Casio Computer Co MG31MBPACK Users Manual
English-1
CASIO Signage
Basic Operation Guide
E
Important!
Before using the product, be sure to read the information in this manual under “Safety Precautions” and “Operating Precautions”, and
ensure that you always use the product correctly.
Keep this manual in a safe place for future reference.
CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to any one of the reasons listed below.
Accidents due to man-made or natural disaster, earthquake, or any other act of god
–
Loss due to incorrect or improper use of the product
–
Accidents due to improper assembly or handling of the product
–
The illustrations shown in this manual may differ somewhat from the actual appearance of the product.
The contents of this manual are subject to change without notice.
SDHC Logo is a trademark of SD-3C, LLC.•
Other company and product names may be registered trademarks or trademarks of their respective owners.•
Unpacking
Safety Precautions
About the Safety Symbols
Various symbols are used in this User’s Guide and on the product itself to ensure safe operation and to prevent injury to you and others,
and to prevent physical damage. The meanings of the symbols are explained below.
Warning
This symbol indicates information that, if ignored when using the product, could possibly create the risk of death or
serious personal injury.
Caution
This symbol indicates information that, if ignored when using the product, creates the risk of personal injury or
material damage.
Safety Symbol Examples
/
A triangle indicates something you need to be aware of. The symbol shown here cautions against electric shock.
!
-
A circle with a line through it indicates something you should not do. An illustration inside of or near this symbol indicates
exactly what is prohibited. The symbol shown here means you should not try to take the product apart.
$
0
A black circle indicates something you should do. An illustration inside of or near this symbol indicates exactly what is
required. The symbol shown here means you should unplug the power plug.
Warning
-
Do not lean against or climb up on the Signage Unit or screen. Doing so can cause the item to tip over, creating the risk of fire,
electric shock, and personal injury.
+
Be sure to locate the Signage Unit on a flat, stable surface. Locating the Signage Unit on an unstable surface can cause it to
fall, creating the risk of fire, electric shock, and personal injury.
-
Make sure that insects do not get into the Signage Unit case. Insects inside the case can cause malfunction.
Fire, odor, heat generation, and other abnormalities
-
Should you ever notice fire, strange odor, or any other abnormality, immediately stop using the Signage Unit. Continued use
creates the risk of fire and electric shock. Immediately perform the steps below.
1. Unplug the power plug.
2. Request servicing and repair from your original dealer or authorized CASIO service center.
Do not use a malfunctioning product
-
Immediately stop using the Signage Unit if the screen appears abnormal, or if any other abnormal operation occurs even
though you are operating the Signage Unit correctly. Continued use creates the risk of fire and electric shock. Immediately
perform the steps below.
1. Turn off power.
2. Unplug the power plug.
3. Request servicing and repair from your original dealer or authorized CASIO service center.
Battery
Misuse of batteries can cause them to leak and stain the area around them, or to explode, creating the risk of fire and personal injury.
Make sure that you always observe the following precautions.
-
Never try to take batteries apart and do not allow them to become shorted.•
Never expose batteries to heat or throw them into fire.•
Never try to charge batteries.•
+
Take care that the battery is oriented correctly when you load it.•
Button batteries
+
Keep button batteries out of the reach of small children to make sure they are not swallowed accidentally. Should a button •
battery ever be swallowed, contact a physician immediately.
RJA529152-039 MA1409-D
The Signage Unit comes with the items listed below.
Signage Unit•
SD card•
Remote controller (YT-51)•
Test battery (CR2025 × 1, loaded in the remote controller)•
Nickel metal hydride battery (for system backup)•
AC adapter•
Basic Operation Guide (This manual)•
Hex wrench•
Ad sheet (sample)•
CASIO Signage User Documentation and Software
For detailed user documentation and downloadable software, visit the CASIO website.
MG-30MBPACK_e.indd 1 2014/08/25 15:09:23
English-2
AC adapter
+
Misuse of the AC adapter creates the risk of fire and electric shock. Make sure that you always observe the precautions below.
Make sure that you use a power source with the same voltage as that specified for the AC adapter.•
Use only the power cord that comes with the Signage Unit. •
Use only the AC adapter that comes with the Signage Unit. •
-
Do not use the power cord that comes with the Signage Unit to power another device. •
Do not use the AC adapter that comes with the Signage Unit to power another device. •
Do not overload a single electrical outlet with too many devices.•
+
Misuse of the AC adapter can damage it and create the risk of fire and electric shock. Make sure that you always observe the
precautions below.
