Casio Computer Co EXFR10CT User Manual
Digital Camera
User’s Guide
EN
Thank you for purchasing this CASIO product.
• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
Accessories
As you unpack your camera, check to make sure that all accessories shown below
are included. If anything is missing, contact your original retailer.
Camera
(EX-FR10)
Lens hood Tripod nut Neck strap
Carabiner strap
Micro USB cable Basic Reference
Controller
(EX-FR10CT)
USB-AC adaptor
(AD-C53U)
Hinge Unit
• The hinge unit comes
pre-attached to the
camera.
Power cord*
* A power cord is included with the AD-C53U USB-AC adapter.
2
Read this first!
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost
profits, or claims by third parties arising out of the use of EXILIM Link.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in excess of 99.99%. This means that some very small number
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
3
Contents
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
Read this first! . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
General Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Monitor Screen Contents and How to Change Them . . . . . . . . . . . . . . . . . . . . 8
]\
Quick Start Basics 10
What you can do with your CASIO camera . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Using the Attachment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
]
Controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
]
Hinge Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
]
Lens hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
]
Tripod nut . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
]
Strap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Using the Touch Panel. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
First, charge the battery prior to use.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Turning Power On and Off. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
]
Camera-Controller Wireless Connection (Bluetooth) . . . . . . . . . . . . . . . . . . . . . 26
Configuring Basic Settings the First Time You Turn On the Camera. . . . . . . . 26
Preparing a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
]
Supported Memory Cards. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
]
To load a memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
]
To format (initialize) a new memory card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Shooting a Snapshot . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Premium Auto) . . 31
Snapshot Shooting Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
]\
Recording Images 33
REC Mode Screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
Shooting Multiple Images at a specified Interval . . . . (Interval Snapshot) . . 34
Self-shooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .(Mirror) . . 36
Changing the Recording Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Using the Self-timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Self-timer) . . 38
Shooting with Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Recording a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
]\
Advanced Recording Settings 42
Recording Beautiful Portraits . . . . . . . . . . . . . . . . . . . . . . . . . . (Make-up) . . 43
Using Touch Shutter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Touch Shutter) . . 43
Changing the Image Size . . . . . . . . . . . . . . . . . . . . . . . . . . . (Image Size) . . 43
Specifying the Maximum Movie Recording Time . . (Max Recording Time) . . 44
Shooting with Brightness Compensation . . . . . . . . . . . . . . . . . . (EV Shift) . . 45
Adjusting Hue when Shooting . . . . . . . . . . . . . . . . . . . . . . (White Balance) . . 46
Enabling Auto Rotation of Images to
Match Camera Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . (Auto Rotate) . . 47
4
Contents
]\
Viewing Snapshots and Movies 48
Play Mode Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Viewing Snapshots . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Viewing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Deleting Snapshots and Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Zooming an On-screen Image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Viewing the Image Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Rotating an Image (Rotation). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Creating a Collage of a Day’s Snapshots . . . . . . . . . . . . (Highlight Photo) . . 53
Creating a Movie of a Day’s Images . . . . . . . . . . . . . . . . (Highlight Movie) . . 54
Changing the Highlight Score of an Image . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
]\
Connecting the Camera with a Smartphone
(Wireless LAN) 56
Controlling Your Camera with a Connected Smartphone . . . . . . . . . . . . . . . . 56
Establishing a Connection between a Smartphone and Your Camera . . . . . . 57
]
Installing the EXILIM Link App on Your Smartphone . . . . . . . . . . . . . . . . . . . . . 57
]
Configuring Wireless LAN Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Using a Smartphone as a Camera Remote Controller . . . . . . . . . . . . . . . . . . 59
