Caterlite CN203 Instruction Manual

Induction Cooker
Instruction Manual
UK
Safety Tips
Position on a flat, stable surface. A service agent/qualified technician should carry out installation and any repairs if
required. Do not remove any components on this product.
Consult Local and National Standards to comply with the following:
Health and Safety at Work Legislation BS EN Codes of Practice Fire Precautions IEE Wiring Regulations Building Regulations
DO NOT immerse the appliance in water. DO NOT leave the appliance unattended during operation. DO NOT move the appliance during cooking or with hot cookware on top of it. DO NOT use cookware with a diameter less than 12cm. DO NOT place empty cookware on the appliance. DO NOT place any magnetic objects on the glass surface during operation. DO NOT place metal objects/utensils on the appliance as they may become hot during
operation.
People with a pacemaker fitted should not use the appliance and keep a minimum of 60cm
from the appliance during operation.
Always switch off and disconnect the power supply to the appliance when not in use. Not suitable for outdoor use. If the glass surface is cracked disconnect from the power supply and consult your Caterlite
agent or recommended qualified technician.
Keep all packaging away from children. Dispose of the packaging in accordance to the
regulations of local authorities.
If the power cord is damaged, it must be replaced by a CATERLITE agent or a
recommended qualified technician in order to avoid a hazard.
This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Introduction
Please take a few moments to carefully read through this manual. Correct maintenance and operation of this machine will provide the best possible performance from your CATERLITE product.
Pack Contents
The following is included:
CATERLITE Induction Cooker Instruction Manual
CATERLITE prides itself on quality and service, ensuring that at the time of packaging the contents are supplied fully functional and free of damage. Should you find any damage as a result of transit, please contact your CATERLITE dealer immediately
UK
Induction Cooking
Induction cooking is a very efficient method of cooking as it reduces heat loss between the pan and the atmosphere by as much as 40%. This makes it extremely energy efficient, as well as offering immediate heat-up, unlike traditional heating methods which require time to get to temperature.
The Induction cooker works by creating a magnetic field within suitable cookware, which causes an instant build-up of heat to cook the food.
Installation
Maintain a distance of 10cm (5 inches) between the appliance and walls or other objects.
Cookware
Suitable cookware includes:
All magnetic pans such as Vogue Stainless Steel or Triwall pans. Mild steel or plain steel (black iron) pans Enamelled/non-enamelled cast iron and iron pans
Unsuitable cookware includes:
Cookware with a diameter of less than 12cm Ceramic or glass cookware Stainless steel, aluminium, bronze or copper cookware unless marked as suitable for
induction cooking
Cookware with feet Cookware with a rounded bottom (e.g. wok)
UK
Control Panel
Operation
1. Connect the appliance to the mains power supply.
2. Place suitable cookware on to the centre of the glass plate.
3. Press the On/Off button to turn the appliance On. The On/Off indicator will illuminate.
The Induction Hob will work by either running at a Power level or to a Temperature. When running at a fixed temperature, the power to the pan will reduce as the pan heats up.
Cooking using the Power Function
Press the function button. Power light will illuminate. The power rate can be adjusted by " or from 1-9.
Power Level
1 2 3 4 5 6 7 8 9
Left Hob (Watts)
500W
600W
800W
1000W
1200W
1400W
1500W
1600W
1800W
Right Hob (Watts)
400W
500W
600W
700W
800W
900W
1000W
1100W
1200W
Cooking using the Temperature Function
Press the FUNCTION button until the Temp light illuminates. Temperature can be adjusted by " or . Temperature is from 60 to 240
Function
Level
Increments
Default
Temperature
60C to 240C
20
180
Loading...
+ 7 hidden pages