Casio EX-Z50 User Manual

Digital Camera

EX-Z50

User’s Guide

Thank you for purchasing this CASIO product.

• Before using it, be sure to read the precautions contained in this User’s Guide.

• Keep the User’s Guide in a safe place for future reference.

• For the most up-to-date information about this product, visit the official EXILIM Website at http://www.exilim.com/.

K879PCM1DKX

INTRODUCTION

Unpacking

Check to make sure that all of the items shown below are included with your camera. If something is missing, contact your dealer as soon as possible.

Camera

CD-ROM

Rechargeable Lithium Ion Battery

(NP-40)

USB Cable Basic Reference

USB Cradle

(CA-24)

• Note that the shape of the AC adaptor depends on the area where you purchased the camera.

○○○○○○○

Special AC Adaptor (Plug-in Type)

Special AC Adaptor (Inlet Type)

(AD-C51G)

* The shape of the AC

power cord plug varies according to country or geographic area.

AC Power Cord

Strap

(AD-C51J)

INTRODUCTION

2 INTRODUCTION

Unpacking .................................................................... 2

Features ....................................................................... 9

Precautions ................................................................ 12

16 QUICK START GUIDE

First, charge the battery! ............................................ 16

To configure display language and clock settings ..... 17

To record an image .................................................... 18

To view a recorded image .......................................... 19

To delete an image ..................................................... 19

20 GETTING READY

About This Manual ..................................................... 20

General Guide ............................................................ 21

Camera 21 USB Cradle 23

Monitor Screen Contents ........................................... 24

Changing the Contents of the Monitor Screen 26

Attaching the Strap .................................................... 28

Power Requirements .................................................. 29

Loading and Removing the Rechargeable Battery 29 To charge the battery 31 Power Supply Precautions 36 Turning the Camera On and Off 39 Configuring Power Saving Settings 41

Using the On-screen Menus ...................................... 42

Configuring Display Language and Clock Settings ... 44

To configure display language and clock settings 45

INTRODUCTION

48 BASIC IMAGE RECORDING

Recording an Image ................................................... 48

Specifying the Recording Mode 48 Aiming the Camera 49 Recording an Image 50

Using the Optical Viewfinder...................................... 54

Using Zoom ................................................................ 55

Optical Zoom 55 Digital Zoom 57

Using the Flash .......................................................... 59

Flash Unit Status 60 Changing the Flash Intensity Setting 61 Using Flash Assist 61

Using the Self-timer ................................................... 63

Specifying Image Size ............................................... 65

Specifying Image Quality ........................................... 66

68 OTHER RECORDING FUNCTIONS

Selecting the Focus Mode ......................................... 68

Using Auto Focus 69 Using the Macro Mode 71 Using Pan Focus 72 Using the Infinity Mode 73 Using Manual Focus 74 Using Focus Lock 75

Exposure Compensation (EV Shift) ........................... 76

Adjusting White Balance ............................................ 78

Configuring the White Balance Setting Manually 79

Using the BESTSHOT Mode ..................................... 81

Creating Your Own BESTSHOT Setup 83 To delete a BESTSHOT user setup 84

Combining Shots of Two People into

a Single Image (Coupling Shot) ................................. 85

Recording a Subject onto an Existing

Background Image (Pre-shot) .................................... 87

Recording Images of Business Cards and

Documents (Business Shot) ...................................... 89

To use Business Shot 90

Using the Movie Mode ............................................... 91

Recording Audio ......................................................... 94

Adding Audio to a Snapshot 94 Recording Your Voice 95

Using the Histogram ................................................... 97

REC Mode Camera Settings...................................... 99

Specifying ISO Sensitivity 100 Specifying Outline Sharpness 101 Specifying Color Saturation 101 Specifying Contrast 102 Turning the On-screen Grid On and Off 102 Turning Image Review On and Off 103 Using Icon Help 103 Assigning Functions to the [왗] and [왘] Keys 104 Specifying Power On Default Settings 105 Resetting the Camera 107

