• Before using it, be sure to read the precautions contained in this User’s Guide.
• Keep the User’s Guide in a safe place for future reference.
• For the most up-to-date information about this product, visit the official EXILIM
Website at http://www.exilim.com/
Accessories
As you unpack your camera, check to make sure that all accessories shown below
are included. If anything is missing, contact your original retailer.
Rechargeable lithium ion
battery (NP-150)
To attach the strap to the camera
1
Strap
2
USB-AC adaptor
(AD-C54UC)
Attach strap here.
Micro USB cable
2
Read this first!
• The contents of this manual are subject to change without notice.
• The contents of this manual have been checked at each step of the production
process. Feel free to contact us if you notice anything that is questionable,
erroneous, etc.
• Any copying of the contents of this User’s Guide, either in part or its entirety, is
forbidden. Except for your own personal use, any other use of the contents of this
manual without the permission of CASIO COMPUTER CO., LTD. is forbidden
under copyright laws.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits suffered by you or any third party due to the use or malfunction of this
product.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages, lost
profits, or claims by third parties arising out of the use of EXILIM Remote.
• CASIO COMPUTER CO., LTD. shall not be held liable for any damages or lost
profits caused by loss of memory contents due to malfunction, repair, or any other
reason.
• Note that the example screens and product illustrations shown in this User’s Guide
may differ somewhat from the screens and configuration of the actual camera.
LCD Panel
The liquid crystal panel of the monitor screen uses high-precision technology that
provides a pixel yield in excess of 99.99%. This means that some very small number
of pixels may not light or may remain lit at all times. This is due to the characteristics
of the liquid crystal panel, and does not indicate malfunction.
Take test shots
Before shooting your final image, shoot a test shot to ensure that the camera is
recording correctly.
The monitor screen uses various indicators, icons, and values to keep you informed
of the camera’s status.
• The sample screens in this section are intended to show you the locations of all the
indicators and figures that can appear on the monitor screen in various modes.
They do not represent screens that actually appear on the camera.
. Snapshot Recording
Tab (page 30)
356
7241
bs
br
bq
bo
bp
bo
blbmbn
NOTE
•bm Movie capacity and bn Snapshot capacity do not appear in the following cases,
even if “Information On” is selected for the information display setting (page 11).
– Portrait orientation display
– When the monitor screen and lens are facing in the same direction
1
Focus mode (page 65)
2
Self-timer mode (page 58)
3
8
Digital zoom (page 44)
4
Snapshot image size (page 60)
5
9
Movie quality (pages 47, 61)
6
LED light (page 59)
7
Zoom icons (pages 32, 44)
bk
8
Quick send icon (page 88)
9
“b” Movie icon (pages 33, 47)
bk
Battery level indicator (page 25)
bl
Movie capacity (recording time) (page 32)
bm
Snapshot capacity (number of shots)
bn
(page 32)
PLAY mode icon (page 30)
bo
Information icon (page 11)
bp
Remote capture icon (page 86)
bq
Recording mode icon (page 39)
br
Menu icon (page 57)
bs
9
. Movie Recording
13
. Snapshot Viewing
42
13
bn
bm
bl
bk
9
. Movie Playback
3241
9bk8
Movie quality (
1
Recording time switch icon (page 48)
2
Movie remaining time icon (page 48)
3
5
Remaining movie memory capacity/
4
Movie recording time (pages 48, 135)
Zoom icons (pages 32, 44)
5
“c” Movie stop icon (pages 33, 48)
6
6
Tab (page 30)
42
78
1
Protect indicator (page 81)
2
Folder name/file name (page 103)
3
5
Snapshot image size (page 60)
4
Image menu icon (p
5
Image scroll icons (pages 35, 68)
6
Battery level indicator (page 25)
7
Date/time (pages 25, 108)
8
6
REC mode icon (page 30)
9
Information icon (page 11)
bk
Image send icon (pages 90, 92)
bl
Delete icon (page 35)
bm
Menu icon (page 75)
bn
Tab (page 30)
1
Protect indicator (page 81)
2
Folder name/file name (page 103)
5
3
Movie quality (pages 47, 61)
4
6
Image menu ico
5
Movie recording time (page 68)
6
Image scroll icons (pa
7
Battery level indicator (page 25)
8
7
Date/time (pages 25, 108)
9
“6”
Movie play ico
bk
pages 47, 61)
age 72)
n (page 72)
ges 35, 68)
n (page 68)
10
. Selecting Display Information (DISP)
Each touch of “DISP” will cycle through settings that display or hide on-screen
information. You can configure separate settings for the REC mode and PLAY mode.
