Casio HA-D95HB User Manual

Hand Belt (HA-D95HB) Instruction

After reading this instruction, keep it in a safe place for future reference.

This instruction shows how to attach the Hand Belt on the IT-600.

Items Included

• Hand Belt

• Strap

• Screws (3)

Attaching the Hand Belt

Attach the hand belt as described below.

1 Turn the IT-600 over. 2 Attach the hand belt on the back of the IT-600 and

fasten the enclosed screws (3pcs).

4 Feed the hand belt through the strap, fold it back and

secure it with the Velcro fastener. Adjust the belt to a

comfortable length.

5 You can also use the strap to hold the stylus when

required, as shown in the figure.

3 Attach the strap using the strap hole in the bottom of

the IT-600.

Note on Using the Hand Belt

••

•

Before loading the IT-600 with the hand belt attached

••

onto cradle, loosen the belt as shown in the figure

so that it does not get caught between the IT-600 and

the cradle.