INTRODUCTION

108 PLAYBACK

Basic Playback Operation ........................................ 108

Playing an Audio Snapshot 109

Flipping the Display .................................................. 110

Zooming the Display Image ..................................... 111

Resizing an Image ................................................... 112

Cropping an Image................................................... 113

Playing a Movie ........................................................ 114

Displaying the 9-image View .................................... 115

Displaying the Calendar Screen .............................. 116

Playing a Slideshow ................................................. 117

Using the Photo Stand Feature 119

Rotating the Display Image ...................................... 120

Using Image Roulette .............................................. 121

Adding Audio to a Snapshot .................................... 122

To re-record audio 123

Playing Back a Voice Recording File ....................... 124

125 DELETING FILES

Deleting a Single File ............................................... 125

Deleting All Files ...................................................... 126

127 FILE MANAGEMENT

Folders ...................................................................... 127

Memory Folders and Files 127

Protecting Files ........................................................ 128

To protect a single file 128 To protect all files in memory 129

Using the FAVORITE Folder .................................... 129

To copy a file to the FAVORITE folder 129 To display a file in the FAVORITE folder 131 To delete a file from the FAVORITE folder 132 To delete all files from the FAVORITE folder 132

133 OTHER SETTINGS

Configuring Sound Settings ..................................... 133

To configure sound settings 133 To set the volume level 134

Specifying an Image for the Startup Screen ........... 134

Configuring Power Down Image Settings ................ 135

Specifying the File Name Serial Number

Generation Method .................................................. 137

Using the Alarm ....................................................... 137

Setting the Clock ...................................................... 139

To select your Home Time zone 139 To set the current time and date 140 Changing the Date Format 140

INTRODUCTION

Using World Time ..................................................... 141

To display the World Time screen 141 To configure World Time settings 141

Changing the Display Language.............................. 142

Changing the USB Port Protocol ............................. 143

Configuring [ ] (REC) and [ ] (PLAY)

Power On/Off Functions ........................................... 144

Formatting Built-in Memory ...................................... 145

146 USING A MEMORY CARD

Using a Memory Card .............................................. 147

To insert a memory card into the camera 147 To remove a memory card from the camera 148 Formatting a Memory Card 148

Copying Files............................................................ 150

To copy all the files in built-in memory to a

memory card 150

To copy a specific file from a memory card to built-in

memory 151

152 PRINTING IMAGES

DPOF ........................................................................ 153

To configure print settings for a single image 154 To configure print settings for all images 155

Using PictBridge or USB DIRECT-PRINT ............... 156

PRINT Image Matching III ............................................ 159

Exif Print ................................................................... 159

160 VIEWING IMAGES ON A COMPUTER

Using the Camera with a Windows Computer......... 160

Using the Camera with a Macintosh Computer ....... 166

Operations You Can Perform from Your Computer ....

Using a Memory Card to Transfer Images to a

Computer .................................................................. 171

Memory Data ............................................................ 172

DCF Protocol 172 Memory Folder Structure 172 Image Files Supported by the Camera 174

170

INTRODUCTION

175 USING THE CAMERA WITH A COMPUTER

Using the Album Feature ......................................... 175

Creating an album 175 Selecting an Album Layout 177 Configuring Detailed Album Settings 177 Viewing Album Files 180 Saving an Album 182 To delete an album 183

Installing the Software from the CD-ROM ............... 183

About the bundled CD-ROM (CASIO Digital Camera

Software) 183

Computer System Requirements 185

Installing Software from the CD-ROM in Windows ...

Getting Started 187 Selecting a Language 187 Viewing the Contents of the “Read me” File 187 Installing an Application 188 Viewing User Documentation (PDF Files) 188 User Registration 189 Exiting the Menu Application 189

Installing Software from the

CD-ROM on a Macintosh ......................................... 189

Installing Software 189 Viewing User Documentation (PDF Files) 190

186

192 APPENDIX

Menu Reference ....................................................... 192

Indicator Lamp Reference ........................................ 195

Troubleshooting Guide ............................................. 198

If you have problems installing the USB driver... 201 Display Messages 202

Specifications ........................................................... 204

INTRODUCTION

IMPORTANT!

• The contents of this manual are subject to change without notice.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss resulting from the use of this manual.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any loss or claims by third parties which may arise through the use of the EX-Z50.

• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or losses suffered by you or any third party due to the use of Photo Loader and/or Photohands.

• CASIO COMPUTER CO., LTD. assumes no responsibility for any damage or loss caused by deletion of data as a result of malfunction, repairs, or battery replacement. Be sure to back up all important data on other media to protect against its loss.

• Note that the example screens and product illustrations shown in this User’s Guide may differ somewhat by the screens and configuration of the actual camera.