• If “DISP” is not displayed on the screen, touch the tab to display it.
• Display information cannot be changed during movie recording.
OffNo information displayed.
Information OnShows information about image settings, etc.
Status On
When Status On is selected for display information in the PLAY mode, the exposure,
shutter speed, and ISO sensitivity setting values of the currently displayed image are
displayed in orange when the current image’s Auto Exposure (AE) is not correct.
Shows more detailed information about settings.
• When Status On is selected, you will not be able to view the
subject on the monitor screen.
11
Quick Start Basics
What you can do with your CASIO camera
Your CASIO camera is packed with a powerful selection of features and functions to
make recording of digital images easier, including the following main functions.
A variety of shooting styles
The frame can be opened and the LCD monitor screen
rotated into positions that make long-term shooting
more comfortable and simplify self-shooting.
*See page 14 for more information.
Simple touch panel operation
The monitor screen is a touch panel that can be used
to perform operations.
*See page 17 for more information.
Simple self-portrait shooting
The monitor screen can be rotated so it faces in the
same direction as the camera’s lens, making selfshooting much easier.
*See page 46 for more information.
Make-Up
Make-up smoothes the skin texture of the subject and
softens facial shadows caused by harsh sunlight for
better looking portraits.
*See page 43 for more information.
Posing Shot
Posing Shot lets you shoot five successive snapshots,
as the camera provides voice guidance.
*See page 40 for more information.
12
Quick Start Basics
ART SHOT
A variety of artistic effects help to make even common,
ordinary subjects become more novel and exciting.
“ART SHOT” provides the following effects: HDR Art,
Crystal ball, Sparkling Shot, Toy Camera, Soft Focus,
Light Tone, Pop, Sepia, Monochrome, Miniature,
Fisheye.
*See page 41 for more information.
Extract a subject from one
photo and insert it into
another
You can extract a person or object out of one snapshot and insert into another
snapshot, or you can add a built-in frame to a snapshot.
*See pages 78, 80 for more information.
Paint
Draw figures, write text, or stamp information into a
recorded snapshot.
*See page 77 for more information.
Wireless LAN Connection
Turns your smartphone into a camera remote
controller and allows you to send images recorded with
your camera to your smartphone.
*See page 84 for more information.
13
Quick Start Basics
Changing the Camera Style to Suit Shooting Conditions
You can change the configuration of the camera by opening or closing the frame and
rotating the monitor screen panel to suit shooting conditions.
IMPORTANT!
• Do not apply strong pressure to the surface of the monitor screen. Doing so can
damage it.
• Never touch the lens with your fingers. Finger smudges, dirt, and other foreign
matter on the lens can interfere with proper operation of the camera. Use a blower
or other means to keep the lens and flash window free of dirt and dust, and wipe
gently with a soft, dry cloth.
Opening and Closing the Frame
The frame of the camera can be rotated 360 degrees.
1. With the monitor screen facing towards
you, hold onto the frame.
2. Push the monitor screen panel from
behind.
3. Holding the edges of the monitor
screen panel, swing the frame open.
IMPORTANT!
• Do not try to open or close the frame while the monitor screen panel is rotated.
Doing so can cause the frame to come into contact with the monitor screen panel
and cause malfunction.
