Cascadia Digital Video Recorder, PXE Series Operation Manual

DIGITAL VIDEO RECORDER

PXE Series

Server

Operation Manual

Please read these instructions and save this manual for future use

www.cascadiadvrt.com / [phone]

1

SAFETY INSTRUCTIONS

CAUTION:

TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

THIS PRODUCT HAS MULTIPLE-RATED VOLTAGES.
ADJUST POWER INPUT SELECTOR SWITCH PROPERLY ON REAR OF UNIT BEFORE CONNECTING TO
THE POWER SUPPLY.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide
blade or the third prong are
provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles
and the points where they exit from the apparatus.

11) Only use attachments/accessories specified by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects fallen
into the apparatus, the apparatus has been exposed to rain or moisture, does not operat e normally, or has
been dropped.

NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC rules These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment This equipment generates, uses, and
can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may
cause harmful interference to radio communications Operation of this equipment in a residential area is likely to
cause harmful interference in which case the user will be required to correct the interference at his own expense

IMPORTANT The only way to disconnect power completely is to unplug the power cord
Make sure at least one end of the power cord is within easy reach so that you can unplug the computer when
you need to

CAUTION: DANGER OF EXPLOSION IF BATTERY IS INCORRECTLY REPLACED REPLACE ONLY WITH THE SAME
OR EQUIVALENT TYPE RECOMMENDED BY THE MANUFACTURER DISCARD USED BATTERIES ACCORDING TO
THE MANUFACTURER’S INSTRUCTIONS

WARNING:

To prevent fire or electric shock hazard, do not expose this appliance to rain or moisture. The apparatus shall
not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed
on the apparatus.

www.cascadiadvrt.com / [phone]

2

Table of Contents

61. LAYOUT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
7FRONT VIEW ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
8REAR VIEW ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

82. DISPLAY ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
10SYSTEM ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
11DISPLAY ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
12AUDIO ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
12ALARM ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
12PTZ ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
13CONTROL ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
14V-OUTPUT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
14LOG VIEW ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

153. SETUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

TIME ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
UPGRADE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
DISK ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
ETC ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

16CAMERA ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
17RECORD ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
18SCHEDULE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
19MOTION ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
19SENSOR ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
20ALARM ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
21NETWORK ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
23STORAGE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
24USER ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
25POS ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
26SYSTEM ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

284. A/S SETUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
29
29
29
29

CHECK ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

www.cascadiadvrt.com / [phone]

29

3

Table of Contents (cont.)

305. SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

CALENDAR ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
VIDEO MAP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
EXPORT IMG ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
EXPORT AVI ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
SMART ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

HOW TO UPGRADE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ 36

MANUAL RECORDING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
SCHEDULE RECORDING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

NORMAL SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

31
31
32
32
32

336. QUICK USE 1 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
34TIME/DATE ADJUSTMENT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
35DVR/REMOTE CONTROLLER ID SETUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

377. QUICK USE 2 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
38
39

408. QUICK USE 3 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
41

SMART SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
TEXT SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

www.cascadiadvrt.com / [phone]

4

42
43

449. QUICK USE 4 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
45JPG, BMP, AVI SAVE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
46BACKUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

4710. QUICK USE 5 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
48IP SETTING/CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
50DDNS/WEB VIEWER CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
51PDNS CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
53E-MAIL SETTING/NOTIFICATION ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
54USER PASSWORD SETTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

Table of Contents (cont.)

5511. QUICK USE 6 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

PRESET/EVENT TRACKING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
MOTION, SENSOR / ALARM SETTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
SENSOR CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
ALARM CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

EXTERNAL STORAGE CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

SURVEILLANCE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

56
57
59
60
61PTZ CONNECTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
63POS SETTING ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
64

6512. CLIENT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
66CLIENT INSTALLATION/CONNECTION ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

6713. CLIENT SURVEILLANCE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
68

7014. CLIENT SEARCH ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
71

www.cascadiadvrt.com / [phone]

5

7215. QUICK USE 7 ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
73PRINT ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
74JPG, BMP SAVE ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ
75BACKUP ㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡㅡ

1. LAYOUT

FRONT VIEW

www.cascadiadvrt.com / [phone]

REAR VIEW

6

FRONT VIEW

15

13

14

1 2 3 4 5 6

16 17 18

10

1. Display Button

Shows the Display menu.

2. Search Button

Go to the Search menu.

3. Setup Button

Go to the Setup menu.

4. PTZ Button

Pan / tilt a selected camera.

5. Zoom Button

Zoom In/Out at 1CH Layout mode.

6. Backup Button

Go to the Backup menu.

7. REC Button

Record all cameras manually for emergency.