Sending a Snapshot or Movie File from Camera Memory to a Smartphone . . 60
Changing the Camera SSID and Password . . . . . . . . . . . . . . . . . . . . . . . . . . 61
]\
Other Settings (Set Up) 63
Configuring Camera Sound Settings . . . . . . . . . . . . . . . (Camera Sound) . . 63
Using the Vibration Function . . . . . . . . . . . . . . . . . . . . . . . . . . . (Vibration) . . 63
Controller Startup Using a Flick Operation . . . . . . . . . . . . . . . (Flick Start) . . 63
Setting the Camera’s Clock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Adjust) . . 64
Specifying the Date Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . (Date Style) . . 64
Specifying the Display Language . . . . . . . . . . . . . . . . . . . . . . (Language) . . 65
Formatting Built-in Memory or a Memory Card . . . . . . . . . . . . . . . (Format) . . 65
Resetting the Camera to Factory Defaults . . . . . . . . . . . . . . . . . . . (Reset) . . 66
]\
Printing 67
Printing with a Computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68
]\
Using the Camera with a Computer 69
Things you can do using a computer... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Using the Camera with a Windows Computer . . . . . . . . . . . . . . . . . . . . . . . . . 69
]
Viewing and Storing Images on a Computer. . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
]
Playing Movies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Using the Camera with a Macintosh . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
]
Connecting the Camera to Your Computer and Saving Files . . . . . . . . . . . . . . . 73
]
Playing a Movie. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
5
Contents
Files and Folders . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Memory Card Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
]\
Appendix 78
Safety Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Shock resistant, Waterproof, Dustproof. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Precautions During Use. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
]
Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
]
Battery Precautions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
]
Using the Camera in another Country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94
Disposing of the Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Using a Memory Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98
Reset Initial Default Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
When things don’t go right... . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
]
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100
]
Display Messages. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104
Number of Snapshots/Movie Recording Time . . . . . . . . . . . . . . . . . . . . . . . . 106
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
6
Contents
General Guide
The numbers in parentheses indicate the pages where each item is explained.
CameraController
bp 1 234
bq
cl
cm cn co 9 bk blcpck
bo bn bm
bt
Camera
[USB] cover
1
(pages 18, 20)
USB port
2
(pages 18, 20, 70, 74)
[FREE] lever (page 13)
3
[0] (Movie) (page 40)
4
Shutter button (page 31)
5
Operation lamp
6
(pages 16, 19, 22)
Lens (page 16)
7
Microphone
8
(pages 16, 41)
Speaker
9
Reset button (page 100)
bk
5678brbs
[p] (Power) (page 24)
bl
Memory card slot
bm
(page 29)
[CARD] cover (page 29)
bn
Strap holes (page 15)
bo
Controller
[USB] cover
bp
(pages 18, 20)
[RELEASE] button
bq
(page 12)
Reset button
br
(page 100)
USB port
bs
(pages 18, 20)
Carabiner strap
bt
attachment bar
(page 15)
Strap holes (page 15)
ck
[0] (Movie) (page 40)
cl
Shutter button
cm
(page 31)
Operation lamp
cn
(pages 19, 22)
[p] (Power) (page 24)
co
Hinge unit slot
cp
(page 12)
7
Monitor Screen Contents and How to Change Them
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
. Snapshot Recording
Zoom icon (page 39)
12 3
bp
bo
bn
bm
bl
89bk
. Movie Recording
1
Snapshot capacity (number of shots)
2
4
(page 106)
Snapshot image size (page 43)
3
5
Information icon (page 9)
4
Movie quality (page 40)
5
6
Movie capacity (recording time) (page 106)
6
PLAY mode icon (pages 25, 49)
7
7
Date/Time (pages 26, 64)
8
Camera battery level indicator (page 23)
9
Controller battery level indicator (page 23)
bk
Home icon (page 33)
bl
Recording mode (page 37)
bm
White balance (page 46)
bn
Exposure compensation (page 45)
bo
Digital zoom (page 39)
bp
Movie Recording time (page 40)
1
Time set with “Max Recording Time”
2
(page 40)
12
8
. Snapshot Viewing
1 2
bm
bl
bk
9
. Movie Playback
1
Image menu icon (p
1
Information icon (page 9)
2
Snapshot image size (page 43)
3
3
Folder name/file name (page 76)
4
REC mode icon (page 25)
5
4
Date/time (pages 26, 64)
6
Camera battery level indicator (page 23)
7
Controller battery level indicator (page 23)
8
5
Home icon (page 48)
9
68 7
Exposure compensation (page 45)
bk
White balance (page 46)
bl
Highlight Score (page 55)
bm
Movie recording time (page 50)
1
“6”
Movie play ico
2
age 52)
n (page 50)
2
. Selecting Display Information (DISP)
Each touch of “DISP” will cycle through settings that display or hide on-screen
information. You can configure separate settings for the REC mode and PLAY mode.