14
Quick Start Basics
Rotating the Monitor Screen
Use the steps below to rotate the monitor screen.
NOTE
• While holding the monitor screen panel as shown in the illustration, you can rotate
it 180 degrees clockwise and 90 degrees counterclockwise.
• The monitor screen panel can also be rotated when the frame is closed.
1. Hold the camera as shown in the
illustration.
2. Firmly holding the frame, carefully rotate the monitor screen panel.
180 degrees clockwise
90 degrees counterclockwise
15
Quick Start Basics
Camera Configurations
You can open the frame and rotate the monitor screen for a variety of different styles.
Normal ShootingMovie Recording
Shoot with the monitor screen facing the
opposite direction of the lens.
Tabletop ShootingSelf-portrait Shooting
Point the monitor screen and lens in the
same direction and open the frame
about 30 degrees so the camera can
stand up.
Open the frame 90 degrees and hold the
frame. You can also shoot with the
camera upside down, if you like.
Open the frame, point the monitor
screen and lens in the same direction,
and press the shutter button on the
frame to shoot.
16
Quick Start Basics
NOTE
• When shooting hold the camera still. Carefully press the shutter button and take
care to avoid all movement as the shutter releases and for a few moments after it
releases.
• Take care that your fingers and the strap do not cover
any of the areas indicated in the illustration.
LED light
• To protect against accidentally dropping the camera,
attach the wrist strap and make sure it is around your
fingers or wrist while you are operating the camera.
• Never swing the camera around by its strap.
• The supplied strap is intended for use with this
camera only. Never use it for any other purpose.
Microphone
Lens
IMPORTANT!
• Take care to ensure that your finger is not blocking or
is not too close to the LED light. Fingers can cause
unwanted shadows when shooting.
Using the Touch Panel
The monitor screen of the camera is a touch panel. This means you can perform the
following operations by touching the screen with your fingers.
Touch
Momentarily touching the screen with your finger.
Touch the screen to select an icon or menu item, and
to configure settings.
Touch-and-hold
Holding your finger against the screen.
Touch and hold the screen to scroll images at high
speed, or to perform continual frame-by-frame
playback of a movie.
17
Quick Start Basics
Drag
Holding your finger against the screen as you drag it
up, down, left, or right.
Use drag to move a screen image to a different
location, and to scroll between images.
Spread
Holding your thumb and forefinger against the screen
as you spread them out.
Use spread to enlarge the screen image.
Squeeze
Holding your thumb and forefinger against the screen
as you bring them together.
Use squeeze to reduce the size of the screen image.
IMPORTANT!
• Never use a pointed or hard object to perform screen operations. Doing so can
damage the screen.
NOTE
• Applying a commercially available LCD protective sheet will reduce the operation
sensitivity of the monitor screen.
18
Quick Start Basics
First, charge the battery prior to use.
Note that the battery of a newly purchased camera is not charged. Perform the steps
below to load the battery into the camera and charge it.
• Your camera requires a special CASIO rechargeable lithium ion battery (NP-150)
for power. Never try to use any other type of battery.
Loading the Battery
1. Open the cover.
While depressing the [BATT.OPEN]
button, slide the cover in the direction
indicated by the arrow in the illustration.
1
3
2. Load the battery.
With the CASIO logo on the battery
upwards, load the battery into the
camera as shown in the illustration.
3. Close the cover.
While holding down the [BATT.OPEN]
button, align the tabs of the cover with the
notches on the camera and then slide the
cover in the direction of the arrow.
[BATT.OPEN]
button
Battery
NG
1
[BATT.OPEN]
button
2
OK
CASIO logo
2
3
19
Quick Start Basics
To replace the battery
1. Open the battery cover and remove the
current battery.
As shown in the illustration, pull up the edge of
the battery to remove it.
2. Load a new battery.
Charge the Battery
You can use either of the two following methods to charge the battery. Before
charging the battery, use the procedure under “Opening and Closing the Frame”
(page 14) to open the frame.
