Projector Wired LAN
Version 4.01
Keep this manual in a safe place future reference.
•PJLink is a pending trademark or a registered trademark in Japan, the United States, and other countries and areas.
•Crestron and Crestron RoomView are registered trademarks of Crestron Electronics, Inc. of the United States.
•Crestron Connected is a trademark of Crestron Electronics, Inc. of the United States.
•Other company and product names may be registered product names or trademarks of their respective owners.
•The contents of this manual are subject to change without notice.
•This manual is published under strict quality control standards. Should you notice any errors or other problems, please feel free to contact us about them.
•Copying of this manual, either in part or its entirety is forbidden. You are allowed to use these instructions for your own personal use. Any other use is forbidden without the permission of CASIO COMPUTER CO., LTD.
•CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third parties arising out of the use of this product or this manual.
•CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of data due to malfunction or maintenance of this product, or due to any other reason.
•The sample screens shown in this manual are for illustrative purposes only, and may not be exactly the same as the screens actually produced by the product.
•Unless specifically stated otherwise, all illustrations in this manual show the XJ-F211WN projector.
1
XJ-F21XN, XJ-F211WN, XJ-UT312WN, XJ-UT352WN, XJ-S400UN, XJ-S400WN projector (hereinafter referred to collectively as "the Projector" or "this Projector") can be controlled from an external device via its LAN port.
Connection
Use a LAN cable to connect the Projector to a network device with which you want to establish a wired LAN connection. For details about how to connect, see "Establishing a Network Connection Between the Projector and a Computer" in your projector's user's guide (Network Function Guide).
Connection between the Projector and a network device via a router
Supported Devices and Standards
Web Browser
This Projector supports control using a computer web browser.
For details about connection, see "Projector Remote" in your Projector's user's guide (Network Function Guide).
PJLink
This Projector supports the PJLink Class1 standard formulated by the Japan Business Machine and Information System Industries Association (JBMIA).
For detailed information about PJLink, visit the website below. URL: https://pjlink.jbmia.or.jp/english
2