-
Never place heavy objects on the AC adapter and never expose it to heat.•
Never try to modify the AC adapter or subject it to excessive bending.•
Do not twist the power cord or pull on it.•
+
Should the power cord become damaged, Contact your original dealer or authorized CASIO service center.•
"
Never touch the AC adapter while your hands are wet. Doing so creates the risk of electric shock.
+
Never use the AC adapter while it is wet. Water creates the risk of fire and electric shock.
%
Never place a vase or any other container of liquid on top of the AC adapter. Water creates the risk of fire and electric shock.
Water and foreign matter
+
Never allow the Signage Unit to become wet. Water creates the risk of fire and electric shock.
%
Never place a vase or any other container of water on top of the Signage Unit. Water creates the risk of fire and electric shock.
%
Water or other liquid, or foreign matter (metal, etc.) getting into the Signage Unit creates the risk of fire and electric shock. If
the Signage Unit becomes wet, immediately perform the steps below.
1. Turn off power.
2. Unplug the power plug.
3. Request servicing and repair from your original dealer or authorized CASIO service center.
Caution
AC adapter
+
Misuse of the AC adapter creates the risk of fire and electric shock. Make sure that you always observe the precautions below.
Insert the plug into the power outlet as far as it will go.•
After use unplug the power plug from the power outlet.•
Unplug the power plug from the power outlet before going on a trip or if you do not plan to use the Signage Unit for a long •
time.
At least once a year, unplug the power plug and use a dry cloth or vacuum cleaner to clear dust from the area around its •
prongs.
-
Do not use the AC adapter while it is covered with a blanket, or located next to a heating device. Such conditions can •
interfere with heat radiation, and cause local heat build up.
When unplugging the power cord, always grasp the plug, and do not pull on the power cord.•
Never use detergent to clean the power cord, especially the power plug and jack.•
Battery
Misuse of batteries can cause them to leak and stain the area around them, or to explode, creating the risk of fire and personal injury.
Make sure that you always observe the following precaution.
-
Use only the battery type specified for the remote controller.•
+
Remove the battery from the remote controller as soon as possible after it goes dead.•
Remove the battery from the remote controller if you do not plan to use it for a long time.•
Disposing of batteries
Make sure that you dispose of used batteries in accordance with the rules and regulations in your local area.
Cleaning the interior of the Signage Unit
Allowing dust to build up inside the Signage Unit by not cleaning it for long periods creates the risk of fire and accident, and can cause
loss of projection luminosity. Periodically clean the interior of the Signage Unit.
Laser Precautions
The projector built into the Signage Unit is a Class 1 laser device that conforms to IEC 60825-1.
The Signage Unit has a built-in laser module. Disassembly or modification is very dangerous and should never be attempted.
Operating Precautions
Do not use or store the Signage Unit in any one of the locations described below. Such locations create the risk of malfunction of and
damage to the Signage Unit.
Locations exposed to direct sunlight•
Outdoors or locations where there are large amounts of dust•
Locations subjected to large amounts of oil smoke or other smoke•
Locations subjected to vibration•
Near water (fountains, etc.) or other locations where there is risk of wetting•
Near heating equipment or other sources of high temperatures•
Near shop entrances or stairways•
Note the precautions below when selecting a location for the Signage Unit.
Avoid locations where the Signage Unit could be tripped over or otherwise interfere with foot traffic.•
When routing cables, take care to select locations where there is no chance of their being tripped over.•
Take care to locate the Signage Unit and screen where individuals (especially children) cannot touch them or hang from them.•
Do not look directly into the light emitted from the Signage Unit.
Should you ever notice a component has dropped out of the Signage Unit, immediately stop using it and contact your original dealer or
authorized CASIO service center.
Should you ever notice breaks or cracks in the screen, immediately stop using it and contact your original dealer or authorized CASIO
service center.
Use under high ambient temperature or in environments subjected to large amounts of dust, oil smoke, tobacco smoke, or other types
of smoke can shorten the replacement cycles and require more frequent replacement of the optical engine and other components. Note
that you are charged for such replacement. For details about replacement cycles and fees, contact an authorized CASIO service center.
Ensure that the remote control signal receiver is not exposed fluorescent light, sunlight, or other strong light. Strong light can cause
malfunction.
When projecting, adjust the position of the screen so that width of black space surrounding the projected image in the screen becomes
even.
When cleaning the unit, always use a soft and dry cloth. Do not use a wet cloth or solvent.
D
MG-30MBPACK_e.indd 2 2014/08/25 15:09:23
Loading...