• The SD logo is a registered trademark.

• Windows, Internet Explorer, and DirectX are registered trademarks of Microsoft Corporation.

• Macintosh is a registered trademark of Apple Computer, Inc.

•

MultiMediaCard is a trademark of Infineon Technologies AG of Germany, and licensed to the MultiMediaCard Association (MMCA).

• Adobe and Reader are either registered trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries.

• Other company, product and service names used herein may also be trademarks or service marks of others.

• Photo Loader and Photohands are the property of CASIO COMPUTER CO., LTD. Except as stipulated above, all copyrights and other related rights to these applications revert to CASIO COMPUTER CO., LTD.

INTRODUCTION

■ Copyright Restrictions

Except for the purposes of your own personal enjoyment, unauthorized copying of snapshot files, movie files, and audio files violates copyright laws and international contracts. Distribution to third parties of such files over the Internet without permission of the copyright holder, whether for profit or for free, violates copyright laws and international contracts.

Features

• 5 million effective pixels The CCD provides 5.25 million total pixels of very highresolution for crisp, clear, prints and display images.

• 2.0-inch TFT color LCD monitor screen

• Long battery life A low-power design combines with a large-capacity battery to provide more recording and playback between charges.

• 12X zoom (page 55) 3X optical zoom, 4X digital zoom

• 9.3MB flash memory Images can be recorded without using a memory card.

• REC mode or PLAY mode power up (page 39) Press [ ] (REC) or [ ] (PLAY) to turn on the camera and enter the mode you want to use.

• Multi Auto Focus (page 70) When “Multi” is selected for the Auto Focus area, the camera takes simultaneous meter readings at seven different points and automatically selects the best one.

• Pan Focus (page 72) This feature lets you lock the focus point.

INTRODUCTION

• Auto Pan Focus (page 69) When you press the shutter button all the way down without pausing, the camera immediately records the image without waiting for Auto Focus to be performed. This helps to avoid missing a special moment while you wait for the camera to Auto Focus.

• Support for SD memory cards and MMC (MultiMedia Cards) for memory expansion (page 146)

• Bundled with a USB Cradle (pages 31, 119, 156, 160) The bundled USB cradle can be used to charge the camera’s battery, and to transfer images to a computer. A Photo Stand feature lets you view images while the camera is on the cradle.

• BESTSHOT (page 81) Simply select the sample scene that matches the type of image you are trying to record and the camera performs troublesome setups automatically for beautiful pictures every time.

• Business Shot (page 89) Business Shot automatically corrects rectangular shapes when recording the image of a business card, document, whiteboard, or similar subjects from an angle.

• Coupling Shot and Pre-shot (pages 85, 87) Coupling Shot lets you combine two subjects into a single image, while Pre-shot lets you add a subject to a previously recorded background image. This means you can create images that include you and your friend, even if you are the only two people around.

• Triple Self-timer (page 63) The self-timer can be set up to repeat three times, automatically.

• Real-time histogram (page 97) An on-screen histogram lets you adjust exposure as you view the effect on overall image brightness.

• World Time (page 141) A simple operation sets the current time for your current location. You can select from among 162 cities in 32 time zones.

• Alarm (page 137) A built-in alarm helps to keep you on time for important events, and even can be used in place of an alarm clock. You can also have a specific image appear, or a movie or audio file to play when the alarm time is reached.

INTRODUCTION

• Album Function (page 175) HTML files are generated automatically to create an album of recorded images. Album contents can be viewed and printed using a standard Web browser. Images can also be incorporated into Web pages quickly and easily.

• Calendar screen (page 116) A simple operation displays a full-month calendar on the camera’s monitor screen. Each day of the full-month calendar shows a thumbnail of the first image recorded for that date, which helps to make searching for a particular image quicker and easier.

• Audio Snapshot Mode (page 94) Use this mode to record snapshots that also include audio.

• Movie + Audio Mode (page 91)

• Voice Recording (page 95) Quick and easy recording of voice input.

• After Recording (page 122) Use this mode to add audio to snapshots after you record them.

• Selectable Sound Settings (page 133) You can configure different sounds to play whenever you turn on the camera, press the shutter button half-way or all the way, or perform a key operation.

• DCF Data Storage (page 172) DCF (Design rule for Camera File system) data storage protocol provides image compatibility between the digital camera and printers.