• Display information cannot be changed during movie recording.
Off No information displayed.
Information On Shows information about image settings, etc.
Status On Shows more detailed information about settings.
9
Quick Start Basics
What you can do with your CASIO camera
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following main functions.
. Shooting
A variety of shooting styles
The camera connects to the controller using Bluetooth®
wireless technology (Bluetooth).
You can hang it from your neck, mount it on a tripod, and select
the shooting style that suits current conditions. The camera can
also be rotated 90 degrees, which means you can change the
orientation of a snapshot with little repositioning the camera.
*See page 12 for more information.
Interval Snapshot
Shoot snapshots and/or movies at fixed intervals. It’s a
great way to chronicle a day’s activities or changes
over time.
*See page 34 for more information.
ART SHOT
A variety of artistic effects help to make even common,
ordinary subjects become more novel and exciting.
*See page 37 for more information.
10
Quick Start Basics
. Viewing
. Sharing
Highlight Photo
You can configure camera settings to automatically
select snapshot highlights and generate a collage of
them each day.
*See page 53 for more information.
Highlight Movie
You can configure camera settings to automatically
select snapshot and movie highlights, and create a
movie of them each day.
*See page 54 for more information.
Wireless LAN Connection
Turns your smartphone into a camera remote
controller and allows you to select one or more
snapshot and/or movie file in camera memory and
send a copy to a smartphone.
*See page 56 for more information.
11
Quick Start Basics
Using the Attachment
You can configure the camera to suit your specific needs by attaching the hinge unit,
which enables attachment of the controller, and other included and optionally
available attachments. This way you can configure the camera to suit your specific
needs.
IMPORTANT!
• Do not apply strong pressure to the surface of the monitor screen. Doing so can
damage it.
• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign
matter on the lens can interfere with proper operation of the camera. Use a blower
or other means to keep the lens and flash window free of dirt and dust, and wipe
gently with a soft, dry cloth.
Controller
You can attach the controller to the camera and use the camera as a normal camera.
. To attach the controller
1. With the camera lens pointed in the
same direction as the controller’s
monitor screen, slide the hinge unit into
the controller’s hinge unit slot.
2. Push the hinge unit in until you hear it
click into place.
Hinge unit slot
. To detach the controller
1. While holding down the controller’s
[RELEASE] button, pull it out of the
camera.
12
[RELEASE] button
Quick Start Basics
Hinge Unit
. To use the hinge unit as a stand
. To change the shooting direction by 90 degrees
1. While pulling down on the camera’s [FREE]
lever, rotate the camera clockwise 90 degrees
until you hear a click.
• The white lines on the lens ring indicate the
horizontal orientation of the camera.
. To remove the hinge unit from the camera
1. While pulling down on the camera’s [FREE]
lever, rotate the camera counterclockwise
about 15 degrees until its operation lamp is
aligned with the A mark on the hinge unit.
White lines
A
2. Remove the hinge unit from the camera.
13
[FREE] lever
Quick Start Basics
. To attach the hinge unit to the camera
1. Align the camera’s operation lamp with
the A mark on the hinge unit.
2. Rotate the camera clockwise about
15 degrees until its operation lamp is aligned
with the B mark on the hinge unit.
Lens hood
If unwanted light is shining on the lens, rotate Lens ring
counterclockwise to detach it, and then attach a lens
hood.
Tripod nut
1. Use the tripod nut to secure a tripod to the
hinge unit.
A
Detach
B
Attach
14
Quick Start Basics
Strap
. Neck Strap
The neck strap can be attached to the camera or the controller.
1. Remove the buckles from the
strap and attach the strap to the
two strap holes on the camera
or controller.
2. Replace the buckles.
3. Use the adjusters to adjust the strap length and then fix the adjusters
on place.
Shorter
Longer
4. Pass the ends of the strap through the bands.
. Carabiner Strap
1. Pass the carabiner strap belt around
the controller’s carabiner strap
attachment bar.
2. Pass the belt through the buckle to
secure it.
15
Quick Start Basics
NOTE
• When shooting hold the camera still. Carefully press the shutter button and take
care to avoid all movement as the shutter releases and for a few moments after it
releases.
• Take care that your fingers and the strap do not cover
any of the areas indicated in the illustration.
Operation lamp
• Never swing the camera around by its strap.
