Casio 5092, 5030 Owner's Manual
MA0906-EA
Operation Guide 5030/5092
About This Manual
• This watch is available with either of two display types: Type A and Type B. All of the
examples in this manual show Type A.
• Depending on the model of your watch, display text appears either as dark figures
on a light background or light figures on a dark background. All sample displays in
this manual are shown using dark figures on a light background.
• Button operations are indicated using the letters shown in the illustration.
• Each section of this manual provides you with the information you need to perform
operations in each mode. Further details and technical information can be found in
the “Reference” section.
Type A Type B
General Guide
• Press B to change from mode to mode.
Timekeeping Mode Calendar Mode Alarm Mode Dual Time Mode Stopwatch Mode
Press .
Timekeeping
PM indicator
Hour : Minutes
Seconds
To set the digital time
3. When the setting you want to change is flashing, use B to change it as described
below.
Screen To do this:
Reset the seconds to
Change the hour or minutes
Toggle between 12-hour ( ) and 24-hour ( )
4. Press C to exit the setting screen.
Setting the Analog Time
Perform the procedure below when the time indicated by the analog hands does not
match the time of the digital display.
To adjust the analog time
In any Mode, press A to advance the analog time setting by 20 seconds.
• Holding down A advances the analog time setting at high speed.
timekeeping
This watch features separate digital and analog
timekeeping. The procedures for setting the digital time
and analog time are different.
Setting the Digital Time
Use the Timekeeping Mode to set and view a digital
display of the current time. When setting the digital time,
you can also configure settings for the 12/24-hour format.
1. In the Timekeeping Mode, hold down C until the
seconds start to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
Seconds Hour Minutes
(Exit the setting screen) 12/24-Hour format
Do this:
Press B.
Calendar
Month
Day
Day of the week
To set the date
3. When the setting you want to change is flashing, use B to change it as described
below.
Screen To do this:
Change the month
Change the day
4. Press C to exit the setting screen.
Change the day of the week
The watch’s calendar normally makes allowances for
different month lengths. However, you will have to adjust
the date manually in the case of leap years.
• All of the operations in this section are performed in the
Calendar Mode, which you enter by pressing B.
1. In the Calendar Mode, hold down C until the month
start to flash, which indicates the setting screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
Month Day
(Exit the setting screen) Day of the week
Do this:
Press B.
1
Operation Guide 5030/5092
Alarm
Alarm Mode indicator
Alarm time
(Hour : Minutes)
Hourly time signal
on indicator
Alarm Mode indicator
Type B
To set an alarm time
Hour Left minutes digit Right minutes digit
(Exit the setting screen)
3. When the setting you want to change is flashing, use B to change it as described
below.
Screen To do this:
Change the Hour
Change the Left minutes digit
Change the Right minutes digit
Signal On
Alarm On
4. Press C to exit the setting screen.
Alarm Operation
The alarm sounds at the preset time for about 20 seconds, regardless of the mode the
watch is in.
• To stop the alarm tone after it starts to sound, press any button.
To select an alarm tone
In any mode (except when a setting screen is on the display), hold down B until an
alarm tone sounds.
• There are a total of four different alarm tones. The alarm tone that sounds when you
hold down B will be the one that is currently selected. If you want to select a
different alarm tone, hold down B again.
• The alarm tone you select is used for the Daily Alarm and the Hourly Time Signal.
• Note that holding down B to select an alarm tone also changes the watch’s mode.
After you are finished, use B to change back to the mode you want.
When the Daily Alarm is turned on, the currently selected
alarm tone sounds when the alarm time is reached.
Turning on the Hourly Time Signal causes the currently
selected alarm tone to sound at the top of each hour.
• All of the operations in this section are performed in the
Alarm Mode, which you enter by pressing B.
1. In the Alarm Mode, hold down C until the hour setting
of the alarm time starts to flash, which indicates the
setting screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
Alarm/Hourly Time Signal on/off setting
Do this:
Press B.
Signal Off
Alarm Off
Signal Off
Alarm On
Signal On
Alarm Off
Dual Time
The Dual Time Mode lets you keep a different time.
• In the Dual Time Mode, the seconds count is synchronized with the seconds count
of the current digital time.
• All of the operations in this section are performed in the Dual Time Mode, which you
enter by pressing B.
To set the Dual Time
Dual time (Hour : Minutes)
Dual Time indicator
1. In the Dual Time Mode, hold down C until the hour
setting starts to flash, which indicates the setting
screen.
2. Press C to move the flashing in the sequence shown
below to select the other settings.
Hour Minutes
Stopwatch
Minutes : Seconds
Stopwatch Mode
indicator
1/100 second
Stopwatch Mode
indicator
Type B
To measure times with the stopwatch
Start Stop Re-start Stop Clear
The stopwatch lets you measure elapsed time.
• The display range of the stopwatch is 59 minutes,
59.99 seconds.
• The stopwatch continues to run, restarting from zero
after it reaches its limit, until you stop it.
• The stopwatch measurement operation continues even
if you exit the Stopwatch Mode.
• All of the operations in this section are performed in the
Stopwatch Mode, which you enter by pressing B.
Hold down
Reference
This section contains more detailed and technical information about watch operation.
It also contains important precautions and notes about the various features and
functions of this watch.
Auto Return Feature
If you leave a screen with flashing digits on the display for two or three minutes
without performing any operation, it automatically changes to the Timekeeping Mode.
Scrolling
The B button is used in various modes and setting screens to scroll through data on
the display. In most cases, holding down B during a scroll operation scrolls through
the data at high speed.
Timekeeping
• Resetting the seconds to while the current count is in the range of 30 to 59
causes the minutes to be increased by 1. In the range of 00 to 29, the seconds are
reset to
• With the 12-hour format, the P (PM) indicator appears on the display for times in the
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without
without changing the minutes.
range of noon to 11:59 p.m. and no indicator appears for times in the range of
midnight to 11:59 a.m.
any indicator.
Specifications
Accuracy at normal temperature: ±30 seconds a month
Digital Timekeeping: Hour, minutes, seconds, p.m. (P)
Time format: 12-hour and 24-hour
Analog Timekeeping: Hour, minutes (hand moves every 20 seconds)
Calendar: Month, day, day of the week
Calendar system: Auto-calendar set at 28 days for February
Alarm: Daily alarm; Hourly Time Signal
Dual Time: Hour, minute, second
Time format: 12-hour and 24-hour
Stopwatch
Measuring unit: 1/100 of a second
Measuring capacity: 59' 59.99''
Measuring modes: Elapsed time
Battery: One silver oxide battery (Type: SR726W)
Approximately 2 years on type SR726W (assuming 20 seconds alarm operation
per day).
Dual time (Seconds)
Dual Time indicator
Type B
3. When the setting you want to change is flashing, use B to change it as described
below.
Screen To do this:
Change the hour
Change the minute
Toggle between 12-hour ( ) and 24-hour ( )
4. Press C to exit the setting screen.
timekeeping
(Exit the setting screen) 12/24-Hour format
Do this:
Press B.
2
Loading...