Page 1
acacia NIGHTSTAND
hardware
Thank you for purchasing the Acacia Nightstand.
This page
Please take the time to identify the hardware as well as
the individual components
unpack and prepare for assembly, place the contents
on a carpeted or padded area to protect them from
damage.
Note: 2 people are required to safely assemble this product.
lists all the contents included in the box.
to this product. As you
components
12 - wood
dowels
Missing hardware?
Please call 800.606.6387 for replacements.
12 - cam
screws
12 - cams
8 - screws
tools required
phillips head screwdriver
NOTE: We recommend the use of hand tools instead of power tools.
1 - drawer back
1 - fixed shelf
1- top panel
2 - drawer sides
(1 left, 1 right)
1 - back panel
1 - drawer
bottom panel
2 - side panels
(1 left, 1 right)
Made in Vietnam - r04 Page 1 of 4
Customer Service 800.606.6252 I Latest instructions available at www.cb2.com
1 - bottom panel
1 - drawer front
Page 2
acacia NIGHTSTAND
NOTE: Make sure
arrows on each cam
points toward nearest
edge with holes.
left and right
side panels
bottom panel
A
top panel
B
fixed shelf
C
Insert 4 wood dowels, 2 cam screws, and 4 cams
into left and right side panels as shown. Make
sure arrows on each cam points toward nearest
1 2
edge with holes as shown.
NOTE: Make sure the groove
left side panel
Fit dowels of fixed shelf into corresponding holes of
side panels as shown. Make sure cams of fixed
shelf are positioned toward the glides as shown.
With a screwdriver, turn each cam clockwise until it
securely engages each cam screw.
3
on the side panels face
each other as shown.
fixed shelf
right side panel
4
A. Insert 4 cam screws into bottom panel as
shown.
B. Insert 4 cam screws into top panel.
C. Insert 4 cams and 4 wood dowels into fixed
shelf.
bottom panel
NOTE: Make sure the groove
on the bottom panel is on the
same side as the grooves on
the side panels.
Fit dowels of assembled unit into corresponding
holes of bottom panel. Secure all cams.
Made in Vietnam - r04 Page 2 of 4
Customer Service 800.606.6252 I Latest instructions available at www.cb2.com
Page 3
acacia NIGHTSTAND
back panel
With the assistance of another adult, position unit
upright as shown. Slide back panel down into
5 6
grooves of side and bottom panels as shown.
top panel
Fit dowels of assembled unit into corresponding
holes in top panel as shown. Make sure the
groove in the top panel fits over the back panel.
Secure all cams.
Place drawer front face down on clean, padded
surface as shown. Attach drawer left side with 2
screws as shown. Make sure the open end of the
glide on the drawer side panel is positioned
towards the back of the drawer. Secure screws
7
with a screwdriver.
Made in Vietnam - r04
drawer
left
drawer front
Slide drawer bottom into grooves of drawer
8
assembly as shown.
Customer Service 800.606.6252 I Latest instructions available at www.cb2.com
drawer bottom
Page 3 of 4
Page 4
acacia NIGHTSTAND
drawer back
right
drawer panel
Attach drawer back with 2 screws.
9 10
cleaning & care
Clean surfaces with a dry or damp soft cloth. Do
not use abrasive cleaners. Do not use furniture wax
assembled unit
drawer unit
or polish as the unit is finished with a protective
clear lacquer. It is recommended to use coasters to
protect surface from heat and water.
Attach drawer right side to the drawer assembly
with 4 screws as shown. Make sure the open end
of the glide on the drawer side panel is positioned
towards the back of the drawer.
Fully extend drawer glides from assembled unit.
Fit drawer glides of drawer assembly into
corresponding drawer glides of the assembled
unit. Push drawer assembly back until assembly
is secure.
11
Made in Vietnam - Page 4 of 4
Assembly is now complete.
Customer Service 800.606.6252 I Latest instructions available at www.cb2.com
Loading...