• The supplied strap is intended for use with this
camera only. Never use it for any other purpose.
Microphone
Lens
16
Quick Start Basics
Using the Touch Panel
The monitor screen of the camera is a touch panel. This means you can perform the
following operations by touching the screen with your fingers.
Touch
Momentarily touching the screen with your finger.
Touch the screen to select an icon or menu item, and
to configure settings.
Flick
Holding your finger against the screen as you flick it
up, down, left, or right.
Use flick to scroll forward through images.
Spread
Holding your thumb and forefinger against the screen
as you spread them out.
Use spread to enlarge the screen image.
Squeeze
Holding your thumb and forefinger against the screen
as you bring them together.
Use squeeze to reduce the size of the screen image,
and to display multiple images.
IMPORTANT!
• Never use a pointed or hard object to perform screen operations. Doing so can
damage the screen.
NOTE
• Applying a commercially available LCD protective sheet will reduce the operation
sensitivity of the monitor screen.
17
Quick Start Basics
First, charge the battery prior to use.
The camera and the controller each have a built-in rechargeable lithium ion battery.
The batteries are not charged when you purchase the camera, so you will need to
charge both the camera and controller before using them.
You can use either of the two following methods to charge the batteries.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
While the camera and controller are turned off, connect in the sequence shown
below.
Charging time: Approximately XXX minutes
[USB] port
Micro USB cable
(included with camera)
33
[USB] cover
When plugging in the connectors, orient this marking as described below.
Camera : Towards the lens side
Controller: Towards the monitor screen side
• When disconnecting the USB-AC adaptor from the camera, be sure to disconnect
from the camera first.
1
USB-AC adaptor
(AD-C53U)
18
2
3
Power cord
Quick Start Basics
IMPORTANT!
• A battery that has not been used for a long time, or ambient temperature extremes
can cause charging to take longer than normal. If charging takes longer than about
five hours, a timer will terminate it automatically, even if the battery is not fully
charged. This is indicated by the operation lamp flashing red. If the battery has not
been used for a very long time, charging of the controller may stop after about
60 minutes or charging of the camera may stop after about 40 minutes. In both
cases, the operation lamp will flash red. In either case, disconnect the USB cable
from the camera or controller and then reconnect it to resume charging.
• Turning on the camera or controller while it is being charged with the USB-AC
adapter results in one of the conditions described below.
Camera:
The camera will start up, using power from the USB-AC adaptor as its power
supply. Charging of the camera will stop, but will resume if the camera enters the
sleep mode.
Controller:
Charging continues and the controller turns on.
• The USB-AC adaptor will become warm during charging. This is normal and does
not indicate malfunction.
• The shape of the power plug depends on each country or geographic area.
Operation lamp Operation
Lamp Status Description
Operation lamp
Lit Red
(Slowly flashing red
Charging
and orange)
Flashing Red
(Quickly flashing red
and green)
Abnormal ambient temperature, USB-AC
adaptor problem, or battery problem (page
93), or charging terminated by the timer
Off (Flashing Green) Charging complete
• The information in parentheses in the above table shows the lamp status while the
camera and controller are in the sleep mode.
The operation lamp always initially light after charging starts. Even if the battery is
already fully charged, the lamp will light momentarily.
If the lamp does not light, check the orientation of the USB cable connector.
19
Quick Start Basics
• Make sure that you insert the cable connector into the USB port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
. To charge using a USB connection to a computer
While the camera and controller are turned off, connect in the sequence shown below
).
(
1, 2
[USB] port
USB port
Computer
(power turned on)
USB
11
[USB] cover
When plugging in the connectors, orient this marking as described below.
Camera : Towards the lens side
Controller: Towards the monitor screen side
• If the camera or controller is on, hold down [p] (Power) to turn it off before
connecting it to your computer.
Charging time: Approximately XXX minutes
Micro USB cable
(included with camera)
20
2
Quick Start Basics
IMPORTANT!
• The first time you connect the camera or controller to your computer with the USB
cable, an error message may appear on your computer. If this happens, disconnect
and then reconnect the USB cable.
• A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take more than approximately five
hours, which will trigger a timer that terminates charging automatically, even if the
battery is not fully charged. If this happens, disconnect and then reconnect the
USB cable to restart charging. To complete charging faster, use of the included
USB-AC adaptor is recommended.