• USB-AC adaptor
• USB connection to a computer
. To charge with the USB-AC adaptor
The adaptor lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below.
Charging time: Approximately 140 minutes
[USB] port
USB-AC adaptor
3
1
2
Micro USB cable
(included with camera)
u mark of the small (micro USB) connector facing the
side opposite that of the monitor screen.
• When disconnecting the USB-AC adaptor from the camera, be sure to disconnect
from the camera first.
20
Quick Start Basics
IMPORTANT!
• A battery that has not been used for a long time, or ambient temperature extremes
can cause charging to take longer than normal. If charging takes longer than about
five hours, a timer will terminate it automatically, even if the battery is not fully
charged. This is indicated by the back lamp flashing red. If the battery has not been
used for a very long time, charging may be terminated automatically and the back
lamp may start flashing red after only about 60 minutes. In either case, disconnect
the USB cable from the camera and then reconnect it to resume charging.
•Pressing [p] (Power) while the USB-AC adaptor is connected to the camera will
turn on the camera with power being supplied by the battery. Because of this,
charging will stop.
• The USB-AC adaptor will become warm during charging. This is normal and does
not indicate malfunction.
• The shape of the power plug depends on each country or geographic area.
Back Lamp Operation
Lamp StatusDescription
Back lamp
Lit RedCharging
Abnormal ambient temperature, USB-AC
Flashing Red
adaptor problem, or battery problem (page
124), or charging terminated by the timer
OffCharging complete
21
Quick Start Basics
USB Cable Connection Precautions
• When connecting the USB cable to the camera, make sure that the cable
connector and monitor screen panel are oriented correctly as shown in the
illustration below.
Make sure that the u mark side of the
USB cable connector and the front of the
monitor screen panel (the side opposite that
of the monitor screen) are facing in the same
direction.
Front of monitor screen
The back lamp always initially light after charging starts. Even if the battery is
already fully charged, the lamp will light momentarily.
If the lamp does not light, check the orientation of the USB cable connector.
• Make sure that you insert the cable connector into the USB port until you feel it
click securely into place. Failure to insert the connector fully can result in poor
communication or malfunction.
• Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as
shown in the illustration.
panel
22
Quick Start Basics
. To charge using a USB connection to a computer
USB connection lets you charge the battery while it is loaded in the camera.
While the camera is turned off, connect in the sequence shown below (
[USB] port
USB port
1, 2
Computer
(power turned on)
USB
).
1
Micro USB cable
(included with camera)
u mark of the small (micro USB) connector facing the side
opposite that of the monitor screen.
• If the camera is on, press [p] (Power) to turn it off before connecting it to your
computer.
Charging time: Approximately 170 minutes
IMPORTANT!
• The first time you connect the camera to your computer with the USB cable, an
error message may appear on your computer. If this happens, disconnect and then
reconnect the USB cable.
• A battery that has not been used for a long time, certain types of computers, and
connection conditions can cause charging to take more than approximately five
hours, which will trigger a timer that terminates charging automatically, even if the
battery is not fully charged. If this happens, disconnect and then reconnect the
USB cable to restart charging. To complete charging faster, use of the included
USB-AC adaptor is recommended.
• If the battery has not been used for a very long time, charging may terminate
automatically and the back lamp may start flashing red or go out after only about
60 minutes. In either case, use of the USB-AC adaptor that comes with the camera
is recommended.
• If you turn on the camera while charging over a USB connection to a computer is in
progress, the camera will establish a USB connection with the computer. Though
charging normally should continue at this time, certain types of computers or
connection environments may stop charging if supply power is low. This will be
indicated by the camera’s back lamp lighting green.
• Charging is not performed while the connected computer is in the hibernate mode.
