Cascadia PLE1202709, PLE12048016 Operation Manual
DIGITAL VIDEO RECORDER
PLE Series
Server
Operation Manual
Please read these instructions and save this manual for future use
www.cascadiadvrt.com / (888) 421-0050
1
SAFETY INSTRUCTIONS
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
THIS PRODUCT HAS MULTIPLE-RATED VOLTAGES.
ADJUST POWER INPUT SELECTOR SWITCH PROPERLY ON REAR OF UNIT BEFORE CONNECTING TO
THE POWER SUPPLY.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.
8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide
blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles
and the points where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operat e normally, or has
been dropped.
NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense
IMPORTANT The only way to disconnect power completely is to unplug the power cord
Make sure at least one end of the power cord is within easy reach so that you can unplug the computer when
you need to
CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED REPLACE ONLY WITH THE SAME
OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER DISCARD USED BATTERIES ACCORDING TO
THE MANUFACTURER’S INSTRUCTIONS
WARNING:
To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall
not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed
on the apparatus.
www.cascadiadvrt.com / (888) 421-0050
2
Table of Contents
51. LAYOUT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
6FRONT VIEW ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
7REAR VIEWㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
82. DISPLAY ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
9ALARM ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
9BACKUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
9CASCADE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
9MAINTENANCE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
9SMART ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
103. SETUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
11RECORD ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
12EVENT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
13NETWORK ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
14USER ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
14CAMERA ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
15MAINTENANCE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
16STORAGE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
17CASCADE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
184. QUICK USE 1 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
19GETTING STARTED ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
20TIME & DATE ADJUSTMENT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
21DVR & REMOCON SETUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
22HOW TO UPGRADE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
235. QUICK USE 2 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
24FORCE RECORDING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
25SCHEDULE RECORDING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
266. QUICK USE 3 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
27QUICK PLAYBACK ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
28NORMAL PLAYBACK ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
www.cascadiadvrt.com / (888) 421-0050
29EVENT PLAYBACK ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
3
Table of Contents
307. QUICK USE 4 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
31STILL IAMGE SAVE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
32BACKUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
338. QUICK USE 5 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
34IP SETTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
35DDNS SETTING/WEB VIEWER CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
36E-MAIL SETTING & NOTIFICATOIN ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
37USER P/W SETTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
389. QUICK USE 6 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
39PRESET & EVENT TRACKING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
40MOTION, SENSOR & ALARM SETTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
41CONNECTING SENSOR ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
42CONNECTING ALARM ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
43CONNECTING PTZ ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
44CONNECTING EXTERNAL STORAGE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
45INSTALLATION EXAMPLE 1 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
46INSTALLATION EXAMPLE 2 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
4710. CLIENT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
48INSTALLATION & CONONNECTION ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
5011. CLIENT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
51SINGLE SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
52PTZ CONTROLㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
52LIVE JPG, BMP, AVI SAVE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
53CMS P/W SETTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
54CONFIG FILE SAVE/LOAD ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
www.cascadiadvrt.com / (888) 421-0050
4
1. LAYOUT
FRONT VIEW
www.cascadiadvrt.com / (888) 421-0050
REAR VIEW
5
FRONT VIEW
15
13
14
1 2 3 4 5 6
16 17 18
10
1. Display Button
Shows the Display menu.
2. Search Button
Go to the Search menu.
3. Setup Button
Go to the Setup menu.
4. PTZ Button
Pan / tilt a selected camera.
5. Zoom Button
Zoom In/Out at 1CH Layout mode.
6. Backup Button
Go to the Backup menu.
7. REC Button
Record all cameras manually for emergency.
8. Rotate / Hold Button
Rotates the Live Camera Display.
Hold the search speed with Jog & Shuttle.
9. Lock Button
Locks the DVR.
10. Playback Button
Play, Pause, Reverse, Stop, End, Start.
12
7
11
8
9
11. Jog Dial
Play recorded images frame by frame when this
dial is rotated.
12. Shuttle Ring
Play fast when this dial is rotated.
13. Direction / Camera Layout Button
Move the cursor on the menu and shows camera
Layout.
UP: 1CH Layout,
Right: 4CH Layout
Down: 9CH Layout
Left: 16CH Layout
14. Enter Button
Determine the setting values.
15. ESC Button
Go back to the previous status.
16. Power LED
Light up when power is on.
17. HDD LED
Light up when built-in HDD is working.
18. REC LED
Light up when Manual recording is on.
