Page 1
Livre.book Page 2 Mercredi, 23. mai 2012 3:25 15
DEFENDING WORLD SECURITY
Description of the main icons
Send a
status
message
Access fast menu
Write a text message
End/reject
a call
Dial/accept a phone call
Loudspeaker
ICONS DESCRIPTION
Bottom
microphone
Connect charger
Transmitting a one-way call
Receiving a one-way call
Status message/s received
Battery bar icon
Signal strength bar icon
Adjust
volume
Connect
accessories
Earpiece
Loudspeaker in use
talkgroups
Access the list of
or the list of channels
Loudspeaker and earpiece not in use
Top microphone selected
Speakers and tones muted
Keypad locked
THR9i
Quick Guide
Text message/s received
Scanning activated
Air interface encryption not in use
Transmission barring active
Connection to network lost, limited
services available
UM
PS11357AENAA01
05/2012
Navigate through
keypad
menu items or
GPS receiver on
Access
functions
displayed
on the screen
corresponding
Navigation
This document is the property of Cassidian Finland Oy and should not be copied or circulated without permission.
www.cassidian.com
TRA/TR/APP/00034 01.01/EN
Getting familiar with your radio
Switch power on/off
loudspeaker
Activate/deactivate
group call or
dispatcher call
Make e.g. a home
depending on your
Make a red key call
Select group
and channel, or
press to select
home group
(group selector,
back key)
(duty key)
configuration
(PTT key)
Push to talk
Page 2
Livre.book Page 1 Mercredi, 23. mai 2012 3:25 15
Getting started
Install the battery
1 Slide the battery in the radio body
2 Press the bottom part of the battery into its
position until it clicks
Install the antenna
Turn the antenna clockwise in its dedicated slot
on top of the terminal
Switch the radio on
1 Press and hold the power on/off switch
2 If the radio asks for a phone or a security code,
enter these and select OK
Note: the initial phone code is 1234
Note: this Quick Guide aims at helping users get
started with their radio. The detailed
information on radio usage is available in the
full User Guide at
https://pmronline.cassidian.com
.
Making and receiving calls (1/2)
Make a call
Group call
1 Press
2 Scroll to the desired folder
3 Choose Select
4 Turn the group selector until you reach the
desired group
5 Press and hold the PTT key
6 Start speaking when a short tone is played
Express call
1 To a TETRA number: type the number
To a phone number: type the number, press
and scroll to Phone
2 Press and hold the PTT key
Phone call
1 Enter the area code and phone number
2 Press
3 Scroll to the relevant number type among
Private, Abbr. number, Phone, or Office ext. no.
4 Press
Making and receiving calls (2/2)
Red key call
Press and hold the red key call button to call the
predefined destination
Call in direct mode
1 Select Menu→Settings→Phone settings
→Active mode→Direct
2 Turn the group selector until you reach the
desired channel and press the back key to select
the relevant group
or
enter the recipient's number
3 Press and hold the PTT key
Respond to a call
Phone call
Press
Group or Express call
1 Press and hold the PTT key
2 Start speaking when a short tone is played
Sending text messages
Send a status message
1 Press
2 Scroll to the relevant status message
3 Select OK
4 Enter the phone number or search for the
recipient
5 Select OK
6 Scroll to the relevant number type
7 Select Send
Send a text message
1 Press
2 Write the message
3 Select Send
4 Enter the phone number or search for the
recipient
5 Select OK
6 Scroll to the relevant number type
7 Select Send
Note: your organisation may predefine different
functions for the
and key
Loading...