CaterCool 688151, 688152 Operation Manual

688151-2 en ma 2012

OPERATION MANUAL

Please read these instructions carefully before installing and operating the dispenser.

P rofessional Supplies

JUICE DISPENSER

Modelnr.: *688.151 - *688.152

688151-2 en ma 2012

2

INDEX

WARNING

..............................................................................................................................................................

3

INSTALLATION

.....................................................................................................................................................

3

HOW TO USE

.........................................................................................................................................................

4

MAINTENANCE

.....................................................................................................................................................

5

INSTRUCTIONS FOR DISPOSAL

.....................................................................................................................

5

TECHNICAL SPECIFICATIONS

..........................................................................................................................

5

OPERATING FIGURES

........................................................................................................................................

7

TROUBLE SHOOTINGS

......................................................................................................................................

9

STRUCTURE DIAGRAM

....................................................................................................................................

10

688151-2 en ma 2012

3

WARNING:

1. This machine is a cold drink dispenser.

2. This instruction manual is an integral part of the machine and must be kept for any further consultation.

3. Warning: Never try to use this appliance for applications which are not described in the instructions

or in a way which is not described in the instruction or under conditions which are not similar those
described in the instructions, otherwise severe hazards may occur!

4. This machine should be used only for the purpose for which it was designed. Any other use is

inappropriate and therefore dangerous. The manufacturer will not be held responsible for any damage
caused by improper use.

5. Before installing and operating on the machine read carefully this operation mamual.

6. Keep the appliance out of reach for children! Do not allow children to play with the appliance.

7. Unplug the appliance from outlet when not in use, before putting on or taking off parts, and before

cleaning.

8. Be sure to unplug the appliance if not use the appliance in a long time.

9. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly

qualifi ed persons in order to avoid a hazard.

10. Do not use the appliance in a dusty environment or in an explosive atmosphere (infl ammable gases,

vapours, vapours from organic solvents).

11. Disable a defective appliance in an obvious way, so that it does not represent a hazard to others and

dispose of the appliance according to the regulations from the local authorities. Please see Instructions
for Disposal in this manual.

12. Other than cleaning mentioned in this instruction manual, no additional maintenance or servicing of this

appliance is required.

13. The motor is permanently lubricated and will require no oil.

14. Repairs, when necessary, must be performed at an authorized service facility.

15. The appliance is suitable for indoor use only.

16. Basic safety rules:
A. Do not touch the machine when hands or feet are wet.
B. Do not use the machine when barefooted.
C. Do not allow the machine to be used by children or untrained persons.
D. Do not leave the machine outside.
E. Do not pull on the electrical cord when unplugging the machine.

The company reserves the right to modify the construction or appearance without notice

INSTALLATION:

USEFUL INSTRUCTION FOR TRANSPORT

1. 1. In order to prevent the oil contained in the hermetic compressor from fl owing into the cooling circuit,

it is necessary to always carry, store and handle the machine in a vertical position, following the
instructions found on the packaging.

2. 2. If the machine was accidentally or purposely placed in a non-vertical position during transport,

before operating the machine, it should be kept in a straight position for approximately 30 minutes,
to allow the oil to fl ow back into the compressor.

UNPACKING: Remove cardboard and plastic covering. Make sure that the machine has not been damaged.
Remove the plastic fi lm from all the stainless steel panels(if has).

IMPORTANT: THE VARIOUS PACKAGING SHOULD BE KEPT FROM CHILDREN SINCE THEY ARE POTENTIALLY
DANGEROUS. DISPOSE THE PACKAGING ACCORDING TO THE REGULATIONS FROM THE LOCAL
AUTHORITIES.