How it Works
CASTLE
Loading...
Tag
User Manual
44 pgs404.33 Kb0

CASTLE Meridian, Tag User Manual

Download
CARE TECH
CARE TECH
CARE TECH
CASTLE
CARE TECH
Welcome to
Welcome to Security and Peace of Mind
CARE TECH
CARE TECH
CARE TECH
CASTLE
CARE TECH
Contents
Introduction A1-3
Using Meridian with your PIN Code B1-7
Using Meridian with your Tag C1-8
When Problems Arise D1-2
Chime Facility E4
Continual Protection E6
Omitting Zones E8
Masked Detectors E9
Keypad Personal Attack E10
Changing or Adding Codes or Tags F4
Changing Date and Time F5
Reviewing Logs F6
Walk Testing Detectors F7
Testing your Sounder F8
✔
and/or
optional
optional
✔
CARE TECH
CARE TECH
CARE TECH
CASTLE
CARE TECH
THIS INFORMATION IS FOR USE BY THE INSTALLER ONLY
To simplify operation for the user and to avoid unnecessary confusion, the Meridian User Manual can be made up to include only relevant information.
Select the modules you require and insert into the binder supplied
Sections Content
Introduction A1-3
Using PIN Codes B1-7
(Select page B6 'Intelligent' or 'Without Intelligent Set)
Using Tags C1-8
(Select page C7 'Intelligent' or 'Without Intelligent Set)
When Problems Arise D1-2
Advanced Functions E1-10
Manager Menu F1-8
Using your Meridian Alarm System just couldn't be easier!
This is the Keypad from where you control your Alarm System.
A1
A1
You've Made the Right Choice
ag
The display gives you any important messages.
The 12 digit numeric keypad is where you use your PIN code.
The A B C D keys help simplify use.
The 4 display lights show the status of the protected areas controlled by your Alarm.
This is where you use your Tag.
MAINS FAIL
MAINS FAIL
A1
A2
The Meridian Keypad
ag
Before you switch Meridian on
you must ensure all doors and windows are securely closed and any pets are excluded from areas protected by movement sensors.
Close Doors
Close Windows
Exclude Pets
A1
A3
Security Checks
Using the Keypad With Your 4 Digit PIN Code
A1
B1
SETTING ALL
MERIDIAN TIME:
A1
B2
Leaving the building
If you are leaving the building, go to the Keypad and key in your 4 digit PIN code.
Exit tone starts.
Leave by the agreed exit route.
Close and lock the final exit door.
Finally, press the 'Push to Set' button (if fitted) that is mounted externally by the final exit door.
Exit tone will cease.
Meridian is now set.
(If the exit tone continues with an interrupted tone, you must re-enter the building, note the message on the display, and switch the alarm off with your PIN Code.)
A1
B3
Leaving the building
To enter the building you must use the agreed entry route and go straight to the Keypad.
Entry tone will be sounding.
"Beep - Beep - Beep - - - "
Key in your 4 digit PIN code.
Entry tone will cease.
Meridian is now UNSET.
MERIDIAN TIME:
A1
B4
Entering the building
If you wish to set Meridian and stay in the building.
(eg set the alarm at night)
Simply follow the same procedure.
Meridian's intelligent operating system will realise what you require and set only part of the system.
You will NOT need to press a 'Push-to-Set' button when you set only part of the system.
A1
B5
Part - Setting Meridian
MERIDIAN TIME:
A1
B6
Staying in the building
Intelligent Setting
SETTING B BEDTIME
To part set Meridian go to the Keypad and key in your 4 digit PIN code.
Exit tone will start.
Leave the protected area and retire to the unprotected area (eg upstairs).
After a pre-set time the exit tone will cease.
Meridian is now part set.
To part set Meridian go to the Keypad and key in your 4 digit PIN code and press 'B'.
Exit tone will start.
Leave the protected area and retire to the unprotected area (eg upstairs).
After a pre-set time the exit tone will cease.
Meridian is now part set.
MERIDIAN TIME:
A1
B6
Without Intelligent Setting
SETTING B BEDTIME
Staying in the building
To unset Meridian
Go to the Keypad
Entry tone will be sounding
"Beep - Beep - Beep- - -"
Key in your 4 digit PIN code.
Entry tone will cease.
Meridian is now unset.
A1
B7
Unsetting Meridian
MERIDIAN TIME:
ag
A1
C1
Using a Proximity Tag
Meridian's High Security Proximity Tag can be used to set or unset your Alarm System with the minimum of fuss or complexity.
The Tag contains NO batteries and is completely maintenance free.
Just touch the Tag to the logo to use.
A1
C2
ag
Using Tag
SETTING ALL
A1
C3
Leaving the building
To set Meridian, simply touch the Meridian Keypad as shown with the Tag.
The Keypad will "Beep" to acknowledge the Tag.
Exit tone starts.
Leave by the agreed exit route.
Close and lock the final exit door
Finally, press the 'Push to Set' button (if fitted) that is mounted externally by the final exit door.
Exit tone will cease.
Meridian is now set.
