Casio 5398 User Manual

MA1804-EA
© 2018 CASIO COMPUTER CO., LTD.
User’s Guide 5398
For a full Operation Guide and Q&A information about this product, go to the website below.
http://world.casio.com/manual/wat/
E-2
2. Press C to move the flashing in the sequence shown below to select a setting.
Home City and Summer Time Time and Date
City Code
C
C
E-4
C C C
DST Seconds
Illumination Duration
Button Operation Tone On/Off
12/24-Hour Format
C
Minute
(and hour)
C
Hour (only)
C
YearMonth/Day
CC
Congratulations upon your selection of this CASIO watch.
To ensure that this watch provides you with the years of service for which it is designed, carefully read and follow the instructions in this manual, especially the information under “Operating Precautions” and “User Maintenance”. Be sure to keep all user documentation handy for future reference.
Important!
x This manual provides a brief overview of your watch.
Configuring Home City, Time and Date Settings
x Configure Home City and summer time settings first. After that, configure time and
date settings.
Rotary switch Operations
Important!
x With this watch, you do not need to pull out the rotary switch before
rotating it.
1. In the Timekeeping Mode, hold down A until the flashing Hold indicator
disappears from the display and the currently selected city code appears on the right side of the upper display.
x This indicates the city code setting mode.
3. When the timekeeping setting you want to change is flashing, perform the operation described below.
Screen To do this: Do this:
Change the city code
ENGLISH
Toggle between Daylight Saving Time (ON) and Standard Time (OFF)
Toggle between 12-hour (12H) and 24-hour (24H) timekeeping
Reset the seconds to 00
Change the hour or minute
Change the month or day
4. Press A to exit the setting mode.
Rotate the rotary switch.
Press D.
Rotate the rotary switch.Change the year
E-1
E-3
E-5
Mode Selection and Operations
x Press C to change the mode. x To return to the Timekeeping Mode from any other mode, hold down C for about
two seconds.
Start/
Stop
Stopwatch Mode
Split/Reset
Timekeeping Mode
Turns on illumination.
CC
Countdown Timer hand
E-6
Misaligned Hands
The analog hands may become misaligned as described below if the watch is exposed to strong magnetism, impact, or other abnormal conditions.
x Analog time and digital time are different from each other
If this happens, refer to “Adjusting Hand Positions” in the Operation Guide available at the CASIO website and adjust the hand alignment.
E-8
World Time Mode
Scrolls between cities.
C
C
C
Alarm Mode Countdown Timer Mode
Specifications
Accuracy at normal temperature: ±15 seconds a month Digital Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the
Time format: 12-hour and 24-hour Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099 Other: Home City code (can be assigned one of 48 city codes);
Standard Time/Daylight Saving Time (summer time)
Analog Timekeeping: Hour, minutes (hand moves every 20seconds) Stopwatch:
Measuring unit: 1/100 second Measuring capacity: 23:59'59.99" Measuring modes: Elapsed time, split time, two finishes, Auto Start
World Time: 48 cities (31 time zones)
Other: Daylight Saving Time/Standard Time; Home City/World Time City
switching
week
E-7
E-9
User’s Guide 5398
Alarms: 5 Daily alarms (four one-time alarms; one snooze alarm); Hourly time signal Countdown Timer:
Measuring unit: 1 second Countdown range: 60 minutes Countdown start time setting range: 1 to 60 minutes (1-minute increments) Elapsed time: 60 minutes
Illumination: LED (light-emitting diode); Selectable illumination duration
Other: Button operation tone on/off; Moving the Hands to View the Digital Display Power Supply: Two silver oxide batteries (Type: SR927W)
Specifications are subject to change without notice.
E-10
(approximately 1.5 seconds or 3 seconds); Auto Light Switch
Approximate battery operating time: 3 years under the following conditions:
x 1 illumination operation (1.5 seconds) per day x Alarm: 10 seconds/day
Frequent use of illumination runs down the battery.
City Code Table
L-1
City Code Table
City
City name
Code
PPG PAGO PAGO –11 HNL HONOLULU –10 ANC ANCHORAGE –9 YVR VANCOUVER LAX LOS ANGELES YEA EDMONTON DEN DENVER MEX MEXICO CITY
CHI CHICAGO NYC NEW YORK –5 SCL SANTIAGO YHZ HALIFAX YYT ST. JOHN’S –3.5
RIO DE JANEIRO
RIO FEN
F. DE NORONHA
L-2
UTC Offset/
GMT Differential
City
City name
City
City name
Code
RAI PRAIA –1
UTC
–8
–7
–6
–4
–3 –2
LON LONDON MAD MADRID PAR PARIS ROM ROME BER BERLIN STO STOCKHOLM ATH ATHENS
JRS JERUSALEM
MOW MOSCOW
JED JEDDAH THR TEHRAN +3.5
UTC Offset/
GMT Differential
0LIS LISBON
+1
+2CAI CAIRO
+3
Code
DXB DUBAI +4 KBL KABUL +4.5
KHI KARACHI +5 DEL DELHI +5.5 KTM KATHMANDU +5.75 DAC DHAKA +6
RGN YANGON +6.5
BKK BANGKOK +7
SIN SINGAPORE
HKG HONG KONG
BJS BEIJING TPE TAIPEI SEL SEOUL TYO TOKYO ADL ADELAIDE +9.5
UTC Offset/
GMT Differential
+8
+9
City
City name
Code
GUM GUAM
SYD SYDNEY NOU NOUMEA +11 WLG WELLINGTON +12
x
This table shows the city codes of this
watch (As of December 2013).
x
The rules governing global times
(UTC offset and GMT differential) and
summer time are determined by each
individual country.
UTC Offset/
GMT Differential
+10
L-3
Loading...