Page 1
MA1406-EA
© 2014 CASIO COMPUTER CO., LTD.
Operation Guide 5436
x Your watch may differ somewhat from the one shown in the illustration.
Day
Click 2
Click 1
Crown
Crown Operations
Some water-resistant models (100meters, 200meters)
have a screw-in crown. When you need to perform a crown
operation, rotate it towards you to unscrew it. Then pull the
crown out. Avoid applying undue force when pulling. The watch
loses its water resistance while the crown is unscrewed. After
performing a crown operation, fully screw the crown back in.
If your watch has a rotary bezel...
You can rotate the bezel to align its ▼ mark with the
minute hand. Then you will be able to tell how much
time has elapsed since aligning the ▼ mark.
Current
Specifi cations
Accuracy: ±20seconds average per month
Battery: One silver oxide battery (Type: SR920SW)
Battery Life: Approximately 3years
Crown
Loosen
Start
Elapsed time
To adjust the time setting
When the second hand is at 12o’clock, pull
Crown out to Click 2.
the
Rotate the Crown to change the time setting.
Push the Crown back in.
To change the day setting
Pull the Crown out to Click 1.
Rotate the Crown to set the day.
Push the Crown back in.
Note
x Take care that you set the
correct AM or PM time.
x When changing the time,
move the minute hand four
ve minutes past your
or fi
fi nal setting, and then back it
up to the setting you want.
Note
x The day setting uses a
31-day month. Make
adjustments for months of
shorter lengths.
x Avoid changing the day
setting between the hours
of 9 p.m. and 1 a.m.
Otherwise, the day setting
may not change correctly at
midnight.
1
Loading...