caso Stainless steel kettle CK300 14
5.2 How to use
5.2.1 To boil water
1. Fill the kettle with water to the desired level (between the minimum and maximum).
2. Place the kettle on the base. Be sure the base is on a flat, level, stable surface and is
plugged into an approved electrical outlet.
3. Press the temperature selector until 212°F is reached.
4. Press Start/Stop button. The actual temperature will be displayed as the kettle heats up.
5. When the water reaches 212°F, the kettle will beep and then shut off.
6. To turn the kettle off at any time during use, press the Start/Stop button.
5.2.2 To heat water to programmed temperature
1. Fill the kettle with water to the desired level (between the minimum and maximum) and
place kettle on the base.
2. Press the temperature selector until the desired temperature is reached. Blue dot will
indicate the temperature you selected.
3. Press Start/Stop button. The actual temperature will be displayed as the kettle heats up.
4. When water reaches the selected temperature, the kettle will beep and then shut off.
5. To turn the kettle off at any time during use, press the Start/Stop button.
5.2.3 To use Keep Warm Function
1. After selecting temperature, press the Keep Warm button, then press Start/Stop. Kettle
will keep water hot for 30 minutes after the selected temperature is reached. The Keep
Warm button illuminates to indicate this feature is ‘on.’ Press Start/Stop again to turn off
this function.
2. After 30 minutes with the kettle remaining on the base, a beep will indicate that the
keep-warm time has ended. The 30 minutes will be reset if the kettle is lifted off the
base and placed back within 2 minutes.
3. When 212°F is selected, the Keep Warm function will keep the water temperature below
boiling. To bring it back up to 212°F, press the Start/Stop button twice. The kettle will
beep to indicate that is has reached 212°F.
6 Cleaning and maintenance
This chapter provides you with important instructions and maintaining the device. Please
observe the instructions to prevent damages due to cleaning the device incorrectly and to
ensure trouble-free operation.
6.1 To clean water kettle
1. Always unplug the appliance before cleaning.
2. To clean kettle, rinse occasionally with clean water. Do not immerse in water.
3. To clean base, simply wipe with a damp cloth. Do not use abrasive detergents. Never
rinse or immerse the base in water. If base has surface stains or spots, use a stainless
steel cleaning agent.