Catskill Craftsmen 1569 User Manual
Assembly Instructions
Model 1569
Open Storage Cuisine Cart
GENERAL:
1. You have purchased model 1569. Overall dimensions of an assembled unit is 22 1/8” x 15 1/4” x 34”.
2. Should you need assistance or need to replace a damaged or missing part, simply give us a call M-F at
607-652-7321 from 7:30 am - 4:30 pm EST and we’ll send you the prepaid part via UPS usually that same
day! You may also email us info@catskillcraftsmen.com.
3. Read the assembly instructions and the enclosed brochure before beginning assembly. Assembly is
easy if you read and follow the instructions step by step. See our website www.catskillcraftsmen.com, for
assembly tips and videos.
4. Toots required: Phillips screwdrivers - medium and small, medium at blade screwdriver, and a hammer.
5. Directions are given as if you are facing the front of an assembled cart.
CABINET HARDWARE
(Cabinet Assembly)
1 3/4” Phillips Flat Head Machine Screw (10)
(Drawer Back, Table Top Sticks)
1 1/4” Phillips Flat Head #8 Screw (12)
(Towel Bar)
1” Phillips Flat Head #8 Screw (2)
(Door Spacer)
5/8” Phillips Flat Head #8 Screw (2)
(Drawer Handle)
1/2” Truss Head Machine Screw (2)
(Knobs)
1 1/4” Truss Head Machine Screw (2)
(Doors)
1 1/2” Long 3/16” DIA. Steel Pin (4)
Towel Bar Post (2)
3/16” Flat Washer (4)
5/8 Wooden Disk (12)
Cam Posts (2)
10-24 Hex Nut (10)
Cam (2)
(Shelf Support)
1” Long 3/16” DIA. Steel Pin (8)
(Ends of Braces)
3/4” Long 3/16” DIA. Steel Pin (6)
MAGNET PACK
Magnet (1)
Magnet Plate (1)
5/8” Pan Head
Screw (2)
Cup Handle (1) Door Knob (2)
Caster Socket (4)
1/2” Phillips Flat Head
#4 Screw (1)
Locking Wheel Caster (2)
Non Locking Wheel Caster (2)
Polished
Nickel Towel
Bar (1)
TOP
CABINET PARTS - MODEL 1569
Drawer Bottom (1)
TOP
TOP
Handle Side Panel (1)
Cabinet Top(1)
Drawer Front (1)
Drawer Back (1)
Plain Side Panel (1)
Top/Bottom Brace (2)
Middle Brace (1)
Table Top Stick (2)
Drawer Dowel (1)
Back Panel (1)
Left Door (1)
Shelf (2)
Right Door (1)
Drawer Side Right (1)
Drawer Side Left (1)
Door Spacer (1)
STEP 1
Towelbar can go on either side of cart
Attach Table Top Sticks to Side Panels.
1 1/4” #8 Screw
1” Steel Pin
Repeat with other Side Panel
1” Steel Pin
1” Steel Pin
Not Used
Plain Side Panel
1” Steel Pin
Not Used
Handle Side Panel
Table Top Stick
Counter Sink Up
Not Used
Not Used
STEP 2
Attach Sides to Back Panel.
Towel Bar Post
Towel Bar
so choose which side you want.
Washer
We put it on the left.
1” #8 Screw
Top
Nut
1 3/4” Machine Screw
Bottom
Loading...