Cavalry Storage Computer Drive User Manual

Quick Start Guide

1.

1. Power Switch

3.

2.

2. eSATA

3. USB 2.0/3.0

4.

(actual product may vary)

4. Power Input

1. Connect your available/preferred interface to the drive and the computer.

Troubleshooting/FAQs

My Computer is not detecting the drive.

*Always check your disk management utility rst; instead of device manager.

1. Make sure the data cable is securely connected at both
ends. If you are still not able to nd the drive in your disk
management utility, switch to a dierent known-working
cable.

2. Some Cavalry drives are preformatted for either Windows
or Mac. If you are running an operating system that your unit
is not precongured for, you will need to reformat your drive.
For detailed instructions on how to reformat, visit our
website: www.cavalrystorage.com/su_download.htm.

3. If you have multiple external hard drives, your computer
may not be able to see your newest addition. Eject and/or
power-o all connected external drives except your Cavalry
unit. Then, if you’re using Windows, try assigning a new drive
letter to your Cavalry unit using Disk Management.

2. Connect the unit’s AC adapter.

3. Turn your unit on.

My unit does not match the one shown in this guide.

This is a general guide for new users. Your product may vary
from what is shown here.

My unit came with an eSATA bracket, but I don’t know
how to install it.

An eSATA bracket installation guide can be found on our
website at: www.cavalrystorage.com/su_download.htm.

My unit doesn’t work with eSATA; only USB.

Many motherboards ship with eSATA disabled to save power,
especially laptops. Make sure your eSATA ports are turned on
in your BIOS before troubleshooting.

My unit is making loud noises. Is this normal?

We apologize for the inconvenience. In most cases, loud
noises coming from the drive suggest that it is defective.
Please contact us at: [e-mail],
so that we can help resolve the issue quickly.

Do I need to backup my Cavalry drive too?

Always backup your data on multiple drives . Hard drives are
very sensitive, and sometimes fail without warning. Cavalry
Storage is not responsible for any data loss.

I keep getting the “Device Can Perform Faster” message.

This means that your computer does not support USB 3.0.
You will need to purchase an adapter card that allows you to
use the USB 3.0 protocol. Our authorized parts retailer sells
an excellent card for just this purpose; please contact us at
[e-mail] for more information.

4. Restart your computer. Your computer should detect the unit automatically.

5. Your external drive is ready to use !

How do I create a drive that can be used on both Mac and
Windows?

You need to format a drive specically with the FAT32 le
system. This can most easily be done on a Mac, in Disk Utility.
Just select the drive you want to use. Then select “Erase>MS
Dos (Fat)> Erase…” Once created, this disk will be usable by
both operating systems!

Contact Us

Call: 800.238.4453 (toll-free, USA only)

805.426.1000

Email: [e-mail]
Website: www.cavalrystorage.com