• Digital Print Order Format (DPOF) (page 153) Images can be printed easily in the sequence you want using a DPOF compatible printer. DPOF can also be used when specifying images and quantities for printing by professional print services.

• PRINT Image Matching Images include PRINT Image Matching setting and other camera setup information). A printer that supports PRINT Image Matching adjusts the printed image accordingly, so your images come out just the way you intended when you recorded them.

III

Compatible (page 159)

III

reads this data and

data (mode

INTRODUCTION

• USB DIRECT-PRINT and PictBridge support (page 156) Connect directly to a USB DIRECT-PRINT or PictBridge compatible printer and you can print images without going through a computer.

• Bundled with Photo Loader and Photohands (page 184) Your camera comes bundled with Photo Loader, the popular application that automatically loads images from your camera to your PC. It also comes with Photohands, and application that makes image retouching quick and easy.

Precautions

■ General Precautions

Be sure to observe the following important precautions whenever using the EX-Z50.

All references in this manual to “camera” refer to the CASIO EX-Z50 Digital Camera.

• Never try to take pictures or use the built-in display while operating a motor vehicle or while walking. Doing so creates the risk of serious accident.

• Never try to open the case of the camera or attempt your own repairs. High-voltage internal components create the risk of electric shock when exposed. Always leave maintenance and repair work up to a CASIO authorized service center.

• Never look at the sun or any other bright light through the camera’s viewfinder. Doing so can damage your eyesight.

• Keep the small parts and accessories of this camera out of the reach of small children. If swallowed accidentally, contact your physician immediately.

• Never fire the flash in the direction of a person operating a motor vehicle. Doing so can interfere with the driver’s vision and create the risk of accident.

INTRODUCTION

• Never fire the flash while it is too close to the subject’s eyes. Intense light from the flash can cause eye damage if it is fired too close to the eyes. This is especially true with young children. When using the flash, the camera should be at least one meter (3.3´) from the eyes of the subject.

• Keep the camera away from water and other liquids, and never let it get wet. Moisture creates the risk of fire and electric shock. Never use the camera outdoors in the rain or snow, at the seashore or beach, in the bathroom, etc.

• Should foreign matter or water ever get into the camera, immediately turn it off. Next, remove the camera’s battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the risk of fire and electric shock.

• Should you ever notice smoke or a strange odor coming out of the camera, immediately turn it off. Next, taking care you do not burn your fingers, remove the camera’s battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center. Using the camera under these conditions creates the risk of fire and electric shock. After making sure there is no more smoke coming from the camera, take it to your nearest CASIO authorized service center for repair. Never attempt your own maintenance.

• Never use the AC adaptor to power any other device besides this camera. Never use any other AC adaptor besides the one that comes with this camera.

• Never cover the AC adaptor with a quilt, blanket, or other cover while it is in use, and do not use it near a heater.

• At least once a year, unplug the AC adaptor power cord from the power outlet and clean the area around the prongs of the plug. Dust build up around the prongs can create the risk of fire.

• If the camera’s case should ever become cracked due to dropping it or otherwise subjecting it to rough treatment, immediately turn it off. Next, remove the camera’s battery and/or unplug the AC adaptor power cord from the power outlet, and contact your dealer or nearest CASIO authorized service center.

• Never use the camera inside of an aircraft or in any other area where its use is prohibited. Doing so creates the risk of accident.

• Physical damage and malfunction of this camera can cause the data stored in its memory to be deleted. Always keep backup copies of data by transferring them to personal computer memory.

• Never open the battery cover, disconnect the AC adaptor from the camera, or unplug the AC adaptor from the wall socket while an image is being recorded. Doing so will not only make storage of the current image impossible, it can also corrupt other image data already stored in file memory.

INTRODUCTION

■ Test for proper operation before using the camera!

Before using the camera to record important images, make sure you first record a number of test images and check the results to ensure that the camera is configured correctly and operating properly (page 16).

■ Data Error Precautions

• Your digital camera is manufactured using precision

digital components. Any of the following creates the risk of corruption of data in file memory.