C4
Leaving the building
To enter the building you MUST use the agreed entry route and go straight to the Keypad.
Entry tone will be sounding
"Beep - Beep - Beep - - -".
Touch your Tag to the Keypad.
Entry tone will stop.
Meridian is now UNSET.
MERIDIAN TIME:
A1
C5
Entering the building
If you wish to set Meridian and stay in the building (eg set the alarm at night)
Meridian's intelligent operating system will realise what you require and set only part of the system.
You will NOT need to press a 'Push-to-Set' button if you set only part of the system.
A1
C6
Part - Setting Meridian
To Part Set Meridian go to the Keypad and touch your Tag to the Keypad.
The Keypad will "Beep" to acknowledge the Tag.
Exit tone will start.
Leave the protected area and retire to the un-protected area (eg Upstairs).
After a pre-set time the exit tone will cease.
Meridian is now Part Set.
C7
Intelligent Setting
Staying in the building
Without Intelligent Setting
C7
Staying in the building
ag
To Part Set Meridian go to the Keypad and touch your Tag to the Keypad.
The Keypad will "Beep" to acknowledge the Tag.
Immediately Press the 'B' key.
The "B' light will come on.
Exit tone will start.
Leave the protected area and retire to the un-protected area (eg Upstairs).
After a pre-set time the exit tone will cease, and the 'B' light will go off.
Meridian is now Part Set.
A1
C8
Unsetting Meridian
MERIDIAN TIME:
To Unset Meridian
Go to the Keypad.
Entry tone will be sounding.
"Beep - Beep - Beep - - -"
Touch your Tag to the Keypad
Entry tone will stop.
Meridian is now Unset
A1
D1
When Problems Arise
Just Key In Your PIN Code
or
ag
Present Your Tag
If an Alarm tone sounds
Just key in your PIN code
or
Present your Tag.
The Alarm will stop sounding.
The display will indicate the problem.
Press the 'YES' key.
Meridian will advise you on the action to take.
LOW VOLTS ALARM SILENCED
LOW VOLTS CALL ENGINEER
A1
D2
ag
ag
Silencing Alarms
When the alarm system has been reset after an alarm. A random 4-digit code may be displayed, along with the message "CALL ENGINEER".
Normally it is necessary for an engineer, from your installing company, to check the installation and reset the system for further use.
If you have caused the alarm in error.
Your alarm Receiving Centre (or alarm company) may permit you to reset the system without an engineer present. They will require you to quote this 4-digit code by telephone (advise them it is for a Castle 'MERIDIAN' system). In exchange you will be given a special code which will reset the system for that one occasion
only.
A1
D3
Engineer Reset
CALL ENGINEER 2105
More Advanced Functions
A1
E1
Sometimes your security needs will be a little more complex and you will need to use Meridian's A B C D keys.
This will be true if you need more than just a 'Day' and 'Night' setting.
MERIDIAN TIME:
A1
E2
The A B C D Keys
Your Installer can give names to two of the keys (B and D), so that you can easily identify their functions.
For example:
A = Set or Unset 'All of the System' B = Set or Unset 'Bedtime' C = Set or Unset 'Chime' D = Set or Unset 'Storeroom'
A1
E3
MERIDIAN TIME:
The A B C D Keys
MERIDIAN TIME:
For example, you may wish to be alerted if someone enters through a particular door during the day.
Simply press the 'C' key.
The 'C' light will come on.
If the door is opened now you will be alerted by a Chime.
To cancel the Chime function, Simply press 'C' again.
MERIDIAN TIME:
A1
E4
The 'Chime' Facility
ag
MERIDIAN TIME:
MERIDIAN TIME:
A1
E5
ag
Protection of Other Areas
Maybe during the day you wish to protect your Garage, Shed or Storeroom
Simply enter your 4 digit PIN Code and Press 'D'.
or
Present your Tag and Press 'D'.
The 'D' light will come on.
The setting tone will sound.
When it stops, area 'D' is armed.
The 'D' light will go out.
To gain access to the protected area 'D', simply Enter your 4 digit PIN Code.
or
Present your Tag
Area 'D' is disarmed.
ag
MERIDIAN TIME:
A1
E6
Continual Protection
If Meridian is set at night, protecting Downstairs and the Storeroom (D), you may wish to leave the Storeroom protected when you switch the Alarm off in the morning.
In this case, enter your 4 digit PIN Code and press 'D'.
or
Present your Tag. Press 'D'.
You must press 'D' within 5 seconds of entering your code/Tag.
Meridian will switch off downstairs, and set 'D' to protect the Storeroom!
Pressing one of the function keys within 5 seconds of entering your PIN Code, or presenting your Tag, will force Meridian to Set or Unset in a specific way.
eg:
CODE/Tag and 'A' = Set 'ALL'
CODE/Tag and 'B' = Set 'BEDTIME'
PRESS 'C' = Set 'CHIME'
CODE/Tag and 'D' = Set 'STOREROOM'
A1
E7
To summarise
MERIDIAN TIME:
At some time you may wish to manually omit a zone. For example, to isolate a detector if a pet is in a room.
Enter your PIN Code or present your Tag.
