Castwin DIC-500 Operation Manuals

Version 1

IP⇄ASI CONVETER

DIC-500

Operation Manual

2

DIC-500

IP⇄ASI Converter

Before Using ..

Before using this device, please read this manual carefully from the beginning to the end to fully exercise
its performa n c e and ensure l onger s ervice life t h rough the c o rrect u s e of products .

About Warranty ..

 The product warranty is included in the rear part of this users manual. We carry out free warranty
repair system for one year from the date of purchase of the product based on our warranty policy.
However, even during the warranty period, if there is no confirmation of our agent (or our
company), or any failures/damages of the product were caused by the customers negligence, the
actual cost of repair shall be charged. Therefore, please be sure to get a confirmation on the
warranty from our agent (or our company) where you have purchased our product.

 Please keep the box etc used for packaging well so you can be eligible for the after-sale service.

 The period of keeping parts for after service of this device is 8 years. For more information,

please contact our company.

※ Note : The parts for after service mean the circuits ·functional parts except the exterior.
(In accordance with our company regulation).

 This product is an electronic products, especially the internal circuitry is very sensitive to shock

and static electricity.

 Please avoid hot and humid place for storage.

 Optimum operating temperature is -10℃ ~ +40℃.

 Failures resulted by the customers negligence shall not be warranted by the manufacturer.

 Please be noted that falling apart of the sticker or label from the product or damaged parts may

be the direct cause of failure.

 Please do not remove the connecting cable or turn the power OFF while the system is operating.

Notice Warning

Before Using

3

DIC-500

IP⇄ASI Converter

Before starting ..

This manua l is a g u i debook with rega r d to t he m ethod of u s e and compo s ition of th e
IP⇄ASI Converter (Hereinafter “Device”). Before using this device, please be sure to read this manual
thoroughly. After unpacking the package, please check various components and, if you have any questions
or inquiries, please contact our agent from whom you have purchased the device or our company.

Safety Cautions (Please check without fail)

1. Cautions before installation of the product.

2. Cautions on product usage

 Please pay special attention not to install the device in the following places to avoid potential
failure of the device.

• A place directly exposed to sunlight or close to heating elements such as steam, heater,

stoves etc.

• Bad ventilation, humid and dusty area.

※ When using assembled on the system rack, please use a rack designed to be well
ventilated as possible.

• A place near to magnetizing equipments.

• An unstable place where is vibrating or sloping.

• A place near to strongly flammable substances such as alcohols, aerosol insecticide.

※ When cleaning this device, please lightly wipe out with a dry soft cloth applied with
poly-wax and then wipe out again with a dry cotton flannel for preservation.

 Before connecting power cord, please check the voltage for sure.
 After unpacking the package, please discard the vinyl pack. (Please keep it out of children’s

reach as it will be very dangerous if the child puts it on the head).

 If products are dismantled for repair by an unauthorized person, you may not be eligible for
the maintenance and repair service. Hence, in case of failure of the products, please contact
the dealer from whom you have purchased the product or our company.

 Please read carefully the users manual before using the product.
 When inevitably dismantle or repair the defects, please perform the work very carefully as the

parts or components are very sensitive.

 Please do not touch receptacles or power lines with wet hand for safety.
 Please be noted that the power line must be accurately plugged into the receptacles.
 Please do not wipe the products with substances containing alcohol such as thinner and

benzene etc.

 Please do not touch the terminal exposed to the outside as possible.
 Please operate the device in a well air-ventilating place.
 Please do not dismantle or repair device randomly.
 Please do not place heavy objects on the main body of the device.
 Please do not move the device during operation.
 Before unplugging the power cord, please pull out the power cord after shutting off the

power switch. In case of frequent unplugging and plugging the power during operation of the
device under the state that power switch is not shut off, abnormalities may be caused to the
device.
 If smoke arises or strange odor smells from the main body during the operation of the device,
immediately lower the power switch and contact the dealer or our company for necessary
technical supports and maintenance.

Before Starting

4

DIC-500

IP⇄ASI Converter

Release History

Edit Date Approved by Description

1 January 27, 2014 First Version

Release History