side panels
(1 left, 1 right)
2 - drawer
backs
Made in Vietnam - r09 Page 1 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1 - large
back panel
2 - drawer
fronts
(1 left, 1 right)
1 - middle
panel
1 - small
back panel
2 - drawer
bottoms
1 - bottom
panel
2 - top partitions
1 - bottom partition
4 - drawer
sides
(2 left, 2 right)
Page 2
chill MEDIA CONSOLE
NOTE: Do not over
tighten the cam
screws
middle
A
panel
B
A. Insert 2 cam screws, 2 wood dowels and 4
cams into middle panel as shown. Secure, but do
not over tighten, cam screws with a phillips head
screwdriver. Make sure arrows on each cam point
toward nearest edge with holes.
B. Insert 4 cam screws, 6 wood dowels and 2
1
cams into left and right side panels as shown.
NOTE: Make sure arrows
on each cam point toward
nearest edge with holes
left and right
side panels
top partition
bottom
partition
A. Insert 2 wood dowels and 2 cams into top
partitions as shown.
B. Insert 2 dowels and 2 cams into bottom
2
partition as shown.
A
top panel
bottom
B
panel
A. Insert 8 wood dowels and 8 cam screws into
top panel as shown.
3
B. Insert 4 cams into bottom panel as shown.
NOTE: Do not over
tighten the bolts
middle panel
top partition
top partition
Fit dowels of top partitions into corresponding
holes of middle panel as shown. Secure middle
panel with 4 bolts, 4 spring washers, and 4 flat
washers, using a phillips head screwdriver. Do
4
not over tighten the bolts.
Made in Vietnam - r09 Page 2 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 3
chill MEDIA CONSOLE
NOTE: Make sure glides
of bottom partition are
positioned as shown
bottom
partition
middle panel
Fit dowels of middle panel into corresponding
holes of bottom partition as shown. Secure
bottom partition by turning 2 cams clockwise
with a screwdriver, until each cam securely
5
engages each cam screw.
large back
panel
Fit large back panel into corresponding groove of
assembled unit as shown.
6
bottom
panel
A
small back
panel
A. Insert 2 wood dowels into bottom panel as
shown.
B. Fit dowels of bottom panel into corresponding
holes of small back panel as shown. Secure small
back panel with 3 bolts, 3 spring washers, and 3
7
flat washers, using a screwdriver.
Made in Vietnam - r09 Page 3 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
B
With the assistance of another adult, fit dowels of
bottom partition into corresponding holes of
bottom panel and large back panel into
corresponding groove of bottom panel as shown.
Secure bottom panel with 2 bolts, 2 spring
8
washers, and 2 flat washers, using a screwdriver.
bottom
panel
Page 4
chill MEDIA CONSOLE
B
right side
panel
Fit dowels of left and right side panels into
corresponding holes of assembled unit. Secure all
9
cams.
NOTE: Do not over
tighten the screws
bottom
panel
left side
panel
top panel
A
A. With the assistance of another adult, carefully
position assembled unit upright. Fit dowels of top
panel into corresponding holes of assembled unit.
Secure all cams.
B. At this point, cover all exposed cams with cam
10
covers.
drawer
front
drawer
left side
Attach drawer left side to drawer front with 2
screws as shown. Secure screws with a
11
screwdriver.
Made in Vietnam - r09 Page 4 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Slide drawer bottom into grooves of drawer
assembly as shown.
12
drawer
bottom
Page 5
chill MEDIA CONSOLE
drawer
back
drawer
right side
Fit groove in drawer back onto drawer bottom
and dowels of drawer back into drawer side
panel. Attach drawer back to drawer assembly
with 2 screws as shown.
13
NOTE: Make sure to
keep drawer level so
as not to damage glides
during assembly
NOTE:
Make sure glides are
pulled out of the case, and
ball bearings are at the front of
the extended glides
Attach drawer right side to drawer assembly with
4 screws as shown.
Repeat steaps 11-14 for remaining drawer
14
assembly.
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer. It is
recommended to use coasters to protect surface from
heat and water.
weight limitations
Holds up to a 35 inch conventional tv or 60 inch flat
screen.
With assistance of another adult, insert glides of
drawer assemblies into corresponding glides of
case assembly. Keeping the drawer level, carefully
push the drawer until it is all the way in the case
and glides are securely engaged.
15
Assembly is now complete.
Made in Vietnam - r09 Page 5 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 6
chill MEDIA CONSOLE
wall mounting assembly
C
mounting
bracket
plastic
anchor
wall
strap
small
screw
A
D
mounting
bracket
large
screw
NOTE:
If you are unsure about your wall type or what
mounting method you should use, consult a
qualified professional or your local hardware store.
For added safety and stability, it is recommended that the wall mounting hardware be installed. For
safe mounting, it is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall,
concrete, etc.). Mount to wood studs whenever possible.
A) Attach mounting bracket to top of unit using 2 small screws.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below the
mounting bracket mounted to the back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill a hole in the wall that is slightly
smaller in diameter than the anchor. Gently tap the plastic anchor until the flange of the anchor is
flush with the wall.
D) Attach the mounting bracket to the wall by inserting 2 large screws through the mounting
bracket and into the wall anchor in the wall.
E) Place the unit so the mounting bracket on the back edge is allowed with the wall bracket.
F) Lace one end of the wall strap through both brackets, and into the other end of the strap.
G) Pull the strap tightly until secure.
Repeat step A-G for remaining wall mounting assembly.
Wall mounting assembly is now complete.
Made in Vietnam - r09 Page 6 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...