— Removing the battery or memory card, or setting the

camera onto the USB cradle while the camera is performing a record or memory access operation

— Removing the battery, removing the memory card, or

placing the camera onto the USB cradle while the green operation lamp is still flashing after you turn off the camera

— Disconnecting the USB cable, removing the camera

from the USB cradle, or disconnecting the AC adaptor from the USB cradle while a data communication

operation is being performed — Low battery power — Other abnormal operations

Any of the above conditions can cause an error message to appear on the monitor screen (page 202). Follow the instructions provided by the message to eliminate the cause of the error.

■ Operating conditions

• This camera is designed for use in temperatures ranging from 0°C to 40°C (32°F to 104°F).

• Do not use or keep the camera in the following areas.

— In areas subject to direct sunlight — In areas subject to high humidity or dust — Near air conditioners, heaters, or other areas subject

to temperature extremes

— Inside of a closed vehicle, especially one parked in the

sun

— In areas subject to strong vibration

INTRODUCTION

■ Condensation

• When you bring the camera indoors on a cold day or otherwise expose it to a sudden change of temperature, there is the possibility that condensation can form on the exterior or on interior components. Condensation can cause malfunction of the camera, so you should avoid exposing it to conditions that might cause condensation.

• To keep condensation from forming, place the camera into a plastic bag before moving it into a location that is much warmer or colder than your current location. Leave it in the plastic bag until the air inside the bag has a chance to reach the same temperature as the new location. If condensation does form, remove the battery from the camera and leave the battery cover open for a few hours.

■ Lens

• Never apply too much force when cleaning the surface of the lens. Doing so can scratch the lens surface and cause malfunction.

• Fingerprints, dust, or any other soiling of the lens can interfere with proper image recording. Never touch the lens with your fingers. You can remove dust particles from the lens surface by using a lens blower to blow them off. Next, wipe the surface of the lens with a soft lens cloth.

■ Other

• The camera may become slightly warm during use. This does not indicate malfunction.

• If the exterior of the camera needs cleaning, wipe it with a soft, dry cloth.

QUICK START GUIDE

First, charge the battery!

Load the battery into the camera (page 29).

Stopper

Place the camera onto the USB cradle to charge the battery (page 31).

• Note that the shape of the AC adaptor depends on the area where you purchased the camera.

• It takes about 190 minutes to achieve a full charge.

1 Inlet Type

○○○○○○○○○○○○○○○○

1 Plug-in Type

[CHARGE] lamp Charging: Lights red Charging Complete: Lights green

QUICK START GUIDE

To configure display language and clock settings

• Be sure to configure the following settings before using the camera to record images. See page 44 for details.

2, 3, 4, 5, 6, 7, 8, 9

Press the power button to turn on the camera.

Press [왖] to select the language you want.

Press [SET] to register the language setting.

Use [왖], [왔], [왗], and [왘] to select the geographical area you want, and then press [SET].

Use [왖] and [왔] to select the city you want, and then press [SET].

Use [왖] and [왔] to select the summer time (DST) setting you want, and then press [SET].

Use [왖] and [왔] to select the date format setting you want, and then press [SET].

Set the date and the time.

Press [SET] to register the clock settings and exit the setting screen.

QUICK START GUIDE

1200

1600

NORMAL

04/1212

1 / 1000

F2.6

To record an image

Green operation lamp

Snapshot mode icon

Focus frame

Press [ ] (REC).

Press [MENU].

See page 48 for details.

2 3,4,5

1200

1600

NORMAL

1 / 1000

F2.6

04/

/24 :

○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○

Use [왗] and [왘] to select the “REC” tab.

Use [왖] and [왔] to select “REC Mode”, and then press [왘].

Use [왖] and [왔] to select “ Snapshot”, and then press [SET].

• This causes “ ” (Snapshot mode) to appear on the monitor screen.

Point the camera at the subject, use the monitor screen or viewfinder to compose the image, and then press the shutter button half way.

• When proper focus is achieved, the focus frame turns green and the green operation lamp lights.

Holding the camera still, gently press the shutter button all the way down.

QUICK START GUIDE

To view a recorded image

See page 108 for details.

Press [ ] (PLAY).

Use [왗] and [왘] to scroll through the images.

To delete an image

See page 125 for details.

2, 3, 4, 5

Press [ ] (PLAY).

Press [왔] ( ).

Use [왗] and [왘] to display the image you want to delete.

Use [왖] and [왔] to select “Delete”.

• To exit the image delete operation without deleting anything, select “Cancel”.

Press [SET] to delete the image.

GETTING READY

This section contains information about things you need to know about and do before trying to use the camera.

