cadet
WARDROBE
hardware
Thank you for purchasing the Cadet Wardrobe. This
page lists all the contents included in the box. Please
take time to identify the hardware as well as the
individual components of this product. As you unpack
and prepare for assembly, place the contents on a
carpeted or padded area to protect them from
damage.
NOTE: 2 people are required to safely assemble this product.
16 - flat
head
screws
10 - small
cams
38 - wood
dowels
8 - bumpers 8 - shelf pins2 - wall straps
Missing hardware? Please call 800.606.6387 for
replacements
14 - pan
head
screws
9 - large
cams
2 - plastic
anchors
8 - handle
bolts
32 - hinge
screws
11 - cam
covers
2 - mounting
screws
19 - cam
screws
8 - hinges
tools required
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
components
2 - side panels
(1 left, 1 right)
1- partition 2 - adjustable
1 - back panel
1- bottom shelf
2 - doors
1 - top panel 1- bottom panel
1 - top
shelf
2 - legs
shelves
2 - handles
2 - shelf
supports
Made in Thailand - r05 Page 1 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
cadet
WARDROBE
NOTE: Do not over
tighten the cams
screws
left side
panel
right side
panel
Insert 9 cam screws and 4 wood dowels into
left and right side panels. Secure, but do not
over tighten cam screws with a phillips head
1 2
screwdriver.
NOTE: Make sure
the arrows on each
cam points toward
the nearest edge with
holes
bottom
A
shelf
top
shelf
B
A) Insert 4 large cams and 4 wood dowels into
bottom shelf. Make sure arrow on each cam
points toward the nearest edge with holes.
B) Insert 4 large cams, 4 wood dowels and 1
cam screw into top shelf.
A
partition
top
shelf
partition
B
back panel
A) Insert 1 large cam and 4 wood dowels into
partition.
B) Insert 10 small cams and 14 wood dowels
3
into back panel.
Made in Thailand - r05 Page 2 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Fit dowels of partition into corresponding holes
of top shelf as shown. Using a screwdriver, turn
cam clockwise until it securely engages the cam
screw.
4
cadet
WARDROBE
bottom
shelf
Fit dowels of partition into corresponding holes
of bottom shelf as shown. Secure with 2 large
flat head screws using a screwdriver.
5
cam
cover
B
left side
panel
B
A
back panel
A) Fit dowels of back panel into corresponding
holes of left side panel as shown. Secure all
cams.
B) Fit dowels of assembled unit into
corresponding holes of left side panel as
6
shown. Secure all cams.
shelf
assembly
right side
A
panel
A) Fit dowels of assembled unit into
corresponding holes of right side panel. Secure
all cams.
B) At this point, cover all exposed cams with
7 8
cam covers.
Made in Thailand - r05 Page 3 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Fit dowels of assembled unit into corresponding
holes of bottom panel. Secure with 7 large flat
head screws as shown.
bottom panel
cadet
WARDROBE
top panel
leg
Attach 2 legs with 3 large pan head screws per
leg using a screwdriver.
9 10
A
shelf
support
NOTE: Do not over
tighten the screws
support
B
adjustable
shelf
Fit dowels of assembled unit into corresponding
holes of top panel. Secure with 7 large flat head
screws using a screwdriver.
hinge
A
B
door
handle
A) Insert 2 wood dowels into each shelf support.
B) Fit dowels of each shelf support into
corresponding holes of each adjustable shelf.
Secure each shelf with 3 large pan head screws
11
Made in Thailand - r05 Page 4 of 6
using a screwdriver.
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
12
A) Attach 4 hinges to each door with 2 hinge
screws per hinge, using screwdriver.
B) Attach 1 handle to each door with 4 handle
bolts, using a screwdriver.
cadet
WARDROBE
adjustable
shelf
With the assistance of another adult, position unit
upright. Insert 8 shelf pins at desired shelf
heights.
B) Place 2 adjustable shelves into assembled
unit. Make sure shelves are securely supported
13 14
by shelf pins.
shelf
pin
A
bumper
Attach 8 bumpers to shelves of assembled unit
as shown.
hinge adjustment
If the doors do not appear square or aligned, loosen or
tighten the appropriate screws on each case hinge as
illustrated.
A
B
2) Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise.
A) With assistance of another adult, attach hinges
of each door onto side panels of assembled unit as
shown. Secure each hinge with 2 hinge screws.
B) Secure the set screws with a screwdriver as
shown. Refer to Hinge Adjustment diagram for
adjusting the alignment of the door hinges.
15
Assembly is now complete.
Made in Thailand - r05 Page 5 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
B
1
C
C
3
1) Side to side adjustment:
Loosen screw A, adjust gap
with screw B and re-tighten
screw A.
A
B
2
3) Height adjustment:
Loosen screw C, adjust
door height and retighten screw C.
cadet WARDROBE
WALL
wall
strap
mounting
screw
BACK OF UNIT
pan head
screw
plastic
anchor
FRONT OF UNIT
optional wall mounting assembly
These instructions are for drywall mounting only. For safe installation
it is essential to use hardware appropriate for your wall type. Mount to
wood wall studs whenever possible. If you are unsure of what type of
fasteners to use, consult your local hardware store or a qualified professional. This product is only a deterrent, it is not a substitute for proper
adult supervision.
A. Attach 2 wall straps to back of unit with 1 mounting screw per strap
as shown. Secure, but do not over tighten with a phillips head screw-
driver.
B. With the assistance of another adult, place the unit in desired location
against the wall. Mark the location of the hole in the wall strap on the
wall. Move the unit out of the workspace.
C. Drill holes slightly smaller in diameter than the plastic anchor. Insert 1
plastic anchor into each hole until they are flush to the wall.
D. Place the unit back into position against the wall. Insert 1 pan head
screw through each wall strap and into the plastic anchor.
Wall mounting is now complete
Made in Thailand- r05 Page 6 of 6
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
.
Loading...