19
20
19. Power Button
20. USB Port
Plug USB memory stick Upgrade
Software or Save Data. (USB 2.0)
www.cascadiadvrt.com / (888) 421-0050
22
21
21. Camera Button
Choose a camera you want to see.
22. CD/DVD Eject Button
6
REAR VIEW
1. Camera Input Connectors
Connect cameras to these BNC connectors.
2. Camera Output Connectors (Loop Out)
These BNC connectors supply video signals looped
through the video input connectors.
3. Quad1
Show quad out (Fixed, Rotation) and a slave DVR
on an analogue monitor.
4. Quad2
Show quad out on analogue monitor.
(Fixed, Rotation)
5. Spot
Rotate a camera on an analogue monitor in order.
6. Cascade In/Out (BNC)
Connect with the CASCADE IN/OUT connector of
another DVR for image transmission when using
two or more units of DVR.
7. Audio Input Connectors (AUDIO IN 1 - 4)
Input audio signal supplied from an external
device such as a microphone amplifier.
8. IEEE1394
Connect to an external device like CD/DVD RW.
9. Audio Output Connector (AUDIO OUT)
Connect a speak for audio out.
13. USB (1.1)
Connect USB memory stick for Upgrade.
14. LAN (10/100BASE-T)
Connect this unit to a network compatible with
10BASET or 100BASE-Tx.
15. VGA
Connect a VGA monitor with this connector.
16. RS232 (SERIAL)
Connect a external device that supports this DSub 9-pin connector when controlling this unit.
17. PAL/NTSC
Chooses a PAL/NTSC video signal.
18. PTZ
Connect RS485 compatible combination
cameras with these port.
19. Cascade In/Out (RJ-11)
Connect with the cascade Out connector of
another DVR for command signal when using
two or more units of DVR.
20. RS422
Connect to Keypad.
21. ALARM IN
Connect an external device such as a sensor or
a door switch.
10. TV
Connect a monitor to BNC connector.
12. S-VHS
Connect a monitor to S-VHS connector.
www.cascadiadvrt.com / (888) 421-0050
22. ALARM OUT
Connect a control switch when controlling this
unit using an external device, or when
controlling an alarm device such as a buzzer or
a lamp.
7
2. DISPLAY
ALARM
BACKUP
CASCADE
MAINTENANCE
SMART
www.cascadiadvrt.com / (888) 421-0050
8
DISPLAY MENU
1. Press “DISPLAY”.
The SETUP MENU will be displayed. Move the
curser to highlight the “ALARM”, “BACKUP”,
MAINTENANCE”, “SMART” or “CASCADE”
Icon and press the “Enter” button to show the
appropriate information.
2. DISPLAY / ALARM
Turn On/Off alarm.
4. DISPLAY / CASCADE
Select the slave DVR that will show up on
Master DVR.
5. DISPLAY / MAINTENANCE
DVR ID = Set ID to communicate with Keyboard.
Keypad ID = Set ID to communicate with DVR.
Status Bar Top = Show the information bar
upward.
3. DISPLAY / BACKUP
Backup the recorded data with CD/DVD RW.
www.cascadiadvrt.com / (888) 421-0050
6. DISPLAY / SMART
Show HDD status. (Only information)
9
3. SETUP
RECORD
EVENT
NETWORK
USER
CAMERA
MAINTENANCE
STORAGE
CASCADE
www.cascadiadvrt.com / (888) 421-0050
10
SETUP - RECORD MENU
1. Press “SETUP”.
The SETUP MENU will be displayed.
2. SETUP / RECORD / RECORD
Size = Resolution, Fps – Recording speed
Quality = Recording Quality
Pre & Post Rec = Pre & Post Recording time
4. SETUP / RECORD / HOLIDAY
Select a date to designate a holiday.
NOTE:
Item selection: Move the cursor using the
arrow buttons.
Change the setting: Press “Enter” button.
Selecting a submenu: Select a submenu
using buttons and press “Enter”
button.
3. SETUP / RECORD / SCHEDULE
Set recording schedule for each camera.
www.cascadiadvrt.com / (888) 421-0050
NOTE:
Default P/W is “1111111”.
11
SETUP - EVENT MENU
1. Press “SETUP”.
The SETUP MENU will be displayed.
2. SETUP / EVENT / MOTION
Region = Motion set area
Sensitivity = Motion sensitivity
4. SETUP / EVENT / ALARM
Duration = Set alarm duration time.
5. SETUP / EVENT / ALARM
SCHEDULE
Set alarm schedule for each alarm.
