Page 1
a symmetric
CLOSET
assembly hardware
Thank you for purchasing the A Symmetric Closet.
This page
Please take the time to identify the hardware as well
as the individual components
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are recommended to safely assemble this product.
lists all the contents included in the box.
to this product. As you
components
16 - wood
dowels
6 - hinges 4 - pull
16 - large
bolts
bolts
2 - small
bolts
2 - back
screws
Missing hardware?
Please call 800.606.6387
for replacements.
mounting hardware
4 - large
screws
4 - small
screws
4 - plastic
anchors
4 - wall
brackets
tools required
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
36 - hinge
screws
2 - wall
straps
2 - pulls
1 - top panel
2 - side panels
(1 left, 1 right)
Made in Vietnam - r06 Page 1 of 5
1 - fixed shelf 1 - partition 1 - back panel 1 - bottom panel
1 - rod 1 - hook
assembly
1 - small
door
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1 - large
door
1 - 4 bin tray
2 - trays
(1 top, 1 bottom)
1 - 6 bin tray
1 - drawer bin
Page 2
a symmetric
CLOSET
NOTE: Do not over
tighten the bolts
A
B
fixed
shelf
partition
A. Insert 2 wood dowels into fixed shelf as
shown.
B. Fit partition onto dowels of fixed shelf and
attach with 2 large bolts. Secure, but do not
over tighten, with a phillips head screwdriver.
1 2
top
panel
fixed
shelf
B
B
A
right side
panel
A. Insert 4 wood dowels into right side panel
as shown.
B. Fit dowels of right side panel into corresponding holes of top panel and fixed shelf.
Secure top panel and fixed shelf with 2 large
bolts, using a screwdriver.
back
panel
With the assistance of another adult, carefully
slide back panel into corresponding grooves of
top and right side panel as shown.
3 4
left side
panel
A
B
A. Insert 4 wood dowels into top panel and
fixed shelf as shown.
B. Fit dowels of top panel and fixed shelf
into corresponding holes of left side panel.
Secure top panel and fixed shelf with 2 large
bolts.
Made in Vietnam - r06 Page 2 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 3
a symmetric
CLOSET
B
bottom
panel
C
A
B
A. Insert 6 wood dowels into left/right side
panels and partition as shown.
B. Fit dowels of left/right side panels and
partition into corresponding holes of bottom
panel. Secure bottom panel with 6 large bolts
as shown.
C. Secure back panel to assembly with 2 back
5 6
screws as shown.
B
hook
assembly
A
C
pull
small
door
A. Attach 3 hinges to small door with 2 hinge
screws per hinge, using a screwdriver.
B. Attach hook assembly to small door with 2
small bolts.
C. Attach 1 pull to small door with 2 pull bolts,
using a screwdriver.
rod
A
A
small
door
large
door
B
pull
A. Attach 3 hinges to large door with 2 hinge
screws per hinge, using a screwdriver.
B. Attach 1 pull to large door with 2 pull bolts,
using a screwdriver.
7 8
Made in Vietnam - r06 Page 3 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
6-bin tray
4-bin tray
top tray
bottom tray
A. With assistance of another adult, attach
hinges of small and large doors to hinges of
side panels with 4 hinge screws per hinge.
B. Fit rod onto pre-attached supports on side
panels of assembly.
C. Insert trays and drawer bin into assembly.
Assembly is now complete.
large
door
drawer
bin
Page 4
a symmetric
CLOSET
hinge adjustment
If the doors do not appear square or aligned,loosen or tighten the appropriate screws on each case hinge as illustrated.
1
A
B
Side to side adjustment:
Loosen screw A, adjust gap with
screw B and re-tighten screw A
2
A
B
Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise
3
C
C
Height adjustment:
Loosen screw C, adjust door
height and re-tighten screw C
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as the
unit is finished with a protective clear lacquer.
Made in Vietnam - r06 Page 4 of 5
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Page 5
a symmetric
CLOSET
optional wall mounting assembly
WALL
C
D
A
F
NOTE: If you are unsure about your wall type or what mounting method you should use, consult a qualified
professional or your local hardware store.
For added safety and stability, it is recommended that the wall mounting hardware be installed. For safe mounting, it
is essential to use wall anchors appropriate to your wall type (i.e. plaster, drywall, concrete, etc.). Mount to wood
studs whenever possible.
A) Attach 2 mounting brackets to top of unit using 2 small screws per bracket.
B) Determine the final location of unit. Mark position on the wall, approximately 2" below each mounting bracket on
the back of the unit.
C) Drill a hole in the wall stud. If a wall stud is not available, drill a hole in the wall that is slightly smaller in diameter
than the anchor. Gently tap the plastic anchor until the flange of the anchor is flush with the wall.
D) Attach the mounting brackets to the wall by inserting 2 large screws through each mounting bracket and into
the wall anchor in the wall.
E) Position the unit so the mounting brackets on the back of the unit are aligned with the wall brackets.
F) Lace one end of each wall strap through corresponding brackets, and into the other end of the strap.
G) Pull the straps tightly until secure.
Wall mounting assembly is now complete.
Made in Vietnam - r06 Page 5 of 5Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...