Casio PRW-2500T-7ER Instruction manual

1578892

PRW-2500T-7ER

Specifications

 Radio Controlled
 Tough Solar
 200M WR
 Mineral Glass
 5 Alarms
 Stopwatch
 World Time
 Full Auto Light
 Compass
 Barometer
 Altimeter
 Duplex LCD

Radio Controlled

World Time

Stop Watch

5 Daily Alarms

Digital Compass

A built-in radio signal receiver ensures that
the exact time is displayed across the UK,
Europe, America, Japan and China.

Displays the current time in major cities and
specific areas

Elapsed time, split time and final time are
measured with 1/100-sec accuracy.

The daily alarm reminds you about recurring
events with an acoustic signal at the time
you have set. You can also activate hourly
time signals (each hour). This model has 5
independent alarms.

A built-in direction sensor detects the mag­netic north.

Sensors

Rotating
Bezel

Auto Light
Indicator

Battery level
Indica-

Model variations may differ in appearance from the example above.

Moon Graph

Tide Graph

B

Alarm
Indicators

E

Variance
Indicators

C

A

To set home time, press button C until the time and day are displayed. Press and
hold button A until the LCD starts to flash. Press button C to scroll through the fields
correcting each with button D as you go. Once all field are corrected, press button A
to exit setting mode.

Press button C until display shows WT. Scroll through the pre-set cities using button

D.

Press button C until display shows stopwatch function (STW) Start and stop the stop
watch using button D.

Press button C until you reach alarm mode (AL) Choose which of the 5 alarms to set
using button D. Once chosen, press and hold button A to unlock the setting function.
Press C to chose whether to set the hours or the minutes etc, and set that section
with button D. Press button A to lock your settings and then again to turn the alarm
on or off.

In timekeeping mode, press button B. Point the 12 o’clock position of the watch in
the direction you want to measure and the digital compass will indicate that direc­tion while showing North on the dual LCD.

D

F

Altimeter

Barometer/

Tide/Moon
Graphs

Duplex LCD

Rotating Bezel
Full Auto Light

Mineral Glass
Water Resistant 200m

A pressure sensor detects changes in the air
pressure and converts the result into an
altitude up to 10,000 m.

Temperature and air pressure measurement
which monitors changing weather patterns.

The phase of the moon and tidal movements
are shown on the display based on your
current location.

In timekeeping mode, press button D. This will then display the current height above
sea level in units of 5 metres.

In timekeeping mode press button E. The current air pressure will be displayed as a
graph and as a measurement along with the current temperature.

Ensure correct longitude and latitude interval are used when setting watch, then
face of watch will show correct values.

Elements on the display are distinguished from one another using colour. This is achieved using different coloured
layers placed on top of one another, allowing information to be displayed more clearly.

The watch bezel is marked with compass points and can be rotated to assist in navigation.

In low light levels, an LED automatically illuminates the watch face each time the watch is tilted 40 degrees. Light can
also be accessed with button F.

Artificially manufactured glass with improved level of hardness and scratch resistance

Perfect for swimming and snorkelling.