CB2 Brace Assembly Instructions Manual

brace

Thank you for purchasing the Brace dining table. This
page lists all the contents included in the box. Please take
the time to identify the hardware as well as the individual
components to this product. As you unpack and prepare
for assembly, place the contents on a carpeted or padded
area to protect them from damage.

Note: 2 people are recommended to safely assemble this product.

DINING TABLE

hardware

16 - bolts

Missing hardware?
Please call 800.606.6387 for replacements.

tools required

allen wrench (included)

(We recommend the use of hand tools instead of power tools)

components

1 - glass top

4 - legs

1 - crossbar

Fit 1 leg into end of crossbar as shown. Align
holes in crossbar with holes in legs and attach with
4 bolts. Secure each bolt with the allen wrench.

1

Repeat for remaining 3 legs.

Made in Vietnam - r02 Page 1 of 2

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com

brace

DINING TABLE

With assistance from another adult, position base assembly upright. Carefully place glass top onto base, making
sure glass is securely supported by the plastic bumpers.
Adjust levelers as necessary to compensate for uneven floors.

2

Assembly is now complete.

cleaning and care

Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners.
It is recommended to use coasters to protect surface from heat.

Made in Vietnam - r02 Page 2 of 2

Customer Service 800.606.6252 | Latest instructions available at www.cb2.com