8. Rotate / Hold Button

Rotates the Live Camera Display.
Hold the search speed with Jog & Shuttle.

9. Lock Button

Locks the DVR.

10. Playback Button

Play, Pause, Reverse, Stop, End, Start.

12

7

11

8

9

11. Jog Dial

Play recorded images frame by frame when this
dial is rotated.

12. Shuttle Ring

Play fast when this dial is rotated.

13. Direction / Camera Layout Button

Move the cursor on the menu and shows camera
Layout.
UP: 1CH Layout,
Right: 4CH Layout
Down: 9CH Layout
Left: 16CH Layout

14. Enter Button

Determine the setting values.

15. ESC Button

Go back to the previous status.

16. Power LED

Light up when power is on.

17. HDD LED

Light up when built-in HDD is working.

18. REC LED

Light up when Manual recording is on.

19

20

19. Power Button

20. USB Port

Plug USB memory stick Upgrade
Software or Save Data. (USB 2.0)

www.cascadiadvrt.com / [phone]

22

21

21. Camera Button

Choose a camera you want to see.

22. CD/DVD Eject Button

7

REAR VIEW

Rear View

1. Camera Input Connectors

Connect cameras to these BNC connectors.

2. Camera Output Connectors (Loop Out)

These BNC connectors supply video signals looped
through the video input connectors.

3. Mic In

Connect a microphone to communication between DVR
and Client S/W.

4. Line Out

Connect a speaker for audio out.

5. S-Video

Connect a monitor to S-VHS connector.

6. VGA

Connect a VGA monitor with this connector.

7. USB (2.0)

Connect USB memory stick for Upgrade and for external
device like CD/DVD and other devices.

8. LAN (10/100BASE-T)

Connect this unit to a network compatible with
10BASET or 100BASE-Tx.

9. IEEE1394

Connect to an external device like CD/DVD RW.

10. CONFIG (UP-OFF, DOWN –ON)

1. NTSC(OFF)/PAL(ON)

2. ① – 485(OFF)/422(ON)

3. ② – 120ohm Termination (ON)

4. ③ – 120ohm Termination (ON)

11. RS422/485

Connect a keyboard or PTZ.

12. ② RS-485

Connect a device using RS485 connector. Support
120 ohm termination.
Refer to No. 10, CONFIG setting.

13. ③ RS-485 (Cascade In/Out)

Connect with the cascade Out connector of another
DVR for communication.

14. RS232C

Connect a device that support RS232C like PTZ or
POS.

15. Spot 1

Show quad out on an analogue monitor.
(Fixed, Rotation) (1X1, 2X2)

16. Spot 2

Show quad out on analogue monitor.
(Fixed, Rotation) (1X1, 2X2, 3X3, 4X4)

17. Cascade In/Out (BNC)

Connect with the CASCADE IN/OUT connector of
another DVR for image transmission.

18. Audio Input Connectors (AUDIO IN 1 - 4)

Input audio signal supplied from an external device
such as a microphone amplifier.

19. SENSOR (ALARM IN)

Connect an external device such as a sensor or a
door switch.

20. Alarm Out

Connect a control switch when controlling this unit
using an external device, or when controlling an
alarm device such as a buzzer or a lamp.

www.cascadiadvrt.com / [phone]

8

2. DISPLAY

www.cascadiadvrt.com / [phone]

9

DISPLAY / SYSTEM MENU

1. Press “DISPLAY”

The DISPLAY MENU will be displayed. Move the
curser to h

the “Enter” button to show the system
information.

2. DISPLAY / SYSTEM

ighlight the “SYSTEM” Icon and press

4. DISPLAY / SYSTEM / S/W VER.

Move the curser to highlight the “S/W VER.”
Icon and press the “Enter” button to display

S/W version.

the

5. DISPLAY / SYSTEM / H/W VER.

Move the curser to highlight the “H/W VER.”
Icon and press the “Enter” button to display the
H/W version.

3. DISPLAY / SYSTEM / REC.DATE

Move the curser to highlight the “REC. DATE”
Icon and press the “Enter” button to show

oldest recorded date on each camera.

www.cascadiadvrt.com / [phone]

the

10

DISPLAY / DISPLAY MENU

1. Press “DISPLAY”

The DISPLAY MENU will be displayed. Move the
curser to highlight the “DISPLAY” Icon and
press the “Enter” button to show the display
information.

2. DISPLAY / DISPLAY

Rotation: Camera split rotation.
Event Popup: Pop up on motion, sensor &

POS.

Status: Show the information bar on live mode.

