CB2 Beulah rocking chair Assembly Instructions Manual
beulah
ROCKING CHAIR
hardware
Thank you for purchasing the Beulah rocking chair.
This page lists all the contents included in the box.
Please take the time to identify the hardware as well as
the individual components to this product. As you
unpack and prepare for assembly, place the contents on
a carpeted or padded area to protect them from damage.
Note: 2 people are recommended to safely assemble this
product.
components
8 - long bolts
Missing hardware?
Please call 800.606.6387 for replacements.
2 - short bolts
tools required
allen wrench
(included)
A
NOTE: Make sure
arrow labels point up
long
bolt
1 - back frame
2 - side frames
(1 right, 1 left)
1 - seat frame1 - crossbar
Made in Vietnam - r03 Page 1 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
B
A. With the assistance of another adult, fit back
frame and seat frame into left side frame. Make
sure arrow labels on each component point up as
shown.
B. Using the allen wrench, secure left side frame
1
to seat and back frames with 4 long bolts.
beulah
Attach crossbar to left side frame with 1 short
2 3
bolt, and secure with the allen wrench.
ROCKING CHAIR
A
long
bolts
B
C
short
bolt
A. Fit back frame, seat frame and crossbar into
right side frame.
B. Secure right side frame to seat and back frames
with 4 long bolts.
C. Secure crossbar to side frame with 1 short bolt.
Assembly is now complete.
cleaning and care
Clean surfaces with a dry or damp soft cloth. Do not use abrasive cleaners. Periodically, tighten bolts as necessary.
During normal weathering, wood may crack slightly due to changes in the moisture; this does not effect the structural integrity
of the furniture.
Store or keep covered during inclement weather and when not in use.
To preserve the original finish avoid leaving in direct sunlight for extended periods of time.
Made in Vietnam - r03 Page 2 of 2
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...