Casio EX-F1 Guide

EX-F1 E

Using Prerecord Movie (Prerecord (Movie))

With this feature, the camera pre-records up to five seconds of whatever is happening in front of the lens in a buffer that is continually updated. Pressing [0] saves the prerecorded action (buffer contents) followed by real-time recording. Real-time recording continues until you stop it.

. To set up the camera to shoot with Prerecord Movie

1. In the REC mode, set the mode dial to b.

2. Press [SET] and then select “Prerecord (Movie)”.

At this point the back lamp will flash. Up to five seconds of buffer contents will be stored, followed by real-time movie recording.

. To shoot a Prerecord Movie

1. With the camera pointed at the subject, press [0].

This will save five seconds of action pre-recorded in the buffer and start real-time recording.

• When recording a high-speed movie, half press the shutter button before

pressing [0] and pre-focus the subject. However, the movie that is temporarily recorded in the buffer is deleted.

2. Press [0] again to stop recording.

• To turn off Prerecord Movie recording, set the mode dial to t.

• When shooting with the High-speed Movie “30-300fps” setting, you cannot change the speed (fps) setting when recording to the buffer before pressing [0]. You can change the speed (fps) setting after you press [0] to start realtime recording.

NOTE

• The following are the maximum file sizes when shooting with “Prerecord (Movie)” at a high speed of 600 fps or 1200 fps. 600 fps : 2 GB 1200 fps : 1GB