3. DISPLAY / DISPLAY / LAYOUT

Layout: Default camera screen division layout
Width Margin: status bar margin width
Height Margin: status bar margin height

4. DISPLAY / DISPLAY / POS

Live Mode Display: Shows the POS information

on live mode (On/Off).
Popup Display: Pops up the POS information
with a camera (On/Off).
Display Duration: Sets the pop up duration time
of the POS information (seconds).

www.cascadiadvrt.com / [phone]

11

DISPLAY / AUDIO, ALARM,
PTZ MENU

1. Press “DISPLAY”

The DISPLAY MENU will be displayed. Move the
curser to highlight the “AUDIO” Icon, “ALARM”
Icon or “PTZ” Icon and press the “Enter” button
to show the appropriate information.

4. DISPLAY / PTZ

Control a PTZ camera.

3. DISPLAY / ALARM

Alarm On/Off.

2. DISPLAY / AUDIO

Channel: Select an audio CH No.
Beep: Beep On/Off on system warning.

5. DISPLAY / PTZ / ADDITION

Show an additional PTZ camera menu.

www.cascadiadvrt.com / [phone]

12

DISPLAY / CONTROL MENU

1. Press “DISPLAY”

The DISPLAY MENU will be displayed. Move the
curser to highlight the “CONTROL” Icon and
press the “Enter” button to show the control
information.

3. DISPLAY / CONTROL / CASCADE

Cascade Type: Set a DVR to Master or Slave.
Slave Select: Select a slave DVR No. to show

on monitor.
Cascade Output: Select an output to show on
cascade output.

2. DISPLAY / CONTROL

Remote CTRL ID: Remote controller ID.
Beep: Remote controller Beep On/Off.
Keypad Set: Keypad use On/Off
Keypad ID: Set a keypad ID.
DVR ID: Set a DVR ID.

www.cascadiadvrt.com / [phone]

13

DISPLAY / V-OUTPUT,
LOG VIEW MENU

1. Press “DISPLAY”

The DISPLAY MENU will be displayed. Move the
curser to highlight the “V-OUTPUT” Icon or
“LOG VIEW” Icon and press the “Enter” button
to show the appropriate information.

NOTE:

Spot1 = Support 1X1,2X2 layout.
Spot2 = Support 1X1, 2X2, 3X3, 4X4 layout.

3. DISPLAY / LOG VIEW

Show the log information of DVR.

2. DISPLAY / V-OUTPUT

Mode: Select a fixed and rotation mode for

spot.
Camera: Select a camera layout.

www.cascadiadvrt.com / [phone]

14

3. SETUP

CAMERA
RECORD

SCHEDULE

MOTION

SENSOR

ALARM

NETWORK

STORAGE

USER

POS

www.cascadiadvrt.com / [phone]

15

SYSTEM

EVENT

SETUP / CAMERA MENU

1. Press” SETUP”

The SETUP MENU will be displayed. Move the
curser to highlight the “CAMERA” Icon and
press the “Enter” button to show the camera
information.

2. SETUP / CAMERA

On/Off: Camera On/Off.
Audio: Audio = On/Off, Size = Resolution.

4. SETUP / CAMERA / PTZ

Set a camera protocol, ID and Port.

5. SETUP / CAMERA / EVENT

Set a remote transmission, e-mail and beep on
no video signal.

3. SETUP / CAMERA / COLOR

Set a color of camera.

www.cascadiadvrt.com / [phone]

NOTE:

Item selection: Move the cursor using the

arrow buttons.

Change the setting: Press “Enter” button.

NOTE:

Default P/W is “0”.

16

SETUP / RECORD MENU

1. Press “SETUP”

The SETUP MENU will be displayed. Move the
curser to highlight the “RECORD” Icon and
press the “Enter” button to show the record
information.

2. SETUP / RECORD

Fps = Recording speed
Quality = Image Quality
Mode = Compression
(MP4+ = Network Priority, MP4 = Image size
Priority)
Post & Pre = Post & Pre recording

3. SETUP / RECORD / EVENT FPS

Motion FPS = Recording speed of Motion.
Sensor FPS = Recording speed of Sensor.
Text FPS = Recording speed of POS.

4. SETUP / RECORD / OPTION

Watermark = Watermarking recording data per
camera.
Deinterlace = Anti aliasing filter.

www.cascadiadvrt.com / [phone]

NOTE:

Item selection: Move the cursor using the

arrow buttons.

Change the setting: Press “Enter” button.

NOTE:

Default P/W is “0”.

17

SETUP - SCHEDULE MENU

1. Press “SETUP”

The SETUP MENU will be displayed. Move the
curser to highlight the “SCHEDULE” Icon and
press the “Enter” button to show the schedule
information.

2. SETUP / SCHEDULE

Set a schedule for each camera.

3. SETUP / SCHEDULE / SPECIALITY /
NOISE

Recording speed will be changed when noise
schedule is set.
It’s effective to save HDD capacity for night
time.