About This Manual

This section contains information about the conventions used in this manual.

■ Terminology

The following table defines the terminology used in this manual.

This term as used in this manual:

“camera”

“file memory”

“battery”

“charger”

Means this:

The CASIO EX-Z50 Digital Camera

The location where the camera is currently storing images you record (page 50)

The NP-40 Rechargeable Lithium Ion Battery

The optionally available CASIO BC-30L rapid charger

This term as used in this manual:

“digital noise”

“a REC mode”

Means this:

Tiny flecks or “snow” in a recorded image or on the monitor screen, which makes the image look grainy.

The currently selected recording mode (Snapshot, BESTSHOT, Movie, Voice Recording, Audio Snapshot)

■ Button Operations

Button operations are indicated by the button name inside of brackets ([ ]).

■ On-screen Text

On-screen text is always enclosed by double quotation marks (“ ”).

■ Supplementary Information

• IMPORTANT! indicates very important

information you need to know in order to use the camera correctly.

• NOTE indicates information that is useful when

operating the camera.

GETTING READY

■ File Memory

The term “file memory” in this manual is a general term that refers to the location where your camera is currently storing the images you record. File memory can be any one of the following three locations.

• The camera’s built-in flash memory

• An SD memory card loaded in the camera

• A MultiMediaCard loaded in the camera

For more information about how the camera stores images, see page 172.

General Guide

The following illustrations show the names of each component, button, and switch on the camera.

Camera

■ Front

1 Shutter button

2 Power button 3 Flash 4 Microphone 5 Self-timer lamp 6 Viewfinder 7 Lens

GETTING READY

■ Back

8 Viewfinder

9 Operation lamp 0 [ ] (PLAY mode)

button

A [ ] (REC mode)

button

B [MENU] button C Zoom button D Strap ring E [SET] button F [][][][] G [DISP] button H Monitor Screen I Speaker

■ Bottom

J Stopper K Memory card slot L Battery compartment M Battery cover N Connector O Tripod screw hole

* Use this hole when attaching to a tripod.

O N

GETTING READY

USB Cradle

Simply placing your CASIO digital camera onto the USB cradle lets you perform the following tasks.

• Battery charging (page 31)

• Automatic transfer of images to a computer (page 160)

• Direct connection to a printer for printing (page 156)

• Viewing of images using the Photo Stand slideshow

feature (page 119).

■ Front

1 Camera connector 2 [USB] lamp 3 [USB] button 4 [CHARGE] lamp 5 [PHOTO] button

■ Back

6 [DC IN 5.3V]

(AC adaptor connector)

7 [USB]

(USB port)

GETTING READY

Monitor Screen Contents

The monitor screen uses various indicators and icons to keep you informed of the camera’s status.

• Note that the example screens in this chapter are for illustrative purposes only. They do not exactly match the screen

contents actually produced on the camera.

■ REC Modes

3421 1 Flash mode indicator

(page 59)

7 8 9 0 A B C

None Auto

Flash Off

Flash On

Red-eye reduction

• If the camera detects that flash is required while auto flash is selected, the flash on indicator will appear when the shutter button is pressed half way.

2 Focus mode indicator

(page 68)

None Auto Focus

Macro

Pan Focus

Infinity

Manual Focus

3 White balance indicator

(page 78)

None Auto

Daylight

Cloudy

Shade

Fluorescent 1

Fluorescent 2

Tungsten

Manual

4 Self-timer (page 63)

None 1-Image

Self-timer 10 sec

Self-timer 2 sec

Triple self-timer

5 REC modes (page 48)

Snapshot

BESTSHOT

Movie

Audio Snapshot

Voice Recording

6 Memory capacity

(pages 52, 91, 204)

(Remaining number of storable images) Movie Recording: Remaining recording time

7 Image size (page 65)

2560×1920 pixels 2560×1712 (3:2) pixels 2048×1536 pixels 1600×1200 pixels 1280×960 pixels

640×480 pixels Movie Recording: Recording time

GETTING READY

8 Quality (page 66)

FINE NORMAL ECONOMY

9 Built-in memory selected

for data storage. Memory card selected for data storage.

(page 146)

0 Shutter speed value

(page 52)

• An out of range aperture or shutter speed causes the corresponding monitor screen value to turn amber.

