charlie
CABINET
assembly hardware
Thank you for purchasing the Charlie Cabinet. This page
lists all the contents included in the box. Please take the
time to identify the hardware as well as the individual
components to this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.
Note: 2 people are recommended to safely assemble this product.
components
16 - wood
dowels
2 - cams
18 - hinge
screws
screws
2 - small
bolts
3 - hinges2 - cam
mounting hardware
4 - large
screws
4 - small
screws
Missing hardware?
Please call 800.606.6387 for replacements.
4 - plastic
anchors
2 - wall
straps
13 - large
bolts
8 - shelf
pins
4 - mounting
brackets
1 - top
panel
2 - side panels
(1 left, 1 right)
1 - bottom
panel
1 - top back
crossbar
1 - bottom back
crossbar
1 - back
panel
1 - fixed
shelf
2 - adjustable
shelves
1 - door
panel
tools required
(We recommend the use of hand tools instead of power tools)
Made in Vietnam - r07 Page 1 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
phillips head screwdriver
charlie
CABINET
NOTE: Do not over
tighten the cam screw
left and right
side panels
Insert 8 wood dowels and 1 cam screw into
left and right side panels as shown, using a
phillips head screwdriver. Do not over tighten
1 2
cam screws.
NOTE: Do not over
tighten the bolts
top back
crossbar
top
panel
Fit pre-assembled dowels of top back crossbar
into corresponding holes of top panel and
secure with 2 small bolts, using a screwdriver.
Do not over tighten bolts.
top panel assembly
fixed shelf
left side panel
Fit top panel assembly, fixed shelf and
bottom panel onto corresponding dowels of left
side panel as shown. Secure assembly with 6
3
large bolts as shown.
bottom panel
back panel
Fit back panel into corresponding grooves of
assembly as shown.
4
Made in Vietnam - r06 Page 2 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
charlie
CABINET
NOTE: Make sure
arrow on each
cam points toward
nearest edge with holes
bottom back
crossbar
bottom back
crossbar
Insert 2 cams into bottom back crossbar as
shown.
5 6
left side
panel
Fit bottom back crossbar onto corresponding
dowels of left side panel. Using a screwdriver,
turn cam clockwise to securely engage cam
screw.
right side
panel
Fit dowels of right side panel into correspond-
Secure bottom back panel to assembly with 1
large bolt as shown.
Made in Vietnam - r06 Page 3 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
ing holes of assembly and attach with 6 large
bolts. Secure cam.
87
charlie
door panel
CABINET
NOTE: Do not over
tighten the screws
NOTE: Door can be attached
to open either to the left or the
right. Depending on preference,
attach hinges of door panel
to left or right side panel
with 4 hinge screws per hinge.
Attach 3 hinges to door panel with 2 hinge
screws per hinge, using a screwdriver. Do not
9 10
over tighten the screws.
LEFT-HINGED
DOOR ASSEMBLY
RIGHT-HINGED
DOOR ASSEMBLY
A
shelf pin
adjustable
B
shelf
With assistance of another adult, position unit
upright. Attach hinges of door panel to left side
panel with 4 hinge screws per hinge.
A
B
A. Insert 8 shelf pins into right side of assembly
A. Insert 8 shelf pins into left side of assembly
at desired shelf heights. Press firmly to secure.
B. Place adjustable shelves onto shelf pins.
11
Made in Vietnam - r06 Page 4 of 5
Make sure each shelf is securely supported.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
12
at desired shelf heights. Press firmly to secure.
B. Place adjustable shelves onto shelf pins.
Make sure each shelf is securely supported.
Assembly is now complete.
charlie
CABINET
hinge adjustment
If the doors do not appear square or aligned,
loosen or tighten the appropriate screws on
each case hinge as illustrated.
Side to side adjustment:
Loosen screw A, adjust gap with
screw B and re-tighten screw A
Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise
Height adjustment:
Loosen screw C, adjust door
height and re-tighten screw C
For added safety and stability, it is recommended that the wall
mounting hardware be installed. For safe mounting, it is essential
to use wall anchors appropriate to your wall type (i.e. plaster,
drywall, concrete, etc.). Mount to wood studs whenever possible.
NOTE: If you are unsure about your wall type or what
mounting method you should use, consult a qualified
professional or your local hardware store.
A) Attach 2 mounting brackets to top of unit using 2 small
screws per bracket.
B) Determine the final location of unit. Mark position on the wall,
approximately 2" below the mounting bracket mounted to the
back of the unit.
C) Drill a hole in the wall stud. If the wall stud is not available, drill
a hole in the wall that is slightly smaller in diameter than the
anchor. Gently tap the plastic anchor until the flange of the
anchor is flush with the wall.
D) Attach 2 mounting brackets to the wall by inserting 2 large
screws through each mounting bracket and into the wall anchor
in the wall.
E) Place the unit so the mounting brackets on the back edge are
aligned with the wall brackets.
F) Lace one end of the wall strap through both brackets, and
into the other end of the strap.
G) Pull the strap tightly until secure.
C
D
A
F
WALL
Wall mounting assembly is now complete.
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
Made in Vietnam - r07 Page 5 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...