While the exit tone is sounding press the 'YES' key.
Key in the number of the zone you wish to omit and press 'YES' If it has been accepted it will be displayed on the screen.
Repeat for any other zones that need to be omitted.
Leave via the agreed exit route in the usual way.
This zone will be omitted for this one period only and will need manually omitting next time, if needs be.
MERIDIAN
OMIT ZONE? ....
A1
E8
Omitting a zone when leaving the building
This function
needs to be
enabled by your
installation
company
A1
E9
Masked Detectors
LOUNGE (MAY BE MASKED)
ag
This high security feature acts to draw the users attention to detectors that have not been activated during the day by movement.
Simply key in your PIN Code or present your Tag to set Meridian as usual.
If the 'masked' message appears in the display: Activate each detector indicated and return to the Keypad.
The 'masked' message(s) should have disappeared.
Key in your PIN Code
or
Present your Tag again to set Meridian.
If you wish to set Meridian without activating the zones, press the 'Yes' key.
This function
needs to be
enabled by your
installation
company
If you ever need to summon personal assistance in an emergency, Meridian allows you to do so silently.
Simply Press the '4' and '6' keys at the same time.
This will send a silent signal to the monitoring centre.
To reset Enter your PIN Code or present your Tag.
Note.
This facility is only available if your system has 'Remote Signalling' and is enabled by your alarm installer.
A1
E10
Keypad Personal Attack
ag
MERIDIAN TIME:
Manager Menu
A1
F1
The Manager Menu is accessed by keying in your Manager PIN Code.
You then have a choice of:
Set System? Change Codes? (Tags) Set Date and Time? View Logs? W alk Test? Bell Test? Exit Manager Menu?
Pressing the 'NO' key will take you from one Menu to the next (as well as 'Escaping' from within a Menu)
Pressing the 'YES' key will take you into a Menu (as well as 'Accepting' a choice within a Menu)
WALK TEST
Manager Menu
A1
F2
MERIDIAN TIME:
To Set Meridian
Press'YES'
To move to the next Menu Press 'NO'
Remember 'YES' will let you enter the Menu
'NO' will move you to the next Menu
To enter the Manager Menu
Key in your MANAGER PIN Code
The first Menu choice asks you if you wish to 'Set System'?
SET SYSTEM?
A1
F3
Manager Menu
MERIDIAN TIME:
Press 'YES'
(Press 'NO' To move to the next Menu)
Meridian identifies each of the 15 Users by a different User
Number. eg. 'John' would be user 01 - 'Jane' would be user 02 etc.
User 15 is the manager.
Now key in the User Number whose PIN Code/Tag you wish to add or change, and press 'YES'
Key in the new 4 digit PIN Code. you require or present the new Tag. (Codes ending ‘00’ NOT accepted)
Press 'YES' (To delete a code, or Tag press 'C')
Repeat the same procedure for each of the users PIN Codes or Tags. that need to be added or changed.
When you have finished Press 'NO' to go to the next Menu.
Change or add new PIN Codes/Tags
USER NUMBER>_ _
ENTER CODE = 1234
USER NUMBER>_ _
CHANGE CODES?
A1
F4
USER NUMBER>02
CHANGE CODES?
Press'YES'
(Press 'NO' To move to the next Menu)
Enter Year eg. 96 Press'YES'
Enter Month eg. 10 Press'YES'
Enter Date eg. 21 Press 'YES'
Enter Hours eg. 22
(24 hour clock)
Press 'YES'
Enter Minutes eg. 12 Press 'YES'
To go to the next Menu. Press 'NO' again
SET DATE & TIME?
YEAR 96 - 59 = _ _
MONTH 1 - 12 = _ _
DATE 1 - 31 = _ _
HOURS 0 - 23 = _ _
MINUTES = _ _
A1
F5
Change Date and Time
9 6
1 0
2 1
2 2
1 2
Press'YES'
(Press 'NO' To move to the next Menu)
Press'YES'
To advance through the Logs Press 'YES'
To stop Review Press 'NO'
To move to the next Menu, press 'NO' again.
Review History Log
REVIEW LOG?
USER LOG
AN EVENT DA TE AND TIME:
A1
F6
REVIEW LOG?
FRONT DOOR
NONE
WALK TEST?
Press 'YES'
(Press 'NO' To move to the next Menu)
All zones to test will scroll in the display
Walk around the building and operate all the detectors
When all detectors have been activated and are working, the display will show 'NONE'
To move to the next Menu Press 'NO'
WALK TEST?
A1
F7
Check all detectors are working
Press 'YES'
(Press 'NO' To move to the next Menu)
Press 'YES' Bell will sound
Press 'YES' Strobe light will flash
Press 'NO' to escape to Main Menu
To exit from Manager Menu and return to normal Mode Press 'YES'
Test your Alarm sounders
BELL TEST?
BELL ON
STROBE ON
BELL TEST?
EXIT MANAGER?
MERIDIAN TIME:
A1
F8
Loading...
Buy Points How it Works FAQ Contact Us Questions and Suggestions Privacy Policy Cookie Policy Terms of Use