• If the battery has not been used for a very long time, charging of the controller may
stop after about 60 minutes or charging of the camera may stop after about
40 minutes. In both cases, the operation lamp will flash red. In either case, use of
the USB-AC adaptor that comes with the camera is recommended.
• Turning on the camera or controller while it is being charged by a computer results
in one of the conditions described below. Though charging normally should
continue, certain types of computers or connection environments may stop
charging if supply power is low. This will be indicated by the camera’s operation
lamp lighting green.
Camera:
Charging continues, and a USB connection will be established between computer
and camera.
Controller:
Charging continues and the controller turns on.
• Charging is not performed while the connected computer is in the hibernate mode.
21
Quick Start Basics
Operation lamp Operation
Lamp Status Description
Operation lamp
Lit Red, (Lit Amber) Charging
Flashing Red
(Quickly flashing red
and green)
Abnormal ambient temperature,
charging taking abnormally long, or
battery problem (page 93)
Off, (Lit Green) Charging complete
• The information in parentheses in the above table shows the
lamp status while the camera and controller are turned on during charging.
Other Charging Precautions
• With the two charging methods described above, you can charge the batteries.
Never use any other type of charger device. Attempting to use a different charger
can result in unexpected accident.
• This model can be charged only via from USB 2.0 specification USB port only.
• USB charging devices and power supply devices are subject to fixed standards.
Use of an inferior device or a device that is not up to standard can cause
malfunction and/or failure of your camera.
• Operation is not guaranteed in the case of a computer built or modified by you.
Even in the case of a commercially available computer, certain USB port
specifications may make it impossible to charge via the USB cable.
• A battery that is still warm immediately after normal use may not charge fully. Give
the battery time to cool before charging it.
• A battery discharges slightly while it is loaded in the camera or controller. Because
of this, it is recommended that you charge the battery immediately before you need
to use it.
• Charging the battery may cause interference with TV and radio reception. If this
happens, plug the USB-AC adaptor into an outlet that is further away from the TV
or radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
• Never use the power cord with another device.
• Use only the USB-AC adaptor and USB cable specified in this manual for charging.
Use of any other type of devices may result in improper charging.
22
Quick Start Basics
Checking the Current Battery Level
As battery power is consumed, a battery indicator on the monitor screen indicates its
current level as shown below.
Level High Low
Battery
Indicator
Camera ***
Controller ***
Indicator Color White * White * Red * Red
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about 30 days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
64).
• See page 109 for information about battery life and number of shots.
23
Quick Start Basics
Turning Power On and Off
. To turn off power
Camera
Press [p] (Power).
Controller
Press [p] (Power).
[p] (Power)
Operation lamp
Operation lamp
[p] (Power)
• Turning on the camera causes the camera and controller operation lamps to light
green, and automatically starts an operation to establish a Bluetooth wireless
technology connection between the camera and controller. An image appears on
the controller and shooting is enabled.
• If you press [p] (Power) on the controller or if you do not perform any controller
operation for about 30 seconds while there is a Bluetooth wireless technology
connection between the camera and controller, the controller image will go blank,
and the camera and controller will enter a sleep mode. The operation lamp slowly
flashes green while the camera is in the sleep mode. To restore the controller
display, press the controller button. The Bluetooth wireless technology connection
between the camera and controller is maintained even while they are in the sleep
mode, so they can quickly recover when you press a button.
• The connection between the camera and controller is affected by their orientation
and by the distance between them.
• The controller operation lamp will flash green when the connection is poor. Camera
response may be slow if you perform an operation on the controller while
communication conditions are bad. If this happens, try adjusting the orientation and
the distance between the camera and controller.
• If the distance between the camera and controller becomes to great or if
communication conditions become bad while the camera is in the sleep mode, the
connection may be dropped between them.
24
Quick Start Basics
Toggling Between the REC Mode and PLAY Mode
Touch the icon in the lower right corner of the screen or flick the screen upwards or
downwards to toggle between the REC mode and PLAY mode.
REC mode PLAY mode
“ ” (PLAY)
“”(REC)
NOTE
• If “ ” (PLAY) and/or “ ” (REC) is not displayed, touch “ ”.
. To turn off power
On the camera or the controller, hold down [p] (Power).
