Casio MA1102-EA User Manual

MA1102-EA

Operation Guide 5228

Your watch may differ somewhat from the one shown in the •
illustration.

Notes

Some water resistant models are equipped •
with a screw lock crown.
With such models, you must unscrew the •
crown in the direction noted in the illustration
to loosen it before you can pull it out. Do not
pull too forcibly on such crowns.
Also note that such watches are not water •
resistant while their crowns are loosened. Be
sure to screw the crowns back in as far as
they will go after making any setting.

Setting the Time and Day

Crown (Normal position)

Day of the week

To set the day

Pull the crown out to Click 1.1.
Rotate the crown to set the day. 2.
Avoid changing the day setting between 9:00 p.m. and
1:00 a.m. (If you do, the day indication may not change at
midnight).
Push the crown back in to the normal position.3.

To set the day of the week and time

Pull the crown out to Click 2 when the second hand is at 1.
12 o’clock. The second hand will stop.
Set the hands by rotating the crown. As you do, the day of the 2.
week changes accordingly.
After setting the day of the week, rotate the crown to set the 3.
time. Make sure to distinguish between AM and PM.
On a time signal, push the crown back in to the normal 4.
position.

For watch with the elapsed time bezel

■

Rotate the elapsed time bezel to align the
mark with the minute hand.
After certain amount of time elapsed, read the
graduation on the elapsed time bezel which the
minute hand points to.
The elapsed time is indicated.

Day

Click 1
(Day setting)

Click 2
(Time and day of
week setting)

Elapsed time bezel

Specifications

Module No.

5228 ±20 seconds per month SR916SW Approx. 3 years

Accuracy at normal

temperature

Battery type Battery life

1