A Aperture value (page 52)

B ISO sensitivity

(page 100)

C Date and time

(page 139)

D EV value (page 76)

E Battery capacity

(page 35)

F Histogram (page 97)

G Focus frame

(page 51)

• Focusing complete: Green

• Focusing failed: Red

NOTE

• Changing the setting of any one of the following

functions will cause Icon Help (page 103) text to appear on the monitor screen. You can turn off Icon Help if you want (page 103). Flash mode, Focus mode, White balance, Self-timer, REC mode

■ PLAY Mode

1 PLAY mode file type

(page 108)

Snapshot

Movie

Audio Snapshot

Voice Recording

2 Image protection

indicator (page 128)

3 Folder number/File

number (page 127)

Example : When a file named CIMG0023.JPG is stored in a folder named 100CASIO

100-0023

Folder name File name

12 3

4 5 6 7 8 9 0

ABC

4 Image size (page 65)

2560×1920 pixels 2560×1712 (3:2) pixels 2048×1536 pixels 1600×1200 pixels 1280×960 pixels

640×480 pixels Movie Playback: Elapsed play time

5 Quality (page 66)

FINE NORMAL ECONOMY

6 Built-in memory selected

for data storage. Memory card selected for data storage.

(page 146)

GETTING READY

7 Shutter speed value

8 Aperture value

9 ISO sensitivity

(page 100)

0 Date and time

(page 139)

A White balance indicator

(page 78)

Auto

AWB

Daylight

Cloudy

Shade

Fluorescent 1

Fluorescent 2

Tungsten

Manual

B Flash mode indicator

(page 59)

Flash On

Flash Off

Red-eye reduction

C REC modes (page 48)

Snapshot

BESTSHOT

D Battery capacity

(page 35)

E Histogram (page 97)

F EV value (page 76)

IMPORTANT!

• Some information may not display properly if you display an image that was recorded using a different digital camera model.

Changing the Contents of the Monitor Screen

Each press of the [DISP] button changes the contents of the monitor screen as shown below.

■ REC Modes

Indicators on Histogram on

Indicators offMonitor screen off

GETTING READY

■ PLAY Mode

Indicators on Histogram/Details on

Indicators off

IMPORTANT!

• You cannot turn off the monitor screen in the following cases: In the PLAY mode, in the BESTSHOT mode, when not recording in the Movie mode.

• Pressing [DISP] will not change monitor screen contents during movie recording, or during standby or recording of an audio snapshot.

• Pressing [DISP] in the Voice Recording REC mode toggles the monitor screen on (“indicators on”) and off. While a Voice Recording file is displayed in the PLAY mode, pressing [DISP] toggles between

“indicators on” and “indicators off”.

• When playing back the contents of a Voice

Recording file while "indicators off" is selected (Voice Recording file icon only on the monitor screen), the monitor screen will go black about two seconds after you press [SET] to start playback. The Voice Recording file icon (indicators off) will reappear after playback is complete.

GETTING READY

Attaching the Strap

Attach the strap to the strap ring as shown in the illustration.

Strap ring

IMPORTANT!

• Be sure to keep the strap around your wrist when using the camera to protect against accidentally dropping it.

• The supplied strap is intended for use with this camera only. Do not use it for any other purpose.

• Never swing the camera around by the strap.

GETTING READY

Power Requirements

Your camera is powered by a rechargeable lithium ion battery (NP-40).

Loading and Removing the Rechargeable Battery

■ To load the battery

Slide the battery cover in the direction indicated by the arrow, and then swing it open.

While pulling the stopper in the direction indicated by the arrow in the illustration, align the (–) mark on the battery with the (–) mark on the camera and slide the battery into the camera.

Stopper

(–) marks

(–) mark

• Push the bottom of the battery, and make sure that the stopper securely locks the battery in place.

NP-40

GETTING READY

Swing the battery cover closed, and then slide it in the direction indicated by the arrow.

IMPORTANT!

• Use only the special NP-40 rechargeable lithium ion battery to power this camera. Use of any other type of battery is not supported.

The battery is not charged when you purchase the camera. You need to charge the battery before using the camera for the first time (page 31).

■ To remove the battery

Open the battery cover.

Pull the stopper in the direction indicated by the arrow.

• This will cause the battery to come part way out of the slot.

Stopper

Release the stopper and pull the battery from the camera.

• Take care so you do not drop the battery.

+ 178 hidden pages