4. SETUP / SCHEDULE / SPECIALITY /
ALARM

Set an alarm schedule for each alarm.
Alarm goes off when alarm schedule is set.

www.cascadiadvrt.com / [phone]

5. SETUP / SCHEDULE / HOLIDAY

Set a schedule for holiday.

18

SETUP / MOTION, SENSOR
MENU

1. Press “SETUP”

The SETUP MENU will be displayed. Move the
curser to highlight the “MOTION” or
“SCHEDULE” Icon and press the “Enter” button
to show the appropriate information.

2. SETUP / MOTION

Set a motion area and sensitivity.

4. SETUP / SENSOR

Type: Sensor type (N/C, N/O).
Camera: Select a linked camera for each

sensor.

5. SETUP / SENSOR / EVENT

Set a remote transmission, e-mail, beep and
alarm on sensor.

3. SETUP / MOTION / EVENT

Set a remote transmission, e-mail, beep and
alarm on motion.

www.cascadiadvrt.com / [phone]

NOTE:

Item selection: Move the cursor using the arrow
buttons.

Change the setting: Press “Enter” button.

NOTE:

Default P/W is “0”.

19

SETUP / ALARM MENU

1. Press “SETUP”

The SETUP MENU will be displayed. Move the
curser to highlight the “ALARM” Icon and press
the “Enter” button to show the alarm
information.

2. SETUP / ALARM

Type: Alarm type (N/C, N/O).
Duration: Set an alarm duration.

NOTE:

Item selection: Move the cursor using the arrow

buttons.

Change the setting: Press “Enter” button.

NOTE:

Default P/W is “0”.

www.cascadiadvrt.com / [phone]

20

SETUP / NETWORK MENU

1. Press “SETUP”

The SETUP MENU will be displayed. Move the
curser to highlight the “NETWORK” Icon and
press the “Enter” button to show the network
information.

3. SETUP / NETWORK / LAN

It has two LAN. (LAN1, LAN2)
One will be used for future use like NAS.
The other is for normal network connection.

4. SETUP / NETWORK / E-MAIL

SMTP: Input a Mail Server IP.
SMTP ID: Input a SMTP ID.
SMTP P/W: Input a SMTP P/W.
SMTP Sender: Input a sender’s mail address.

2. SETUP / NETWORK

DVR Name: Type an DVR name.
Network Type: Select a network type.
Web Server: Web Viewer On/Off.
Network Image Quality: Image quality for

network transmission.

NOTE:

Item selection: Move the cursor using the arrow

buttons.

Change the setting: Press “Enter” button.

NOTE:

Default P/W is “0”.

www.cascadiadvrt.com / [phone]

21

SETUP / NETWORK MENU
(cont.)

4. SETUP / NETWORK / EX DNS / PDNS

Support a Dynamic IP address with Client connection
S/W.
PDNS Name: Type a DVR name for PDNS server
recognition.
Register: Register a DVR ID on PDNS server.

5. SETUP / NETWORK / EX DNS / DDNS

Support a Dynamic IP address with internet explorer.
DDNS Name: Type a DVR name for DDNS server
recognition.

Use Local IP: Set “ON” to use DDNS only in LAN.
Register: Register a DDNS name on DDNS server.

NOTE:

Item selection: Move the cursor using the

arrow buttons.

Change the setting: Press “Enter” button.

NOTE:

Default P/W is “0”.

www.cascadiadvrt.com / [phone]

22

SETUP / STORAGE MENU

1. Press “SETUP”

The SETUP MENU will be displayed. Move the
curser to highlight the “STORAGE” Icon and
press the “Enter” button to show the storage
information.

2. SETUP / STORAGE

Type: Select a HDD as Data, Backup, Auto

Backup and Mirroring.

Position: Show a device type like IDE, IEEE etc.
Volume: Capacity.

3. SETUP / STORAGE / DATABASE

Privacy Period: Set a data keeping time on DVR.
Auto Backup: Select a camera No. for auto backup.

NOTE:

Item selection: Move the cursor using the

arrow buttons.

Change the setting: Press “Enter” button.

NOTE:

Default P/W is “0”.

www.cascadiadvrt.com / [phone]

23

SETUP / USER MENU

1. Press “SETUP”

The SETUP MENU will be displayed. Move the
curser to highlight the “USER” Icon and press
the “Enter” button to show the user information.

3. SETUP / USER / CAMERA

Set a camera use for each user.

NOTE:

Item selection: Move the cursor using the arrow
buttons.

Change the setting: Press “Enter” button.

2. SETUP / USER

Set a user authority like P/W, Setup, PTZ,
Search and Backup.

NOTE:

Default P/W is “0”.

www.cascadiadvrt.com / [phone]

24