NOTE:
Alarm goes off when alarm schedule is set.
3. SETUP / EVENT / SENSOR
Type = Normal Close, Normal Open
Preset = Link sensor with Preset function of
Camera
www.cascadiadvrt.com / (888) 421-0050
NOTE:
Item selection: Move the cursor using the
arrow buttons.
Change the setting: Press “Enter” button.
Selecting a submenu: Select a submenu
using the buttons and press “Enter”
button.
NOTE:
Default P/W is “1111111”.
12
SETUP / NETWORK MENU
1. Press “SETUP”.
The SETUP MENU will be displayed.
2. SETUP / NETWORK / IP SET
DVR Name = Show DVR name in network S/W.
4. SETUP / NETWORK / DDNS
DDNS Use = Support Dynamic IP.
Domain Name = Type ID to use Dynamic IP.
Use Local IP = Connect DVR in same local
network like LAN for DDNS.
Registry = Register the DDNS information.
5. SETUP / NETWORK / SERVER
Max. Connect = Number of Live Connected Users
Max. Search = Number of Live Connected Users
Network IMG Size = Resolution for network
transmission.
Network Fps = Network transmission speed.
Network Quality = Image quality for network
transmission.
3. SETUP / NETWORK / EMAIL
System Notify = Send email when DVR has
problem.
www.cascadiadvrt.com / (888) 421-0050
NOTE:
Item selection: Move the cursor using the
arrow buttons.
Change the setting: Press “Enter” button.
Selecting a submenu: Select a submenu
using buttons and press “Enter” button.
NOTE:
Default P/W is “1111111”.
13
SETUP / USER & CAMERA
MENU
1. Press “SETUP”.
The SETUP MENU will be displayed.
2. SETUP / USER
Permission = Give user access permission.
Hidden = Show/Hide camera.
3. SETUP / CAMERA / CAMERA
Enable = Camera On/Off.
PTZ = Camera Protocol.
ID = Camera PTZ ID.
4. SETUP / CAMERA / COLOR
Channel = Camera No.
www.cascadiadvrt.com / (888) 421-0050
NOTE:
Item selection: Move the cursor using the
arrow buttons.
Change the setting: Press “Enter” button.
Selecting a submenu: Select a submenu
using buttons and press “Enter” button.
NOTE:
Default P/W is “1111111”.
14
SETUP / MAINTENANCE
MENU
1. Press “SETUP”.
The SETUP MENU will be displayed.
2. SETUP / MAINTENANCE / SYSTEM
Transparency = Transparency of Menu Window.
Flicker = Flicker filter for TV Out.
Deinterlace = Anti aliasing Filter.
3. SETUP / MAINTENANCE / LOG
Show DVR working status.
NOTE:
Item selection: Move the cursor using the
arrow buttons.
Change the setting: Press “Enter” button.
Selecting a submenu: Select a submenu
using buttons and press “Enter” button.
NOTE:
Default P/W is “1111111”.
www.cascadiadvrt.com / (888) 421-0050
15
SETUP / STORAGE MENU
1. Press “SETUP”.
The SETUP MENU will be displayed.
2. SETUP / STORAGE / IDE
Show IDE device information.
Format = Format media on backup use.
4. SETUP / STORAGE / IEEE1394
Show IEEE1394 device information.
Format = Format media on backup use.
NOTE:
Item selection: Move the cursor using the
arrow buttons.
Change the setting: Press “Enter” button.
Selecting a submenu: Select a submenu
using buttons and press “Enter” button.
3. SETUP / STORAGE / USB
Show USB device information.
Format = Format media on backup use.
www.cascadiadvrt.com / (888) 421-0050
NOTE:
Default P/W is “1111111”.
16
SETUP - CASCADE MENU
1. Press the SETUP button.
The SETUP MENU will be displayed.
2. SETUP / CASCADE / CASCADE
Cascade Type = Set DVR as Master or Slave.
VGA/TV Out = Show slave DVR to VGA/TV out.
Quad1 = Show slave DVR to Quad1 out.
NOTE:
Item selection: Move the cursor using the
arrow buttons.
Change the setting: Press “Enter” button.
Selecting a submenu: Select a submenu
using buttons and press “Enter” button.
NOTE:
Default P/W is “1111111”.
www.cascadiadvrt.com / (888) 421-0050
17
4. QUICK USE
1
GETTING STARTED
TIME & DATE ADJUSTMENT
DVR & REMOCON ID SETUP
HOW TO UPGRADE
www.cascadiadvrt.com / (888) 421-0050
18
Loading...