Casio GA-100-1A4ER Instruction manual

2328852

GA-100

Specifications

 Mineral Glass
 Tough Solar
 200M WR
 Magnetic Resistance
 5 Alarms
 Stopwatch
 World Time
 Auto LED Light

World Time

Displays the current time in major cities and
specific areas

Alarm Indicators

A

Auto Light Indicator

C

Model variations may differ in appearance from the example above.

Speed Indicator

B

D

Press button C until display shows WT. Scroll through the pre-set cities using
button D. The Local time will be displayed for each city on the LCD.

Home and world time zones can be easily swapped by pressing buttons A and

B simultaneously in this mode.

Stop Watch

Countdown Timer

5 Daily Alarms

Auto Light

Magnetic Resistance
Lap Timing

Mineral Glass

Elapsed time, split time and final time are meas­ured with 1/1000-sec accuracy. The watch can
measure times of up to 24 hrs.

A stopwatch that counts backwards: When 0
minutes, 0 seconds is reached, the timer emits a
10-second signal tone.

The daily alarm reminds you about recurring
events with an acoustic signal at the time you
have set. You can also activate hourly time sig­nals (each hour). This model has 5 independent
alarms.

The back light automatically illuminates the watch face each time the watch is tilted 40 degrees. Activate this feature
by pressing and holding button B until the A-light indicator turns on.

The housing is designed to shield the clock from magnetic fields.

The lap time reading will show elapsed time since the last lap reading was taken. Perfect for track racing or training.

Artificially manufactured glass with improved level of hardness and scratch resistance.

Press button C until you reach STW mode. Start and stop stopwatch using
button D, reset stopwatch using button A.

Press button C until TMR is displayed. Press and hold button A to unlock the
watch, Press C to scroll through Hours, minutes and seconds, using button D
to alter where required. Lock your settings with button A then start/ stop the
timer with button D. When stopped the timer can be reset with button A.

Press button C until the digital displays shows ALM. Choose which of the 5
alarms to set using button D. Once chosen, press and hold button A to unlock
the setting function. Press C to chose whether to set the hours or the minutes,
and set that section with button D. Press button A lock your settings and then
use button A again to turn alarm on or off.

Water resistant 200m

Perfect for free diving without scuba equipment.

Technical Enquiry/ Seng Assistance: 020 8450 9131 email: [e-mail]