2
23
Quick Start Basics
Back Lamp Operation
Lamp StatusDescription
Lit Red,
(Lit/Flashing Amber)
Charging
Back lamp
Abnormal ambient temperature,
Flashing Red
charging taking abnormally long, or
battery problem (page 124)
Off, (Lit Green)Charging complete
• The information in parentheses in the above table shows the lamp status while the
camera is turned on during charging.
Other Charging Precautions
• With the two charging methods described above, you can charge the camera’s
battery (NP-150) without removing it from the camera. Never use any other type of
charger device. Attempting to use a different charger can result in unexpected
accident.
• This model can be charged only via from USB 2.0 specification USB port only.
• USB charging devices and power supply devices are subject to fixed standards.
Use of an inferior device or a device that is not up to standard can cause
malfunction and/or failure of your camera.
• Operation is not guaranteed in the case of a computer built or modified by you.
Even in the case of a commercially available computer, certain USB port
specifications may make it impossible to charge via the USB cable.
• A battery that is still warm immediately after normal use may not charge fully. Give
the battery time to cool before charging it.
• A battery discharges slightly even when it is not loaded in the camera. Because of
this, it is recommended that you charge the battery immediately before you need to
use it.
• Charging the camera’s battery may cause interference with TV and radio reception.
If this happens, plug the USB-AC adaptor into an outlet that is further away from
the TV or radio.
• Actual charging time depends on current battery capacity and charging conditions.
• Do not use the USB-AC adaptor with any other device.
• Never use the power cord with another device.
• Use only the USB-AC adaptor and USB cable specified in this manual for charging.
Use of any other type of devices may result in improper charging.
24
Quick Start Basics
Checking the Current Battery Level
As battery power is consumed, a battery indicator on the monitor screen indicates its
current level as shown below.
LevelHighLow
Battery Indicator***
Indicator ColorCyan* Yellow*Red*Red
indicates battery power is low. Charge the battery as soon as possible.
Recording is not possible when is indicated. Charge the battery immediately.
• The level shown by the battery indicator may change when you switch between the
REC mode and PLAY mode.
• Leaving the camera for about 30 days with no power supplied while the battery is
dead will cause its date and time settings to be cleared. A message telling you to
configure time and date settings will appear the next time you turn on the camera
after restoring power. When this happens, configure date and time settings (page
108).
• See page 138 for information about battery life and number of shots.
Configuring Basic Settings the First Time You Turn On the
Camera
The first time you turn on the camera, a screen appears for configuring the display
language, date, and time settings. Failure to set the date and time correctly will cause
the wrong date and time data to be recorded with images.
IMPORTANT!
• A screen for language selection will not appear in step 2 of the procedure below if
you purchased a camera intended for the Japanese market. To change the display
language from Japanese in this case, use the procedure under “Specifying the
Display Language (Language)” (page 109). Note that a version of this manual in
the language you select may not be included with a camera intended for the
Japanese market.
• Camera models sold in certain geographic areas may not support display language
selection.
25
Quick Start Basics
1. Press [p] (Power) to turn on the camera.
2. Drag (page 18) upwards and downwards until
you find the language you want, and then touch
to select it.
3. Touch the date display format you want.
Example: July 10, 2015
YY/MM/DD
DD/MM/YY
MM/DD/YY
* 15/7/10
* 10/7/15
* 7/10/15
[p] (Power)
4. Touch the value you want to change (year,
month, day, hour, minute).
5. Touch “8” or “2” to change the currently
selected value.
• Touching and holding “8” or “2” will change the
setting at high speed.
• To switch between 12-hour and 24-hour format,
touch the 12/24 hour switch icon.
12/24 hour switch icon
6. When the date and time settings are the way you want, touch “OK”.
7. Touch “Auto” or “Premium Auto Pro” to select the default auto
recording mode you want.
8. Touch “Apply”.
• You will be able to change this setting later, if you want. See page 31 for
details.
If you make a mistake configuring display language, date, or time settings with the
above procedure, refer to the following pages for information about how to correct
the settings.
