ash
BATH CABINET
assembly hardware
Thank you for purchasing the Ash Bath Cabinet.
This page
Please take the time to identify the hardware as well
as the individual components
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are recommended to safely assemble this product.
lists all the contents included in the box.
to this product. As you
components
12 - cams 8 - shelf
12 - cam
screws
supports
wall mounting hardware
2 - plastic
anchors
Missing hardware?
Please call 800.606.6387 for replacements.
2 - screws
tools required
phillips head screwdriver
(We recommend the use of hand tools instead of power tools)
NOTE: Make sure arrows
on cams point towards
nearest edge with holes
1 - top
panel
2 - doors
2 - adjustable
shelves
1 - side panels
(1 left, 1 right)
FACING INSIDE
1 - back
panel
Made in Vietnam - r04 Page 1 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
1 - leg assembly
1
right side
A
panel
left side
B
panel
NOTE: Do not over
tighten the cam screws
A. Insert 4 cam screws into left and right side
panels as shown. Secure, but do not over tighten,
cam screws with a phillips head screwdriver.
B. Insert 2 cams into left and right side panels as
shown. Make sure arrows on cams point towards
nearest edge with holes.
ash
BATH CABINET
leg assembly
A
top panel
B
back panel
Insert 4 cam screws into leg assembly as
2 3
shown.
NOTE: Make sure
label, “Facing Inside,”
on back panel is
positioned as shown
during assembly
FACING INSIDE
back panel
A
back panel
left side
panel
B
A. Fit pre-assembled dowels of back panel into
corresponding holes of left side panel as
shown.
B. Using a screwdriver, turn each cam clock-
4 5
wise until it securely engages each cam screw.
A. Insert 4 cams into top panel as shown.
B. Insert 4 cams into back panel as shown.
top
panel
FACING INSIDE
back panel
left side
panel
Fit dowels of top panel into left side panel as
shown and secure cams.
Made in Vietnam - r04 Page 2 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
ash
BATH CABINET
right side
panel
leg
assembly
Fit dowels of top panel into corresponding holes
of right side panel and secure cams.
6 7
Refer to Hinge Adjustment
diagram for adjusting the
alignment of the door hinges.
door
Fit hinges of each door onto corresponding
hinges of side panels and tighten with
8
pre-attached screw, using a screwdriver.
9
With the assistance of another adult, fit dowels
of side panels into corresponding holes of leg
assembly and secure cams.
WALL
Determine the final location of unit. With the
assistance of another adult, position unit upright
against wall and mark the 2 holes position in the
back panel. Set unit aside. Drill a hole in the wall
stud. If a wall stud is not available, drill a hole in the
wall that is slightly smaller in diameter than the
anchor. Gently tap the plastic anchors until the
flange of the anchor is flush with the wall. Align
holes of wall and unit. Insert 2 large screws
through the back panel and into the wall anchor in
the wall.
Made in Vietnam - r04 Page 3 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
ash
A. Insert 8 shelf supports into side panels as
shown.
B. Place 2 adjustable shelves onto shelf
supports. Make sure each shelf is securely
supported by shelf supports.
10
Assembly is now complete.
BATH CABINET
A
A
B
adjustable shelf
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do not use
abrasive cleaners. Do not use furniture wax or polish as
the unit is finished with a protective clear lacquer.
hinge adjustment
If the doors do not appear square or aligned,loosen or tighten the appropriate screws on each case hinge as illustrated.
1 2
A
B
Side to side adjustment:
Loosen screw A, adjust gap with
screw B and re-tighten screw A
Depth adjustment:
Loosen screw A, push hinge arm
forwards or backwards, re-tighten
screw A and secure screw B with
a 1/4 turn clockwise
A
B
3
C
C
Height adjustment:
Loosen screw C, adjust door
height and re-tighten screw C
Made in Vietnam - r04 Page 4 of 4
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
Loading...