CAVS JB-99RG User Manual

CAVS USA INC

Quickstart Manual

For

Karaoke Jukebox

CAVS JB-99RG

1

CAVS USA INC

Contents

Page

1. Unpacking 3

2. Installation 4

2.1 TV monitor 4

2.2 Mixer-Amplifier 5

2.3 Microphone 5

2.4 Remote Control 6

2.5 Instruction sticker 6

3. Boot up 6

4. Operating JB-99RG 7

4.1 Basic operation of JB-99RG 7

4.2 Other functions 8

5. Programming bill acceptor 8

5.1 Password 8

5.2 Changing the price of a song 9

5.3 Setting the bill acceptor off 9

5.4 Setting the button control 10

5.5 Setting free credit 11

5.6 Setting title display 11

6. Collecting bills 11

7. Loading song updates 12

8. External background video 13

9. Mixer-amplifier 15

9.1 Master volume control 15

9.2 Vocal volume control 15

9.3 Base (LO) level control 15

9.4 Echo level control 16

10. Cassette recorder 16

9.1 Recording a song 16

11. Frequently Asked Questions (FAQ) 17

12. Technical Support 18

2

CAVS USA INC

1. Unpacking

The unit will come in two pieces, one carton box and one wooden crate.

The carton box includes:

TV monitor

The wooden crate includes:

JB-99RG
In the side pockets of JB-99RG:

Power cable
2 Keys
4 Screws
Songbook, Program CD-ROM, and Instruction sticker
2 Microphone hangers with 4 screws

In the back bottom compartment:

2 M-5 microphones
Remote Control
Manager’s kit: User’s Manual, Remote control, AV cable
Instruction sticker
FX cable
Swivel joint with 4 screws

Together they weigh 375lbs with dimensions 22” x 22” x 21” for the carton box
and 45” x 35” x 35” for the wooden crate. You are advised to have a forklift in the
receiving location to unload them from a truck.

1.1 To dismantle the wooden crate, use a screwdriver to take out the screws
from each side of the crate. Then using a crowbar, gently pry open the top
cover followed by four sidewalls. Next using the steel handles located on
three sides, lift the JB-99RG unit out of the bottom holder and gently place it
on the floor. Unlock the wheels on the bottom of the JB-99RG and roll the
unit into its place.

3

CAVS USA INC

1.2 When transporting the unit without its wooden crate, it is best to do so in its
upright position. If a height restriction does not allow such positioning, then
lay down the unit on its backside, preferably on top of a soft carpet for easy
sliding and protection. Use cushions on both ends of the unit for a balance
against the steel handle on the backside.

2. Installation

2.1 TV monitor

2.1.1 Remove the upper steel plate on top of the JB-99RG by unscrewing 4 bolts.

2.1.2 Attach the upper steel plate to the bottom of the TV monitor with 4 screws
that came in a side pocket of JB-99RG. The upper steel plate is design to fit
the bottom of the TV monitor in only one way with the 4 screw holes in line
with the 4 screw holes of the TV bottom.

WARNING: Tightening the screws onto the bottom of the TV monitor should be
done delicately as the screws may tear out the plastic grooves on the bottom of the
TV monitor if too much force is used.

2.1.3 If you would like to have the TV monitor swivel on top of the JB-99RG
case, you can make it so using the optional swivel joint found in the back
bottom compartment. Using 4 screws, first attach the swivel joint to the
upper steel plate now attached to the bottom of the TV monitor. Then place
the TV monitor (with the swivel joint) on top of the lower steel plate located
on the JB-99RG case. Lock the swivel joint to the lower steel plate with
additional 4 screws.

2.1.4 To set the TV monitor without swivel movement, place the TV monitor on
top of the JB-99RG with the upper steel plate sitting on top of the lower steel
plate. Screw the 4 bolts into the steel plates locking the two pieces together.

4

CAVS USA INC

2.1.5 Insert the power cord of the TV into the circular hole on the top of the JB­99RG and down to the bottom chamber. You should have the door to the
bottom chamber opened by now. Plug the power cord of the TV monitor
into the multi-outlet inside the bottom chamber.

NOTE: The multi-outlet may have come loose from its holders on the bottom of
the compartment while being transported. If so, place the multi-outlet into its
position on the floor of the compartment and lock it in position by sliding it against
its holders.

2.1.6 Connect the video RC cable on the top of the JB-99RG to the TV monitor
Video In.

2.2 Mixer-Amplifier

2.2.1 Set all round knobs of the mixer-amplifier at the 12 o’clock (center) position
except for the master volume (the largest round knob) that is to be set at 9
o’clock position.

2.2.2 Set all 4 white push buttons so that they are pressed out. Also set the power
button on.

WARNING: To avoid any damage to the mixer-amplifier and the speakers, please
consult with CAVS Tech Support before attaching any additional speakers to the
mixer-amplifier.

2.3 Microphones

2.3.1 Attach the 2 microphone hangers onto the right side of the JB-99RG using
the 4 screws that came together in a side pocket of the JB-99RG.

5

CAVS USA INC

2.3.2 Remove the microphones from their boxes and connect the headpieces to the
cords.

2.3.3 Insert the microphone jacks into the Mic1 and Mic2 Inputs of the mixer­amplifier on the back of the JB-99RG.

2.3.4 Place the microphones in the microphone hangers with the switches (located
on the headpieces) turned off.

WARNING: To prevent a possible damage to the mixer-amplifier from sudden
pull of microphones, tie the cords of the microphones to the steel handle on the
back of the JB-99RG.

2.4 Remote Control

2.4.1 Remove the remote control and batteries from the box. Insert the batteries
into the remote control.

2.5 Instruction Sticker

Remove the Instruction sticker included in the manager’s kit. Place the sticker on
the front panel of the JB-99RG.

3. Booting up

3.1 Find a power cord in a side pocket of JB-99RG and connect it to the AC
power socket on the back (bottom) of the JB-99RG. Plug the power cord
into a wall power outlet of 110V.

6