– Display language: Page 109
– Date and time: Page 108
NOTE
• Each country controls its local time offset and the use of summer time, and so they
are subject to change.
26
Quick Start Basics
Preparing a Memory Card
Though the camera has built-in memory that can be used to store images and
movies, you probably will want to purchase a commercially available memory card for
greater capacity. The camera does not come with a memory card. Images recorded
while a memory card is loaded are saved to the memory card. When no memory card
is loaded, images are saved to built-in memory.
• For information about memory card capacities, see page 134.
• The above are supported memory card types as of January
2014.
• This camera supports use of microSD memory cards of the following types and
capacities: microSD memory cards up to 2GB, microSDHC memory cards from
2GB up to 32GB, microSDXC memory cards from 32GB up to 2TB. Note that the
ability to use any particular card with this camera, even if it satisfies the above
capacity and type requirements, is not guaranteed.
Warning!
*
0 Memory cards are small and present a risk of accidentally being swallowed
by infants and young children. Keep memory cards out of the reach of
infants and young children. If a memory card is ever swallowed accidentally,
contact a physician immediately.
+
27
Quick Start Basics
To load a memory card
1. Press [p] (Power) to turn off the
camera and then open the frame
(page 14).
2. Hook your nail into the groove of
the [CARD HDMI] cover and pull the
cover in the direction indicated by
the arrow to open it.
3. Load a memory card.
Positioning the memory card so its back
is facing upwards (towards the monitor
screen side of the camera), slide it into
the card slot all the way in until you hear it
click securely into place.
4. Close the [CARD HDMI] cover and
then return the frame to its original
position.
[CARD HDMI] cover
Back
FrontBack
IMPORTANT!
• Never insert anything besides a supported memory card (page 27) into the memory
card slot.
• Should water or any foreign object ever get into the card slot, immediately turn off
the camera, and contact your retailer or nearest CASIO authorized service center.
28
Quick Start Basics
. To replace the memory card
Press the memory card and then release it.
This will cause it to pop out of the memory
card slot slightly. Pull the card out the rest of
the way and then insert another one.
• Never remove a card from the camera
while the back lamp is flashing green.
Doing so can cause the image save
operation to fail and even damage the
memory card.
To format (initialize) a new memory card
Format a memory card on the camera before using it for the first time.
IMPORTANT!
• Formatting a memory card that already has snapshots or other files on it, will delete
its contents. Normally you do not need to format a memory card again. However, if
storing to a card has slowed down or if you notice any other abnormality, re-format
the card.
• Be sure to use the camera to format a memory card. Formatting a card on a
computer will result in a non-SD standard format, which can greatly slow down
processing time and cause compatibility, performance, and other problems.
1. Load a memory card (page 28).
2. Turn on the camera and then touch “MENU”.
• If “MENU” is not displayed on the screen, touch the tab to display it (page 38).
3. Drag upwards and downwards until you find “Setup”, and then touch it.
4. Touch “Format”.
5. Touch “Format” and then touch “Yes”.
This starts the memory card format operation.
29
Quick Start Basics
Turning Power On and Off
. To turn on the camera
Back lamp
Press [p] (Power).
This will turn on the camera, which is indicated when the
back lamp lights green, and enter the REC mode.
Entering the REC Mode and PLAY Mode
In the REC mode, touch “p” (PLAY).
• If Auto, BEST SHOT, or ART SHOT
To enter the
PLAY mode
is selected as the recording mode,
you can also switch to the PLAY
[p] (Power)
mode by touching the tab and then
To enter the
REC mode
touching “p” (PLAY).
In the PLAY mode, touch the tab. On
the screen image that appears, touch
r” (REC).
“
Screen after tab is
touched
. To turn off the camera
Press [p] (Power).
Tab
“p” (PLAY) / “r” (REC)
NOTE
• To conserve battery power, an Auto Power Off function will turn off power
automatically if you do not perform any operation for about five minutes.
30
Quick Start Basics
Loading...
+ 110 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.