• Turning off the camera will cause the controller to turn off automatically after about
5 minutes.
25
Quick Start Basics
Camera-Controller Wireless Connection (Bluetooth)
The camera and controller communicate over a
Bluetooth wireless technology connection. Once
you perform the “pairing” operation required for
Bluetooth wireless technology connection, the
camera and controller will automatically connect to each other whenever you turn
them on. Note that the connection will be lost of the distance between the camera and
controller becomes too great or if a wireless LAN connection is established between
the camera and a smartphone. The controller will turn off after a preset amount of
time after the Bluetooth wireless technology connection is lost. The camera will
remain on, so you can shoot images by pressing its shutter button.
IMPORTANT!
• Your camera has Bluetooth wireless technology communication functionality built
in. Avoid operating the camera (including camera standalone operations) inside of
aircraft or anywhere else where wireless data communication is restricted.
Configuring Basic Settings the First Time You Turn On the Camera
The first time you turn on the camera, a screen appears for configuring the display
language, date, and time settings. Failure to set the date and time correctly will cause
the wrong date and time data to be recorded with images.
IMPORTANT!
• Camera models sold in certain geographic areas may not support display language
selection.
1. Turn on the camera and controller (page 24).
• If this is the first time you are turning on power,
the message “Make sure the camera is turned on”
will appear on the controller monitor screen for a
short while. Wait for a few moments until the
message disappears. If the message does not
disappear, check to make sure that the camera is
turned on.
12/24 hour switch icon
2. Flick (page 17) the controller screen upwards
and downwards or touch “ ”, “ ” until
you find the language you want, and then
touch to select it.
26
Quick Start Basics
3. Touch the date display format you want.
Example: July 10, 2015
YY/MM/DD
DD/MM/YY
MM/DD/YY
* 15/7/10
* 10/7/15
* 7/10/15
4. Set the date and the time.
• Touch the value you want to change (year, month, day, hour, minute) and then
touch “ ”, “ ” to change it.
• To switch between 12-hour and 24-hour format, select “am (pm)”/“24h” and
then touch “ ”, “ ” to change the setting.
5. When the date and time settings are the way you want, touch “Apply”.
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
– Display language: Page 65
– Date and time: Page 64
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
27
Quick Start Basics
Preparing a Memory Card
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
• For information about memory card capacities, see page 106.
Supported Memory Cards
– microSD Memory Card
– microSDHC Memory Card
– microSDXC Memory Card
• The above are supported memory card types as of June 2014.
• This camera supports use of microSD memory cards of the
following types and capacities: microSD memory cards up to 2GB, microSDHC
memory cards from 2GB up to 32GB, microSDXC memory cards from 32GB up to
2TB. Note that the ability to use any particular card with this camera, even if it
satisfies the above capacity and type requirements, is not guaranteed.
Warning!
*
0 Memory cards are small and present a risk of accidentally being swallowed
by infants and young children. Keep memory cards out of the reach of
infants and young children. If a memory card is ever swallowed accidentally,
contact a physician immediately.
+
28
Quick Start Basics
To load a memory card
1. Holding down camera’s [p]
(Power) to turn off the camera and
then open the [CARD] cover.
2. Load a memory card.
Positioning the memory card so its back
is facing upwards (towards the lens side
of the camera), slide it into the card slot
all the way in until you hear it click
securely into place.
3. Close the [CARD] cover.
Back
Front Back
IMPORTANT!
• Never insert anything besides a supported memory card (page 28) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, and contact your retailer or nearest CASIO authorized service center.
. To replace the memory card
Press the memory card and then release it.
This will cause it to pop out of the memory
card slot slightly. Pull the card out the rest of
the way and then insert another one.
• Never remove a card from the camera
while the operation lamp is flashing green.
Doing so can cause the image save
operation to fail and even damage the
memory card.
29
Quick Start Basics
To format (initialize) a new memory card
Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
1. Load a memory card (page 29).
2. Turn on the camera and controller (page 24).
3. Touch the “ ” (Home) icon.
4. Touch “MENU”.
5. Flick upwards and downwards until you find “Setup”, and then touch it.
6. Flick upwards and downwards until you find “Format”, and then touch
it.
7. Touch “Format” and then touch “Yes”.
This starts the memory card format operation.
30
Quick Start Basics
Loading...